Berk Technology HFCs gain +19whp + 18wtq!

u155282 · 02-25-2009, 10:27 PM

*no disrespect intended DDM, just looking for more perspective*

My question through PM was if I'll have any fitment or other issues with a Cali spec car. Maybe someone can shed some light? I'm asking because when I bought headers and a cat-back for my 03 eclipse the hangers had to be reset. I won't be living in California too much longer so I could just wait and buy the car in another state, but I'd rather not if I don't have too.

kdo2milger · 02-26-2009, 02:37 AM

My Thoughts:

These Berk HFCs along with a Stillen Gen3 CAI, and either Stillen or GTM Catback should clear the fairladys throat quite well.

Well enough to yield a possible 28 to 34 rwhp gain, im guessing 32rwhp total.

These mods with a good tune should get us in the 39 to 44 rwhp range!

my numbers are total guesses mind you

BerkTech · 02-26-2009, 12:56 PM

Quote:

Originally Posted by u155282

*no disrespect intended DDM, just looking for more perspective*

My question through PM was if I'll have any fitment or other issues with a Cali spec car. Maybe someone can shed some light? I'm asking because when I bought headers and a cat-back for my 03 eclipse the hangers had to be reset. I won't be living in California too much longer so I could just wait and buy the car in another state, but I'd rather not if I don't have too.

These will fit all 370Z's. There is no difference between any of these 370Z's. CA, 49 state, JDM, European, etc. They are all the same HFC wise.

Black kNight · 02-26-2009, 02:28 PM

Quote:

Originally Posted by BerkTech

These will fit all 370Z's. There is no difference between any of these 370Z's. CA, 49 state, JDM, European, etc. They are all the same HFC wise.

gd so I can buy HFC for my car in future

M.Bonanni · 02-26-2009, 05:10 PM

Quote:

Originally Posted by Black kNight

gd so I can buy HFC for my car in future

Better hurry, group buy ends in 48 hours

.

kdo2milger · 02-27-2009, 08:43 AM

i want these, however i wont take delivery until end of june early july...

bummer, hopefully there will be another gp then

spiderman · 02-28-2009, 10:25 AM

Quote:

Originally Posted by DDMotorsports

Better hurry, group buy ends in 48 hours

.

Unfortunately my 370Z doesn't come in until April/May. I see the Berk HFC's for $495, hopefully you will sell them cheaper with free S&H. Is this a pure bolt on? Will the Stillen Cat Back Exhaust bolt onto these?

DIGItonium · 02-27-2009, 01:28 PM

I won't take delivery until April, but I'm getting in on whatever deals I can get!!! It is bagged up and sitting underneath my desk at the moment.

Minicobra1 · 03-06-2009, 02:44 PM

DDM, Can you PM me a price on these and availability. Also, I have the Nismo catback, will I have any problem bolting these up myself??

M.Bonanni · 03-06-2009, 02:54 PM

Quote:

Originally Posted by Minicobra1

DDM, Can you PM me a price on these and availability. Also, I have the Nismo catback, will I have any problem bolting these up myself??

PM sent.

They will bolt up to your Nismo exhaust no problem.

spiderman · 03-09-2009, 10:14 AM

DDM - please PM me your price for the Berk HFC's as I'd like to add this set-up when my 370Z comes in. Please specify if S&H is included. Others are selling this for $494 with free S&H. Thanks!

M.Bonanni · 03-09-2009, 10:35 AM

pm sent

ssqpolo · 03-09-2009, 12:27 PM

got my test pipes in!! can't wait to install them this weekend! will keep you all updated. hopefully i wont break all of my tools trying to take off the stock cats

Denny McLain · 03-09-2009, 03:38 PM

Quote:

Originally Posted by ssqpolo

got my test pipes in!! can't wait to install them this weekend! will keep you all updated. hopefully i wont break all of my tools trying to take off the stock cats

Do us all a favor and dyno the car instead of posting a sound clip.

I personally picked up 13 hp and 4 ftlbs torque from the addition of cats and Y-pipe. Every car is different, but my Vette usually picked up 5-6 hp on the top end from aftermaket cats vs straight pipes. Also post your fuel/air as mine improved a great deal below 5000 rpm but still stayed around 12 to 1 over that rpm. Typically you see the free flowing effect more at higher rpm were more cfm is flowed.

M.Bonanni · 03-09-2009, 03:46 PM

Quote:

Originally Posted by Denny McLain

I personally picked up 13 hp and 4 ftlbs torque

Thats interesting... Horsepower isn't crazy bad but only 4 ft.lbs. of torque?

02-27-2009, 01:28 PM	#8 (permalink)
DIGItonium A True Z Fanatic Join Date: Jan 2009 Location: Kansas Posts: 3,800 Drives: 09 Z34-TT 6MT Rep Power: 43	I won't take delivery until April, but I'm getting in on whatever deals I can get!!! It is bagged up and sitting underneath my desk at the moment. __________________

03-06-2009, 02:44 PM	#9 (permalink)
Minicobra1 A True Z Fanatic Join Date: Nov 2008 Location: Orange County, CA. Posts: 1,205 Drives: 370Z Tour, Spt, 6mt Rep Power: 645	DDM, Can you PM me a price on these and availability. Also, I have the Nismo catback, will I have any problem bolting these up myself?? __________________ 370z Tour\| Spt Pack\|Navi\|BERK CBE\|Berk HFC's\| Eibach Springs\| Hotchkis Sway Bars\|SPC Camber Arms\|15mm Ichiba Wheel Spacers\| 19"Factory Nismo Wheels-Matt Black\|Stop Tech Rotors\|TWM Shifter\|3M Tint\|Black Fangs\|Black Rear Valance\|JDM Fog Light\| MY BAND-www.myspace.com/petroleum

03-09-2009, 10:14 AM	#11 (permalink)
spiderman Base Member Join Date: Feb 2009 Location: Ellicott City, MD Posts: 57 Drives: PG Touring/Sport/6M Rep Power: 269	DDM - please PM me your price for the Berk HFC's as I'd like to add this set-up when my 370Z comes in. Please specify if S&H is included. Others are selling this for $494 with free S&H. Thanks! __________________ *grateful to be alive ... grateful to drive!*

03-09-2009, 10:35 AM	#12 (permalink)
M.Bonanni The370Z.com Sponsor Join Date: Nov 2008 Location: Las Vegas Posts: 2,575 Drives: Fast Rep Power: 1321	pm sent __________________ MikeBonanni.com Twitter: http://www.twitter.com/MikeBonanni Facebook: http://www.facebook.com/MBonanni36 Function > Form

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Berk Technology HFC Install	M.Bonanni	DIY Section (Do-It-Yourself)	203	08-03-2018 05:12 AM
370Z SynchroRev Match Technology Video from Nissan 12.22.08	AK370Z	Nissan 370Z General Discussions	10	12-26-2008 04:08 AM
Jim Wolf Technology Intake for $395	AK370Z	Intake/Exhaust	17	12-10-2008 06:28 PM

02-25-2009, 10:27 PM	#1 (permalink)
u155282 Banned Join Date: Jan 2009 Location: Enid, OK Posts: 136 Drives: stanglangling Rep Power: 0	no disrespect intended DDM, just looking for more perspective My question through PM was if I'll have any fitment or other issues with a Cali spec car. Maybe someone can shed some light? I'm asking because when I bought headers and a cat-back for my 03 eclipse the hangers had to be reset. I won't be living in California too much longer so I could just wait and buy the car in another state, but I'd rather not if I don't have too.

02-26-2009, 02:37 AM	#2 (permalink)
kdo2milger OG Priesthood Join Date: Feb 2009 Location: Fargo, ND Posts: 17,859 Drives: NISMO T Rep Power: 60	My Thoughts: These Berk HFCs along with a Stillen Gen3 CAI, and either Stillen or GTM Catback should clear the fairladys throat quite well. Well enough to yield a possible 28 to 34 rwhp gain, im guessing 32rwhp total. These mods with a good tune should get us in the 39 to 44 rwhp range! my numbers are total guesses mind you

02-27-2009, 08:43 AM	#6 (permalink)
kdo2milger OG Priesthood Join Date: Feb 2009 Location: Fargo, ND Posts: 17,859 Drives: NISMO T Rep Power: 60	i want these, however i wont take delivery until end of june early july... bummer, hopefully there will be another gp then

03-09-2009, 12:27 PM	#13 (permalink)
ssqpolo Track Member Join Date: Jan 2009 Location: Florida Posts: 882 Drives: '12 Black Nismo Rep Power: 268	got my test pipes in!! can't wait to install them this weekend! will keep you all updated. hopefully i wont break all of my tools trying to take off the stock cats