Intake, Header, HFC, CBE = Too Lean?

Smallywood Intake, Header, HFC, CBE =... 03-23-2010, 08:35 PM

NewlyIMPORTed idk alot of people are... 03-23-2010, 09:27 PM

spearfish25 Stillen guys told me that all... 03-23-2010, 09:28 PM

NewlyIMPORTed are you fine just running... 03-23-2010, 09:28 PM

spearfish25 According to them, yes. ... 03-23-2010, 09:37 PM

Zsteve when I first got my car the... 03-23-2010, 09:44 PM

NewlyIMPORTed dang i guess after I install... 03-23-2010, 09:47 PM

Supergoji i thought the all powerful... 03-23-2010, 10:01 PM

kannibul To a point, like most ECU's. 03-24-2010, 08:13 AM

F.I. Inc. I have done extensive dyno... 03-23-2010, 10:05 PM

Xan How come some threads and... 03-23-2010, 10:22 PM

m4a1mustang That's over stock, so they... 03-23-2010, 10:37 PM

F.I. Inc. The numbers are impressive... 03-23-2010, 11:03 PM

Nikon FM Nice thread! I'm running... 03-23-2010, 11:35 PM

More replies below current depth...

LateralG\'z I am betting they make a... 03-23-2010, 11:28 PM

m4a1mustang The stock air boxes are cold... 03-23-2010, 11:53 PM

BOLIO 671 Very good counter response... 03-24-2010, 07:46 AM

Smallywood My understanding is that the... 03-24-2010, 04:56 AM

Vegitto-kun what is running lean? I... 03-24-2010, 06:09 AM

Modshack Ideal Air/Fuel ratios for a... 03-24-2010, 07:49 AM

F.I. Inc. I totally agree. On my TT... 03-24-2010, 09:51 AM

semtex In simple terms -- too much... 03-24-2010, 07:54 AM

Vegitto-kun damnit so if I get HFC +... 03-24-2010, 07:53 AM

F.I. Inc. No you do not. If you run... 03-24-2010, 10:06 AM

chris410 Well said Tony, everyone... 03-26-2010, 01:19 PM

semtex I disagree. I started off... 03-26-2010, 01:38 PM

chris410 No, what I meant is that IF... 03-26-2010, 06:20 PM

Red370 Self admittedly, I know jack... 03-24-2010, 08:05 AM

F.I. Inc. You are fine! Optimum A/F... 03-24-2010, 09:48 AM

Modshack There are 2 fuel control... 03-24-2010, 09:57 AM

Red370 Tis why I love this forum,... 03-24-2010, 10:02 AM

Zsteve And you read me at the same... 03-24-2010, 09:26 PM

mrdino77 Wow I just learned a lot by... 03-25-2010, 09:38 AM

semtex Just dyno your car after you... 03-25-2010, 09:48 AM

F.I. Inc. Good analogy about the blood... 03-25-2010, 09:58 AM

Zsteve Im not sure if this means I... 03-25-2010, 10:43 AM

m4a1mustang Tony, thoughts on the injen... 03-24-2010, 10:13 AM

Modshack It's not the diameter of the... 03-24-2010, 10:29 AM

F.I. Inc. Very impressive, you should... 03-24-2010, 10:38 AM

F.I. Inc. As far as fitment, quality... 03-24-2010, 10:35 AM

LiquidZ Still waiting on those... 03-24-2010, 10:15 AM

Vegitto-kun Ha...ha...ha I already got... 03-24-2010, 10:20 AM

CrownR426 A tune seems like a great... 03-24-2010, 10:36 AM

Vegitto-kun problem now is where the hell... 03-24-2010, 10:39 AM

Diocletian So, I have the Injen intakes... 03-24-2010, 11:17 AM

Smallywood You can add either the... 03-24-2010, 12:37 PM

Vegitto-kun wait so HFC/test pipes and... 03-24-2010, 02:01 PM

kannibul Long Tube Headers replace the... 03-24-2010, 02:06 PM

Vegitto-kun I see. so lets say I go... 03-24-2010, 02:08 PM

semtex It would certainly be... 03-24-2010, 02:09 PM

Smallywood Does anyone have a dyno chart... 03-24-2010, 08:33 PM

Vegitto-kun problem here is. finding a... 03-25-2010, 10:40 AM

Zsteve The maps that come with the... 03-25-2010, 10:47 AM

semtex :iagree: VK, another option... 03-25-2010, 10:57 AM

Diocletian Wow I didn't know you could... 03-25-2010, 01:01 PM

More replies below current depth...

semtex UpRev - Engine Management... 03-25-2010, 02:34 PM

Vegitto-kun interesting. is it quite easy... 03-25-2010, 02:42 PM

semtex It's under your dash,... 03-25-2010, 02:45 PM

Red370 under the steering wheel,... 03-25-2010, 02:46 PM

Red370 Also keep in mind, that with... 03-25-2010, 03:12 PM

Zsteve Now what I need since I dont... 03-25-2010, 03:33 PM

theDreamer I will dyno tune, hoping to... 03-25-2010, 03:42 PM

Zsteve think you could do a dyno... 03-25-2010, 03:44 PM

semtex You mean with the base... 03-25-2010, 03:46 PM

Zsteve Yea a dyno after they load... 03-25-2010, 03:47 PM

More replies below current depth...

4r3s wow this thread is awesome,... 03-25-2010, 03:46 PM

Red370 yeah i'd like to see that... 03-25-2010, 03:50 PM

theDreamer Semtex is right, they have to... 03-25-2010, 03:51 PM

Zsteve Oh OK I guess I was under the... 03-25-2010, 03:55 PM

Zsteve so to find if Im running lean... 03-25-2010, 04:02 PM

semtex Doesn't Cobb log the data as... 03-25-2010, 04:03 PM

Zsteve Im not sure I will see when I... 03-25-2010, 04:06 PM

semtex Hmm...Well, if you think of a... 03-25-2010, 04:08 PM

Red370 You would think that it would... 03-25-2010, 04:09 PM

Red370 quick question since we're on... 03-25-2010, 04:04 PM

theDreamer CobbTuning.com - AccessPORT >... 03-25-2010, 04:09 PM

Red370 never noticed that, i <3... 03-25-2010, 04:11 PM

Zsteve Alex when you did your AFR... 03-25-2010, 04:10 PM

Red370 I never had them read on a... 03-25-2010, 04:12 PM

Zsteve I'll ask AA how to logg that... 03-25-2010, 04:15 PM

Red370 Oh i know it logs on the... 03-25-2010, 04:19 PM

Zsteve Im waiting on mine right now... 03-25-2010, 04:55 PM

Red370 Did some datalogging today,... 03-26-2010, 12:55 PM

semtex Hmm...kinda hard to tell. I... 03-26-2010, 01:03 PM

Modshack In addition, first gear is a... 03-26-2010, 01:08 PM

semtex :iagree: I missed the part... 03-26-2010, 01:09 PM

Red370 Oh ok, i'll try to get it out... 03-26-2010, 01:29 PM

KEVTEX +1 rep for lots of real... 03-26-2010, 03:45 PM

Red370 ouch, somebody just got... 03-26-2010, 04:26 PM

Zsteve so semtex is your AFR... 03-26-2010, 05:10 PM

F.I. Inc. The higher the number the... 03-26-2010, 05:40 PM

F.I. Inc. To add another thing, you... 03-26-2010, 05:46 PM

kevin.z i believe sharif or tony from... 03-26-2010, 05:19 PM

theDreamer Correct, at idle it might run... 03-26-2010, 05:23 PM

G37Sam The Stoichiometric (ideal)... 03-26-2010, 05:36 PM

Nitex Well it seems this thread may... 03-26-2010, 05:43 PM

F.I. Inc. Well from reading this:... 03-26-2010, 05:54 PM

Nitex Ahh great thanks! I can... 03-27-2010, 10:14 AM

theDreamer You have not done any damage,... 03-27-2010, 11:38 AM

F.I. Inc. Hopefully you know I wasn't... 03-27-2010, 01:17 PM

More replies below current depth...

Zsteve I will check it again tonight... 03-26-2010, 05:57 PM

chris410 When you tune, don't aim for... 03-26-2010, 06:29 PM

NewlyIMPORTed so basically once I put my... 03-26-2010, 11:14 PM

chris410 The "safe" thing to do would... 03-27-2010, 08:13 AM

Zsteve The tunes really do help... 03-27-2010, 04:15 PM

Nick911sc This thread was super... 03-29-2010, 09:44 PM

Zsteve you will be fine without a... 03-29-2010, 11:53 PM

Daishi From what I can tell by... 04-27-2010, 07:22 PM

Zsteve Not sure what the thickness... 04-27-2010, 09:38 PM

Daishi Zsteve that's exactly what I... 04-28-2010, 07:06 AM

BalanBro That's right. A larger pipe... 04-28-2010, 10:37 PM

neveucd Ok I am pretty much... 04-29-2010, 10:29 PM

semtex Your gains are actually... 04-30-2010, 07:32 AM

Push370zzz Did I just miss...or was... 04-28-2010, 12:11 PM

G37Sam Pic is too small bro 04-30-2010, 05:18 AM

Vegitto-kun And even if the dyno reads... 04-30-2010, 07:44 AM

Diocletian He listed he has an Injen... 04-30-2010, 07:57 AM

semtex Oh, sorry I missed that. I... 04-30-2010, 08:01 AM

Diocletian There isn't that much... 04-30-2010, 08:07 AM

m4a1mustang Keep in mind that some dynos... 04-30-2010, 08:09 AM

Vegitto-kun so which one is actually... 04-30-2010, 08:10 AM

m4a1mustang That's open to debate. 04-30-2010, 08:11 AM

ImportConvert No it's not, the one that is... 01-04-2012, 02:19 AM

m4a1mustang If it wasn't open to debate... 01-04-2012, 08:55 AM

semtex I don't think there's a... 04-30-2010, 08:14 AM

m4a1mustang But we all know if you want... 04-30-2010, 08:15 AM

semtex Or a DynaPak, if you're just... 04-30-2010, 08:16 AM

m4a1mustang :icon18: I do need to head... 04-30-2010, 08:17 AM

Vegitto-kun I just did a dyno test on a... 04-30-2010, 08:49 AM

neveucd This was a mustang dyno,... 04-30-2010, 09:19 AM

neveucd And no I didn't dyno... 04-30-2010, 09:23 AM

semtex I think your estimate of... 04-30-2010, 09:31 AM

neveucd Oh ok, damn I wanted your... 04-30-2010, 09:54 AM

semtex Another member has a set for... 04-30-2010, 09:56 AM

neveucd Another thing I'm wondering,... 04-30-2010, 01:40 PM

semtex Are you asking me? 04-30-2010, 01:50 PM

neveucd Yes sorry forgot to quote,... 04-30-2010, 02:10 PM

semtex I had to ask for it. My... 04-30-2010, 02:18 PM

tonybui Semtex, should i expect... 01-03-2012, 11:25 PM

370Z JT ^no. You get 5 maps. 01-03-2012, 11:32 PM

ImportConvert I just read page 1, but from... 01-04-2012, 02:17 AM

semtex Holy thread bump. What are... 01-04-2012, 08:51 AM

m4a1mustang I had to go back and read the... 01-04-2012, 08:55 AM

chris410 It would be nice to compile a... 01-09-2012, 10:58 AM

The Dimer Interested in a K&N +... 01-09-2012, 11:28 AM

darionlear I have stillen Gen 3, Z1 test... 01-09-2012, 11:31 AM

tranceformer I have HPS post maf tubes +... 01-09-2012, 11:32 AM

The Dimer Does that mean your AFR was... 01-09-2012, 12:40 PM

tranceformer Yes, the car was running... 01-09-2012, 06:57 PM

tonybui My MPG dropped after exhaust... 01-20-2012, 09:33 AM

semtex Yes, but if you plan on doing... 01-20-2012, 10:11 AM

6MT Mine was way too lean (even... 01-20-2012, 09:49 AM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Stillen header installation	semtex	DIY Section (Do-It-Yourself)	39	01-10-2017 04:29 PM
Running too lean?	G37Sam	Tuning	21	06-01-2010 10:25 AM
Stillen header issue finally fixed	1uk32	Intake/Exhaust	14	10-04-2009 06:37 PM
question about stillen header	chirojin	Nissan 370Z General Discussions	0	07-12-2009 02:38 PM
Muffler shop ? and header questions..	AceSpade77	Intake/Exhaust	3	05-06-2009 11:35 AM