Intake, Header, HFC, CBE = Too Lean?

semtex · 03-25-2010, 04:32 PM

Quote:

Originally Posted by Red370

But this would be a problem, I actively use my cruise control

It doesn't interfere with normal cruise control usage. To switch between maps. you hold down the toggle in the coast/set position, then while keeping the toggle held down, you tap the cancel button the number of times corresponding to the map you want to load. So for instance, I have my anti-theft in slot 3, so I'd tap the cancel button 3 times to load it. The only way I could see this interfering with anything is if you were trying to switch maps while you were actually in motion with the CC on. But you're not supposed to switch maps while in motion anyway.

Zsteve · 03-25-2010, 04:33 PM

Now what I need since I dont have the Nav is a touch screen that I can hook my cobb to and see and do all my stuff right there.

semtex · 03-25-2010, 04:33 PM

Quote:

Originally Posted by Zsteve

I thought you were being a little sacastic in that post.

Does anyone have the Osiris here? And did they get good gains?

How was I being sarcastic? Care to elaborate?

Zsteve · 03-25-2010, 04:34 PM

Quote:

Originally Posted by semtex

How was I being sarcastic? Care to elaborate?

It just kinda read that way I guess. Atleast to me. Not mad, it was kinda funny really. I guess I just read between the words.

Actually it was Dreamers comments I was reading not yours. Oppps.

semtex · 03-25-2010, 04:35 PM

Quote:

Originally Posted by theDreamer

I will be getting it when I get my tune next month (after LTH), will post a review plus some pictures of the software, etc.

Are you gonna dyno tune, Dreamer?

Zsteve · 03-25-2010, 04:39 PM

Quote:

Originally Posted by theDreamer

I will be getting it when I get my tune next month (after LTH), will post a review plus some pictures of the software, etc.

After the ups and downs with uprev, and people getting tuned and some showing good and some showing bad gains, I wonder what if anything have they (meaning all companies) done to get better results?

theDreamer · 03-25-2010, 04:42 PM

I will dyno tune, hoping to go to Austin to meet (again) the Uprev team but a shop in Houston now offers dyno tuning with Uprev so not sure yet.
I have never gotten into tuning and will be glad to have someone do it for me at first, but like many things I do I will learn myself on what to do and such.

semtex · 03-25-2010, 04:44 PM

Quote:

Originally Posted by Zsteve

After the ups and downs with uprev, and people getting tuned and some showing good and some showing bad gains, I wonder what if anything have they (meaning all companies) done to get better results?

Yeah I'm eager to know the answer to that question myself. But I just want to remind you guys the context of this little side-discussion on UpRev vs. Cobb. Vegitto-kun expressed a concern that he was planning to do all these mods that would make him run lean, and that he wouldn't be able to dyno tune to correct it, as he's over in Belgium. So we're just trying to point out to him that he's not screwed. He can go with either Cobb or Uprev, and either one will allow him to send his data back and get an e-tune. Even if that e-tune didn't yield substantial gains, it'd at least address his concern about running lean, as his AFR would presumably get corrected once he uploads his e-tune. That's the only thing that I was trying to convey, anyway.

theDreamer · 03-25-2010, 04:44 PM

Quote:

Originally Posted by Zsteve

After the ups and downs with uprev, and people getting tuned and some showing good and some showing bad gains, I wonder what if anything have they (meaning all companies) done to get better results?

There really are no good or bad results.
The thing you have to look at with any tune is where did they start with.
Some cars come with solid tunes from factory which respond well to aftermarket parts while others will try to fight the change until you tune the car.

Also: I believe no company really has a solid tuning software out yet (meaning they both just unlock AF adjustments and that is about it). VVEL/timing/etc. will be the major game changer.

Zsteve · 03-25-2010, 04:44 PM

Quote:

Originally Posted by theDreamer

I will dyno tune, hoping to go to Austin to meet (again) the Uprev team but a shop in Houston now offers dyno tuning with Uprev so not sure yet.
I have never gotten into tuning and will be glad to have someone do it for me at first, but like many things I do I will learn myself on what to do and such.

think you could do a dyno with just the map, then another after they dyno tune?

4r3s · 03-25-2010, 04:46 PM

wow this thread is awesome, so much good information!

semtex · 03-25-2010, 04:46 PM

Quote:

Originally Posted by Zsteve

think you could do a dyno with just the map, then another after they dyno tune?

You mean with the base reflash prior to adjustments? I think they'll automatically do that. Actually, they have to in order to establish a baseline for the tune.

Zsteve · 03-25-2010, 04:47 PM

Quote:

Originally Posted by semtex

Yeah I'm eager to know the answer to that question myself. But I just want to remind you guys the context of this little side-discussion on UpRev vs. Cobb. Vegitto-kun expressed a concern that he was planning to do all these mods that would make him run lean, and that he wouldn't be able to dyno tune to correct it, as he's over in Belgium. So we're just trying to point out to him that he's not screwed. He can go with either Cobb or Uprev, and either one will allow him to send his data back and get an e-tune. Even if that e-tune didn't yield substantial gains, it'd at least address his concern about running lean, as his AFR would presumably get corrected once he uploads his e-tune. That's the only thing that I was trying to convey, anyway.

True and the canned map that you get without having to send your info back and forth will take care of that too. I get my Cobb today and I will see if I can get some AF reading before and after to see how they changed the AF with just a canned tune.

Zsteve · 03-25-2010, 04:47 PM

Quote:

Originally Posted by semtex

You mean with the base reflash prior to adjustments? I think they'll automatically do that. Actually, they have to in order to establish a baseline for the tune.

Yea a dyno after they load the new map and then one after they tweak it on the dyno. To get an idea how much the dyno tune will get you over a canned map.

Red370 · 03-25-2010, 04:50 PM

yeah i'd like to see that myself

03-25-2010, 04:33 PM	#77 (permalink)
Zsteve A True Z Fanatic Join Date: Sep 2009 Location: TX Posts: 3,298 Drives: the 2 balled club Rep Power: 22	Now what I need since I dont have the Nav is a touch screen that I can hook my cobb to and see and do all my stuff right there. __________________ 2010 LS3 C6 Silver coupe corvette

03-25-2010, 04:42 PM	#82 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	I will dyno tune, hoping to go to Austin to meet (again) the Uprev team but a shop in Houston now offers dyno tuning with Uprev so not sure yet. I have never gotten into tuning and will be glad to have someone do it for me at first, but like many things I do I will learn myself on what to do and such. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

03-25-2010, 04:50 PM	#90 (permalink)
Red370 A True Z Fanatic Join Date: Jul 2009 Location: Kaiserslautern, Germany Posts: 4,391 Drives: your mom to church Rep Power: 296	yeah i'd like to see that myself __________________ 2011 Mustang 5.0 \| 3.55's \| Lethal Performance off road H-Pipe \| Magnaflow Muffler Delete \| JLT CAI/Bama tuned 417whp/ 404 ft/lbs

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Stillen header installation	semtex	DIY Section (Do-It-Yourself)	39	01-10-2017 05:29 PM
Running too lean?	G37Sam	Tuning	21	06-01-2010 11:25 AM
Stillen header issue finally fixed	1uk32	Intake/Exhaust	14	10-04-2009 07:37 PM
question about stillen header	chirojin	Nissan 370Z General Discussions	0	07-12-2009 03:38 PM
Muffler shop ? and header questions..	AceSpade77	Intake/Exhaust	3	05-06-2009 12:35 PM

03-25-2010, 04:46 PM	#86 (permalink)
4r3s A True Z Fanatic Join Date: Dec 2009 Location: MD Posts: 2,077 Drives: Touring 370z Rep Power: 25	wow this thread is awesome, so much good information!