Failed Injen CAI install need help!

radio5boro · 03-21-2010, 03:54 PM

Operations Procedures

1. Confirm that accelerator pedal is fully released, turn ignition switch “ON” (without starting engine) and wait 3 seconds.
2. Repeat the following steps (2a and 2b) procedures quickly five times within 5 seconds.
2a. Fully depress the accelerator pedal (HARD).
2b. Fully release the accelerator pedal.
3. Wait 7 seconds, fully depress the accelerator pedal and keep it for approx. 10 seconds until the CEL starts blinking.
4. Fully release the accelerator pedal (while the CEL is still blinking)
5. Wait about 10 second.
6. Fully depress the accelerator pedal and keep it for more than 10 seconds.
7. Fully release the accelerator pedal (The CEL light will continue to blink).
8. Turn ignition switch to “OFF” position and now you can start the car. The CEL light should be gone.
If the CEL light continues to remain ON, repeat the above steps. Timing is EXTREMELY critical to resetting the ECU

you have to time it perfectly, or it won't work.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
failed HFC install	Zsteve	Intake/Exhaust	42	03-20-2010 09:10 PM
WTB: Injen CAI	Diocletian	Parts for sale (Private Classifieds)	1	03-08-2010 11:51 PM
Failed attempt at new muffler	ddvette9	Intake/Exhaust	32	12-06-2009 05:34 PM
Injen CAI	joeyz10	Intake/Exhaust	6	09-17-2009 10:57 AM
Injen CAI	joeyz10	Intake/Exhaust	29	09-12-2009 02:10 PM

03-21-2010, 03:54 PM	#9 (permalink)
radio5boro Base Member Join Date: Sep 2009 Location: Queens, NY Posts: 158 Drives: 09 MBlue 370z 6MT Rep Power: 16	Operations Procedures 1. Confirm that accelerator pedal is fully released, turn ignition switch “ON” (without starting engine) and wait 3 seconds. 2. Repeat the following steps (2a and 2b) procedures quickly five times within 5 seconds. 2a. Fully depress the accelerator pedal (HARD). 2b. Fully release the accelerator pedal. 3. Wait 7 seconds, fully depress the accelerator pedal and keep it for approx. 10 seconds until the CEL starts blinking. 4. Fully release the accelerator pedal (while the CEL is still blinking) 5. Wait about 10 second. 6. Fully depress the accelerator pedal and keep it for more than 10 seconds. 7. Fully release the accelerator pedal (The CEL light will continue to blink). 8. Turn ignition switch to “OFF” position and now you can start the car. The CEL light should be gone. If the CEL light continues to remain ON, repeat the above steps. Timing is EXTREMELY critical to resetting the ECU you have to time it perfectly, or it won't work.