Off Throttle Grinding

deftoneZ

Hey everyone, I'm have a weird grinding noise when off throttle whenever I'm above say, 3k RPM or higher as the engine is slowing down. It eventually stops when a bit above 2k RPM. Its very noticeable when in manual mode (its an auto)

It doesn't sound like the VQ "hiss" people talk about. The best I can describe it, is similar to maybe a stone on a grinding wheel, kind of a scoring type noise.

I have Z1 high flow cats, HKS Hi Power Exhaust and a tune by Z1. The car started doing this the day the exhaust was put on. I've not been able to identify an exhaust leak and I've checked the pads and rotors for a lodged stone, and nothing.

It doesn't seem to come from the front of the car, its more towards the rear I'd say, at least behind the seats and towards the hatch. If you have the windows down and are driving by some kind of barrier off throttle, its very noticeable and kinda sounds like crap.

Oddly, my 350Z (a DE motor) had a knock off HKS exhaust and test pipes and I remember it doing the same exact thing.

Any ideas on what this may be or how to stop it? I can't seem to find anything on this sound, maybe its an auto only thing?

Averying

I’d start off with getting under the car and making sure all exhaust bolts are torqued properly.

A decent way to check for exhaust leaks is to blow air into the exhaust and then spray soapy water on the flanges to spot for leaks (they’ll show as bubbles)

I’d also check the exhaust isn’t hitting the cross member. It could be tapping it under certain loads


Sent from my iPhone using Tapatalk

__________________
2009 Sport Touring | Platinum Graphite | GTM Stage 1 Supercharger | BC BR Coilovers | Hotchkis Swaybar | Z1 FUCAs | AME TM-02 Wheels | Z1 2-piece Front Rotors | Z1 Clutch & Flywheel | Invidia Gemini Catback | GTM Resonated Test Pipes

abm89

make sure the O2 sensors are tightened correctly.

__________________
Complete Parts List:
https://github.com/abm89/ztouge-build