Replacement Performance Intake Manifold

Rusty · 06-24-2021, 04:04 PM

The way to develop a manifold is with a flow bench. Start with the stock manifold and test it at different valve lifts ,cfm and velocities. Then test and retest the new manifold against what the stock manifold produced. Once you think you got it. Then it's time for the dyno.

Elmo370z · 06-24-2021, 05:53 PM

Quote:

Originally Posted by JLarson

True, but you have to remember that some persons buy these alternate manifolds purely for appearance. In cases like that, this is not a bad decision.

Yeah I know

Spooler · 06-24-2021, 07:53 PM

Quote:

Originally Posted by JLarson

True, but you have to remember that some persons buy these alternate manifolds purely for appearance. In cases like that, this is not a bad decision.

Appearance, they should be buying the CJ Motorsport intake. Sometimes, I wish I would have just sucked it up and payed for all the extra fab work that would be required.

gridlock13 · 06-24-2021, 09:32 PM

I understand the negative thinking. Know this. My fabricator and I are from race country. We have been friends with Dave Buschur for years. Then Tim Switzer who built the goliath GTRs . SHEPARD and Mallet vets. You name it. I trust my fabricator as he has been in this scene for a long time before most of these companies were even around. If it doesn't make power, we try again. That is the point of testing. But we will call one of these friends and tell the we are coming down for test time. We'll keep you posted.

-ZS-Carpenter · 06-25-2021, 04:04 AM

Quote:

Originally Posted by Rusty

The way to develop a manifold is with a flow bench. Start with the stock manifold and test it at different valve lifts ,cfm and velocities. Then test and retest the new manifold against what the stock manifold produced. Once you think you got it. Then it's time for the dyno.

And no one is going to cough up the coin to do that for a car that sold less than 100k units.

It is what it is on this platform. There will not be any ground breaking development done "the right way" because there is no profit in it. At best they will sell 20 parts if it works. FFS SOHO got what? 12 people on his manifold group buy.

There is no point in acting like everything has to be done like Nascar. It's a nissan that didn't sell well, thats it.

Sent from my SM-G965U using Tapatalk

Elmo370z · 06-25-2021, 09:01 AM

Quote:

Originally Posted by -ZS-Carpenter

And no one is going to cough up the coin to do that for a car that sold less than 100k units.

It is what it is on this platform. There will not be any ground breaking development done "the right way" because there is no profit in it. At best they will sell 20 parts if it works. FFS SOHO got what? 12 people on his manifold group buy.

There is no point in acting like everything has to be done like Nascar. It's a nissan that didn't sell well, thats it.

Sent from my SM-G965U using Tapatalk

Well if soho runs 8’s this weekend, it might trigger some of the millionaires to start looking into the platform. Ditch the Vvel, Hr heads stand alone tuning and waaala we are able to rev these motors to 9,500 Rpms big turbos, and use these manifolds with a purpose.

Spooler · 06-25-2021, 09:17 AM

Quote:

Originally Posted by -ZS-Carpenter

And no one is going to cough up the coin to do that for a car that sold less than 100k units.

It is what it is on this platform. There will not be any ground breaking development done "the right way" because there is no profit in it. At best they will sell 20 parts if it works. FFS SOHO got what? 12 people on his manifold group buy.

There is no point in acting like everything has to be done like Nascar. It's a nissan that didn't sell well, thats it.

Sent from my SM-G965U using Tapatalk

They sold ALL 15 that were made. None left. Many folks were left out in the cold and did not get one. Guess there will be a round 2.

JARblue · 06-25-2021, 09:36 AM

Quote:

Originally Posted by gridlock13

If it doesn't make power, we try again. That is the point of testing.

Then why are you taking pre-orders already? Need that money for R&D?

-ZS-Carpenter · 06-25-2021, 09:43 AM

Quote:

Originally Posted by Spooler

They sold ALL 15 that were made. None left. Many folks were left out in the cold and did not get one. Guess there will be a round 2.

I'd hope he does. That is a sweet unit. I'd love to have one. Hope things are calmed down by then and I can jump in

Sent from my SM-G965U using Tapatalk

Whjaxn17 · 06-25-2021, 09:45 AM

Quote:

Originally Posted by -ZS-Carpenter

And no one is going to cough up the coin to do that for a car that sold less than 100k units.

It is what it is on this platform. There will not be any ground breaking development done "the right way" because there is no profit in it. At best they will sell 20 parts if it works. FFS SOHO got what? 12 people on his manifold group buy.

There is no point in acting like everything has to be done like Nascar. It's a nissan that didn't sell well, thats it.

Sent from my SM-G965U using Tapatalk

Imagine asking to get ripped off

Spooler · 06-25-2021, 11:27 AM

Quote:

Originally Posted by Elmo370z

Well if soho runs 8’s this weekend, it might trigger some of the millionaires to start looking into the platform. Ditch the Vvel, Hr heads stand alone tuning and waaala we are able to rev these motors to 9,500 Rpms big turbos, and use these manifolds with a purpose.

Not happening. 3rd Gear broke again. Time for a billet gear sets. It is not going to be cheap either.

-ZS-Carpenter · 06-25-2021, 11:41 AM

Quote:

Originally Posted by Whjaxn17

Imagine asking to get ripped off

that's exactly what I said

With the attitude some people have around here we should just dig a grave for the car and call it a day.

Sent from my SM-G965U using Tapatalk

06-24-2021, 04:04 PM	#16 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,163 Drives: 2011 Nismo GM 6M Rep Power: 2684437	The way to develop a manifold is with a flow bench. Start with the stock manifold and test it at different valve lifts ,cfm and velocities. Then test and retest the new manifold against what the stock manifold produced. Once you think you got it. Then it's time for the dyno. Elmo370z, Spooler and krazynismo like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

06-24-2021, 09:32 PM	#19 (permalink)
gridlock13 Base Member Join Date: Jul 2016 Location: Cleveland OH Posts: 8 Drives: Graphite 370Z Roadst Rep Power: 9	I understand the negative thinking. Know this. My fabricator and I are from race country. We have been friends with Dave Buschur for years. Then Tim Switzer who built the goliath GTRs . SHEPARD and Mallet vets. You name it. I trust my fabricator as he has been in this scene for a long time before most of these companies were even around. If it doesn't make power, we try again. That is the point of testing. But we will call one of these friends and tell the we are coming down for test time. We'll keep you posted. Rusty, redondoaveb and DieselKrampus like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Intake manifold gasket replacement question	projectpanda	Intake/Exhaust	3	10-17-2018 01:19 PM
3" Short Intake + M370 Manifold vs 3" CAI + Z1 Manifold Dyno Comparison	MoncefVQ	Intake/Exhaust	11	02-26-2018 02:21 PM
R2c performance replacement panel filters - vq35hr, vq37vhr dual intake systems	Tunerz_Store	Exhaust/Intake	66	04-03-2017 05:00 PM
*Pre Order* AAM COMPETITION VQ37 PERFORMANCE INTAKE MANIFOLD	vividracing	Drivetrain/Engine	11	01-15-2016 05:02 PM
GTM Exhaust Manifold Replacement..?	COSMO	Forced Induction	10	03-19-2014 02:20 AM