ERZ Performance High Flow Cats, Install and Review Thread

[efuseakay]

Welcome, ERZ! If I get the CEL again I'll let you know! Have you had any other reports of the P2A03?

[efuseakay]

Update: loose driver's side o2 sensor was the cause. I've put enough miles on the car now to say that the issue has been taken care of. Thanks for such a great affordable product, ERZ!

I'll get a video up within the next few weeks after they have broken in.

[370Zsteve]

Originally Posted by Nissangeneration

our CNT true dual catback is coming anyone from the bay area , CA will let us test on their car (free exhaust)

Anyone take this offer?

[ERZperformance]

Originally Posted by 370Zsteve

Anyone take this offer?

Lou at AMP is going to test it for us, thanks for all the interest.

[wiggy]

Originally Posted by TBSS2008

"One issue I ran into is that ERZ used some extenders for the O2 bungs. Well they don't have a large enough bore to fit the O2 sensor!"

I had the same issue and I also had to unscrewed the extended 02 bung and install the 02 senors without it. More then 1200 miles with the ERZ HFC and one night at the Drag Strip still NO CEL!

Guys,

I'm planning on getting ERZ HFC for my 2010 G37 and was wondering if you had a picture of 02 bung that you had to modify? Has ERZ fixed the problem with the 02 bungs? The word is spreading on myg37forum...

Thanks,
Wiggy

[UFreefer]

Originally Posted by wiggy

Guys,

I'm planning on getting ERZ HFC for my 2010 G37 and was wondering if you had a picture of 02 bung that you had to modify? Has ERZ fixed the problem with the 02 bungs? The word is spreading on myg37forum...

Thanks,
Wiggy

I had this same issue with the HFC's I received a couple weeks ago. Pretty silly to put O2 extenders that don't fit our O2 sensors.

[Zsteve]

Originally Posted by UFreefer

I had this same issue with the HFC's I received a couple weeks ago. Pretty silly to put O2 extenders that don't fit our O2 sensors.

yep same issue here but I just took them off and put some steel wool in there and no cels to date.

[wiggy]

So the 02 sensors are not attached and the holes are just plugged?

Thanks,
Wiggy

[Zsteve]

Originally Posted by wiggy

So the 02 sensors are not attached and the holes are just plugged?

Thanks,
Wiggy

I just put some steel wool in the regular O2 sensor bung and didnt use the extenders as they are the wrong size and screwed in the sensors. The wool acts as a filter basically.

[efuseakay]

My extenders fit just fine have them send you new ones.

[Zsteve]

Originally Posted by efuseakay

My extenders fit just fine have them send you new ones.

no need, no cels and I have about 1K+ miles on the HFCs.

[efuseakay]

Originally Posted by Zsteve

no need, no cels and I have about 1K+ miles on the HFCs.

True! If you aren't throwing any CELs without the extenders, you're good to go...

[wiggy]

Nissangeneration, PM sent

[ERZperformance]

I only have one more in stock our next version will have the 02 sensor extender already weld on as one piece instead of two piece.

[djpathfinder]

I just had mine installed this morning. The exhaust note sounds good. A little louder than before. There's a rattle though. Sounds like it's coming from the front near the exhaust manifold. You can hear it when you're outside the car or with the window open. It's not as noticeable when the windows are closed. Did you guys notice this? The OP mentioned hissing and rasp...I don't hear that, but I definitely hear rattling. I talked to the mechanic and he said all the bolts were tight including the ones that go on the support pieces. No rattling before the install. Anyone experience this? Bluestyle also has a thread about ERZ HFCs, so I'm going to ask there as well.