ERZ Performance High Flow Cats, Install and Review Thread

spearfish25 · 02-07-2010, 10:48 PM

Well, remember that I'm the only person on the forum that actually has these installed (I think). Blue will have them on in a week or so. Given that tons of people have the Berks and a less than a handful have the ERZs, I'm not surprised that no ERZs have thrown a CEL. I've had mine on about 300-400mi without a CEL. Knock on wood.

bluestyle55 · 02-08-2010, 04:45 PM

I believe there is another guy on here that has them installed and I recall reading that he has not thrown any CEL messages.

They will also sell an additional L shaped piece of hardware even if you did so there are no worries to be had.

TBSS2008 · 02-09-2010, 02:51 PM

I have about 250miles now on the ERZ HFC and no CEL light!

And I don't have the extended L anti-foulers installed so seems pretty promising.

spearfish25 · 02-09-2010, 07:51 PM

Quote:

Originally Posted by TBSS2008

I have about 250miles now on the ERZ HFC and no CEL light!

And I don't have the extended L anti-foulers installed so seems pretty promising.

Looks like I'm the guinea pig leader with about 600mi on them

puckshaw · 02-09-2010, 09:24 PM

Thanks for the review spearfish

I pulled the trigger on these today. I'll post up some before and after videos as well with the stock cat back.

bluestyle55 · 02-09-2010, 11:16 PM

ehhhhh...stupid snow is holding me up. Its killing me seeing my ERZ's sitting in the box.

Maybe I should get some canned air in the mean time and see how it sounds going through em.....??

ERZperformance · 02-10-2010, 05:37 AM

we have another member just purchase one today, he gonna post sound clips with Stock exhaust.

ERZperformance · 02-10-2010, 05:46 AM

Quote:

Originally Posted by puckshaw

Thanks for the review spearfish

I pulled the trigger on these today. I'll post up some before and after videos as well with the stock cat back.

Did I spoke with you today,

puckshaw · 02-10-2010, 08:32 AM

Quote:

Originally Posted by ERZpower

Did I spoke with you today,

Yup that was me

Really looking forward to these

puckshaw · 02-16-2010, 11:43 AM

Mine just arrived

I was looking them over and noticed the entry and exit have a bit of a lip from the inner tubing. Yours look the same in your photo, spearfish. Think it's worth grinding it down a bit to make it a smooth entry and exit? Also the flanges on the entry have a little curve to them but I think they'll be fine once tightened down along with the gaskets. I'll post up some pics in a bit.

P.S. Not trying to take over your thread, spearfish. ERZ said they wanted to try and keep all the info in as few threads as possible

Zsteve · 02-16-2010, 11:58 AM

Quote:

Originally Posted by puckshaw

Mine just arrived

I was looking them over and noticed the entry and exit have a bit of a lip from the inner tubing. Yours look the same in your photo, spearfish. Think it's worth grinding it down a bit to make it a smooth entry and exit? Also the flanges on the entry have a little curve to them but I think they'll be fine once tightened down along with the gaskets. I'll post up some pics in a bit.

P.S. Not trying to take over your thread, spearfish. ERZ said they wanted to try and keep all the info in as few threads as possible

let me know how they do on the install, I ordered some too and they should get here soon. looking forward to some extra power as I lost a good bit coming to TX from GA in altitude and going from 93 oct to 91 oct.

puckshaw · 02-16-2010, 12:04 PM

Pics:

puckshaw · 02-16-2010, 12:06 PM

Quote:

Originally Posted by Zsteve

let me know how they do on the install, I ordered some too and they should get here soon. looking forward to some extra power as I lost a good bit coming to TX from GA in altitude and going from 93 oct to 91 oct.

I'm going to attempt the install this Friday night hopefully. I'll post before and after vids and dB readings.

Zsteve · 02-16-2010, 12:15 PM

is that the connection for the o2 sensors in the pic? Looks short.

Hmm dont know if I like the looks of how things arent lining up or being straight. Let us know how they do, I might have to send them back if I dont like they way they are lining up inside.

ERZ is that normal for the insides to be not flush with the walls and all? And the slight up bend on the bolt-on part?

puckshaw · 02-16-2010, 12:52 PM

Quote:

Originally Posted by Zsteve

is that the connection for the o2 sensors in the pic? Looks short.

No those are the bungs for a wideband. The O2 bungs are much longer.

02-07-2010, 10:48 PM	#31 (permalink)
spearfish25 A True Z Fanatic Join Date: Mar 2009 Location: Naples, FL Posts: 4,117 Drives: to work Rep Power: 1856	Well, remember that I'm the only person on the forum that actually has these installed (I think). Blue will have them on in a week or so. Given that tons of people have the Berks and a less than a handful have the ERZs, I'm not surprised that no ERZs have thrown a CEL. I've had mine on about 300-400mi without a CEL. Knock on wood. __________________ 2013 Cadillac V-Wagon, RIP Z

02-08-2010, 04:45 PM	#32 (permalink)
bluestyle55 Premium Member Join Date: Apr 2009 Location: Pa Posts: 194 Drives: 09 Nissan 370z B 6M Rep Power: 16	I believe there is another guy on here that has them installed and I recall reading that he has not thrown any CEL messages. They will also sell an additional L shaped piece of hardware even if you did so there are no worries to be had. __________________ 2009 370z 6MT Touring w/ Sport Pkg \| Invidia Gemini CBE\| Stillen G3 CAI \| ERZ HFC's \|X-Pel Clear Bra \| 20% Tint

02-09-2010, 02:51 PM	#33 (permalink)
TBSS2008 Base Member Join Date: Apr 2009 Location: Texas Posts: 195 Drives: 11 Corvette GS 6spd Rep Power: 16	I have about 250miles now on the ERZ HFC and no CEL light! And I don't have the extended L anti-foulers installed so seems pretty promising. __________________ 2011 Black Corvette Grand Sport 6spd \| NNP Daul Mode Exhaust 2008 Trail Blazer SS Black \| SuperChips Tune 2009 370Z Black 7AT Touring Sport (TRADED)

02-09-2010, 11:16 PM	#36 (permalink)
bluestyle55 Premium Member Join Date: Apr 2009 Location: Pa Posts: 194 Drives: 09 Nissan 370z B 6M Rep Power: 16	ehhhhh...stupid snow is holding me up. Its killing me seeing my ERZ's sitting in the box. Maybe I should get some canned air in the mean time and see how it sounds going through em.....?? __________________ 2009 370z 6MT Touring w/ Sport Pkg \| Invidia Gemini CBE\| Stillen G3 CAI \| ERZ HFC's \|X-Pel Clear Bra \| 20% Tint

02-10-2010, 05:37 AM	#37 (permalink)
ERZperformance A True Z Fanatic Join Date: May 2009 Location: Hayward Posts: 3,015 Drives: Nissan GTR Rep Power: 22	we have another member just purchase one today, he gonna post sound clips with Stock exhaust. __________________ http://www.cntracing.com http://www.ERZperformance.com 800-363-8599

02-09-2010, 09:24 PM	#35 (permalink)
puckshaw Track Member Join Date: Nov 2009 Location: Charlotte, NC Posts: 620 Drives: 09 PW 370Z Touring Rep Power: 17	Thanks for the review spearfish I pulled the trigger on these today. I'll post up some before and after videos as well with the stock cat back.

02-16-2010, 11:43 AM	#40 (permalink)
puckshaw Track Member Join Date: Nov 2009 Location: Charlotte, NC Posts: 620 Drives: 09 PW 370Z Touring Rep Power: 17	Mine just arrived I was looking them over and noticed the entry and exit have a bit of a lip from the inner tubing. Yours look the same in your photo, spearfish. Think it's worth grinding it down a bit to make it a smooth entry and exit? Also the flanges on the entry have a little curve to them but I think they'll be fine once tightened down along with the gaskets. I'll post up some pics in a bit. P.S. Not trying to take over your thread, spearfish. ERZ said they wanted to try and keep all the info in as few threads as possible

02-16-2010, 12:04 PM	#42 (permalink)
puckshaw Track Member Join Date: Nov 2009 Location: Charlotte, NC Posts: 620 Drives: 09 PW 370Z Touring Rep Power: 17	Pics:

02-16-2010, 12:15 PM	#44 (permalink)
Zsteve A True Z Fanatic Join Date: Sep 2009 Location: TX Posts: 3,298 Drives: the 2 balled club Rep Power: 22	is that the connection for the o2 sensors in the pic? Looks short. Hmm dont know if I like the looks of how things arent lining up or being straight. Let us know how they do, I might have to send them back if I dont like they way they are lining up inside. ERZ is that normal for the insides to be not flush with the walls and all? And the slight up bend on the bolt-on part? __________________ 2010 LS3 C6 Silver coupe corvette Last edited by Zsteve; 02-16-2010 at 12:18 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ERZ Performance High Flow Cats	spearfish25	Intake/Exhaust	24	05-10-2011 05:59 PM
High Flow Cats	Savage08	Intake/Exhaust	37	10-08-2009 09:03 AM
High Flow Cats and Y-Pipe	DNadar	Intake/Exhaust	0	06-11-2009 05:44 PM