2014 up Z with CEL on MD ART pipes

Bswanny · 06-13-2019, 10:42 AM

Curious if anyone would know if switching from MD ART (causing a CEL) to Berk High Flow cats would still cause a CEL as I know the 2014 and up models have more sensitive O2 readings. Any help?

Sent from my SAMSUNG-SM-G930A using Tapatalk

Nooree01 · 06-13-2019, 11:40 AM

I am pretty sure a cel is still possible with hfc.
I think it's a hit or miss situation

Corsairprime · 06-13-2019, 01:01 PM

I run the Berk HFCs on my '14 Nismo. No CEL, made sure the exhaust to manifold seal was not leaking. Try the Permatex® High-Temp Red RTV Silicone Gasket Maker if you are thinking about going this route. I also swapped the secondary O2 sensors for new ones about 18 months ago. One of them was going out, or getting lazy about registering values to the ECU.

Best of luck.

Bswanny · 06-13-2019, 01:29 PM

Quote:

Originally Posted by Corsairprime

I run the Berk HFCs on my '14 Nismo. No CEL, made sure the exhaust to manifold seal was not leaking. Try the Permatex® High-Temp Red RTV Silicone Gasket Maker if you are thinking about going this route. I also swapped the secondary O2 sensors for new ones about 18 months ago. One of them was going out, or getting lazy about registering values to the ECU.

Best of luck.

How many miles did your Z have when the sensors went? Only jabe about 35k miles so maybe a wrong assumption, but I think my 02 sensors should still be good?

Bswanny · 06-13-2019, 01:31 PM

Quote:

Originally Posted by Nooree01

I am pretty sure a cel is still possible with hfc.
I think it's a hit or miss situation

That's what I'm worried about. Also curious is something like fabspeed catted O2 anti foulers would work

https://www.fabspeed.com/universal-o...verter-single/

Nooree01 · 06-13-2019, 01:32 PM

What other mods do you have?

Sent from my SM-G975U using Tapatalk

Bswanny · 06-13-2019, 01:45 PM

Quote:

Originally Posted by Nooree01

What other mods do you have?

Sent from my SM-G975U using Tapatalk

Stillen Gen 3 Cai, Motordyne CB exhaust, Ecutek tune

ZontheRocks · 06-13-2019, 03:00 PM

The Ecutek tuner should have the capability through the software to workout the CEL.

Main reason why I have put off my ART pipe install. Saving for the tune so I don't have to have the ECU creating a CEL for AFR.

Bswanny · 06-13-2019, 05:19 PM

Quote:

Originally Posted by ZontheRocks

The Ecutek tuner should have the capability through the software to workout the CEL.

Main reason why I have put off my ART pipe install. Saving for the tune so I don't have to have the ECU creating a CEL for AFR.

Completely false. I was under the same assumption but was told by Seb at specialty Z that a tune cannot help pass emissions. It can turn the sensors off so you don't get a CEL, but the emissions testing center will see that and fail it. Ask me how I know...

dts3 · 06-13-2019, 06:08 PM

I don't think he was saying you can fake emissions... Just that you can turn off the light/DTC

Bswanny · 06-13-2019, 09:06 PM

Quote:

Originally Posted by dts3

I don't think he was saying you can fake emissions... Just that you can turn off the light/DTC

Did you just say something about my momma?

ZontheRocks · 06-14-2019, 06:39 AM

Quote:

Originally Posted by dts3

I don't think he was saying you can fake emissions... Just that you can turn off the light/DTC

Ks_Z34 · 06-14-2019, 07:57 AM

So I just installed my ART pipes last weekend, I only got a CEL on the one side, that’s making me think that it’s either leaking that side or less likely the sensor. So this weekend I’m going to see if I can find a leak (it would only be between the manifold and the front of the ART pipe). Also I might switch the sensors to see if the CEL goes to the other side, I’m doubting that is the issue because I was very careful when unplugging them but it’s an easy check.

Sent from my iPhone using Tapatalk

Bswanny · 06-14-2019, 09:57 AM

Quote:

Originally Posted by Ks_Z34

So I just installed my ART pipes last weekend, I only got a CEL on the one side, that’s making me think that it’s either leaking that side or less likely the sensor. So this weekend I’m going to see if I can find a leak (it would only be between the manifold and the front of the ART pipe). Also I might switch the sensors to see if the CEL goes to the other side, I’m doubting that is the issue because I was very careful when unplugging them but it’s an easy check.

Sent from my iPhone using Tapatalk

What year Z is yours?

Sent from my SAMSUNG-SM-G930A using Tapatalk

Ks_Z34 · 06-14-2019, 10:08 AM

Quote:

Originally Posted by Bswanny

What year Z is yours?

Sent from my SAMSUNG-SM-G930A using Tapatalk

Sorry just realized your post is for 2014 and up but mine is a 2013. Although I don’t think it would really matter. I did look up the DTC through a database from work, and the “Possible Issues” are O2 sensors, wiring, connectors, exhaust leak or PCM. Betting that it is a leak or possibly part of the sensor(s).

Sent from my iPhone using Tapatalk

06-13-2019, 01:01 PM	#3 (permalink)
Corsairprime Base Member Join Date: May 2014 Location: Frisco, TX Posts: 215 Drives: 14 370Z Nismo GM 6MT Rep Power: 3545	I run the Berk HFCs on my '14 Nismo. No CEL, made sure the exhaust to manifold seal was not leaking. Try the Permatex® High-Temp Red RTV Silicone Gasket Maker if you are thinking about going this route. I also swapped the secondary O2 sensors for new ones about 18 months ago. One of them was going out, or getting lazy about registering values to the ECU. Best of luck. __________________ Corsairprime 2014 Nismo #462, GunMetal Grey, GT-R Start Button, AAM S-Line/R-Line intake and S-Line exhaust, Berk HFCs, Osiris Tuned at JoTech

06-13-2019, 03:00 PM	#8 (permalink)
ZontheRocks Track Member Join Date: Mar 2017 Location: Central Florida Posts: 959 Drives: 2016 Nissan PW 370Z Rep Power: 34535	The Ecutek tuner should have the capability through the software to workout the CEL. Main reason why I have put off my ART pipe install. Saving for the tune so I don't have to have the ECU creating a CEL for AFR. ColtronZ likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
370z Midpipes/Down Pipes/Y-Pipes/Test Pipes and HFC!! Best Prices in town!	JM Auto Racing	Exhaust/Intake	472	11-28-2022 01:57 PM
[WTB] Resonated Test Pipes for 2014 370Z	Alexbo	Parts for sale (Private Classifieds)	0	05-08-2017 01:24 PM
Tour d'Orange 2014 - January 1, 2014	zero	Southern California Region	3	12-27-2013 02:34 PM
2014 Chevrolet Camaro LS7, Twin-Turbo V-6 Revealed In 2014 GM Document	96bigbody	Other Vehicles	2	12-21-2012 08:47 PM

06-13-2019, 11:40 AM	#2 (permalink)
Nooree01 Base Member Join Date: Sep 2018 Location: Kansas City, MO Posts: 108 Drives: 2011 370z Gray 7AT Rep Power: 7	I am pretty sure a cel is still possible with hfc. I think it's a hit or miss situation

06-13-2019, 01:32 PM	#6 (permalink)
Nooree01 Base Member Join Date: Sep 2018 Location: Kansas City, MO Posts: 108 Drives: 2011 370z Gray 7AT Rep Power: 7	What other mods do you have? Sent from my SM-G975U using Tapatalk

06-13-2019, 06:08 PM	#10 (permalink)
dts3 Track Member Join Date: May 2018 Location: Farmington Hills, MI Posts: 599 Drives: 08 Expedition Rep Power: 6765	I don't think he was saying you can fake emissions... Just that you can turn off the light/DTC

06-14-2019, 07:57 AM	#13 (permalink)
Ks_Z34 Base Member Join Date: Apr 2019 Location: Windsor Ontario Posts: 12 Drives: 13 Nissan 370Z MT6 Rep Power: 6	So I just installed my ART pipes last weekend, I only got a CEL on the one side, that’s making me think that it’s either leaking that side or less likely the sensor. So this weekend I’m going to see if I can find a leak (it would only be between the manifold and the front of the ART pipe). Also I might switch the sensors to see if the CEL goes to the other side, I’m doubting that is the issue because I was very careful when unplugging them but it’s an easy check. Sent from my iPhone using Tapatalk