Custom 3D Printed GTR Style Intake Plenum Project

cupcakez · 02-28-2018, 10:09 PM

Quote:

Originally Posted by Rusty

Won't work the Stillen or TopgunZ supercharger kits. As these kits replace the upper manifold to begin with. The Stillen kit has a water cooled heat exchanger in the manifold. The TopgunZ kit uses the same manifold without the heat exchanger in it.

Damn. Maybe I should buy that when I replace my vortech v3 SCi blower / A2A kit in the faaaar future with a V7-YSi blower then. Since the v7 is already proven to fit in our cars

cupcakez · 03-02-2018, 01:48 PM

i will buy this for the future. few years down when i upgrade my blower from v3 SCi to a v7 YSi. that way i can swap out the stillen manifold with this one, and run the v7 YSi.

let us know when you are taking orders

I will purchase one and keep it sitting in my room until im ready to upgrade

Cpt. Obvious · 03-02-2018, 02:58 PM

Quote:

Originally Posted by cupcakez

i will buy this for the future. few years down when i upgrade my blower from v3 SCi to a v7 YSi. that way i can swap out the stillen manifold with this one, and run the v7 YSi.

let us know when you are taking orders

I will purchase one and keep it sitting in my room until im ready to upgrade

I definitely will. Should have the first version printed within the next week or two and then do some testing and tuning to get it all dialed in.

cupcakez · 03-03-2018, 09:07 AM

Any idea or guesses on how this would fare against the AAM Competition Intake Manifold?
https://www.z1motorsports.com/air-in...hr-p-9139.html

Elmo370z · 03-04-2018, 12:15 AM

Another manifold thread. Waiting for results from testing. Maybe this could be far superior to the stock waffle with gains all across the board? How are you going to compare the prototype vs the waffle? tuned waffle vs tuned prototype?

Cpt. Obvious · 05-05-2018, 04:23 PM

Sorry for the long delay but I finally got the first version printed and test fitted.

Going back over it now to make a few modifications and add all of the bolt and vacuum connections.
Plan on having a final working version in the next 2-3 weeks.
Once it has been thoroughly tested then I will be offering a limited number of them for sale.
Price will be around $1,000 each. Some other colors and finishes including carbon will be available in the future.
Since it's a 3 piece design, the plenums will be interchangeable with new finishes as they become available.

These will go quick so if you're interested in getting one then please message me so I know how many I need to have ready. Initial production will be 5-10

(sorry the pics are upside down. damn iphones)

husam2012 · 05-05-2018, 04:35 PM

Very interesting. Have you drive the car with it yet and do you feel that there are any gains?

Sent from my iPhone using Tapatalk

Cpt. Obvious · 05-05-2018, 04:44 PM

Quote:

Originally Posted by husam2012

Very interesting. Have you drive the car with it yet and do you feel that there are any gains?

Sent from my iPhone using Tapatalk

This one I wasn’t able to drive with but looking forward to a driving version and the dyno results

Sent from my iPhone using Tapatalk

Elmo370z · 05-09-2018, 01:12 AM

subbed

Kojack · 05-19-2018, 05:56 AM

*sub'ed*

Jayhovah · 05-19-2018, 07:22 AM

looks awesome.. organic like the heart of a monster.

JLFX · 05-27-2018, 10:51 AM

I'm interested in dyno results as well . was looking into getting a Z1 modded intake but if this flows as good or better I would be willing

Elmo370z · 05-27-2018, 10:12 PM

Kinda reminds me of the one 1slpw370z had on his car when he converted GTm ITB manifold to twin 70mm TB’s

Volk Z · 05-31-2018, 09:35 PM

Sub'd

FPenvy · 06-01-2018, 07:42 AM

finally a decently priced and good looking manifold............and now i have a GT-R so no more spending on Z parts lol

03-04-2018, 12:15 AM	#5 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,724 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Another manifold thread. Waiting for results from testing. Maybe this could be far superior to the stock waffle with gains all across the board? How are you going to compare the prototype vs the waffle? tuned waffle vs tuned prototype? JARblue and Rusty like this. Last edited by Elmo370z; 03-04-2018 at 12:21 AM.

05-05-2018, 04:35 PM	#7 (permalink)
husam2012 Track Member Join Date: Mar 2015 Location: Michigan Posts: 551 Drives: 370Z Nismo Rep Power: 9470	Very interesting. Have you drive the car with it yet and do you feel that there are any gains? Sent from my iPhone using Tapatalk __________________ Creator of the GTR TT Conversion Kit, NA Record Holder (401WHP) Ecutek Master Tuner (VQ37, VR30, VR38, B58, S55, S58) BTWTuning

05-27-2018, 10:51 AM	#12 (permalink)
JLFX Base Member Join Date: May 2017 Location: Jackson tn Posts: 2 Drives: 2015 370z Rep Power: 8	I'm interested in dyno results as well . was looking into getting a Z1 modded intake but if this flows as good or better I would be willing __________________ 15 370z manual, sport Touring. Top speed exhaust (strait pipes)

05-31-2018, 09:35 PM	#14 (permalink)
Volk Z A True Z Fanatic Join Date: Aug 2011 Location: Laguna Beach, CA Posts: 2,214 Drives: Nismo Z Rep Power: 3066	Sub'd __________________ AMUSE * TOMEI * STILLEN * CRAFTSQUARE RECARO * 3M * TOP SECRET * SLICKCARBON

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] Z1 Upper Intake Plenum	RustyM2001	Parts for sale (Private Classifieds)	2	03-26-2017 12:10 AM
M370 to z1 intake plenum	Eighties Meta	Tuning	3	01-01-2017 11:01 AM
intake plenum vs intake manifold?	louiey370z	Engine & Drivetrain	5	01-07-2016 09:49 AM
WTB Lower intake plenum	photoguy1	Wanted	0	09-07-2015 05:11 PM
Custom manifold/plenum/TBs	ViCiouS	Intake/Exhaust	40	11-25-2014 02:04 PM

03-02-2018, 01:48 PM	#2 (permalink)
cupcakez Track Member Join Date: Oct 2017 Location: California Posts: 635 Drives: 2009-7AT-Base-Coup Rep Power: 4836	i will buy this for the future. few years down when i upgrade my blower from v3 SCi to a v7 YSi. that way i can swap out the stillen manifold with this one, and run the v7 YSi. let us know when you are taking orders I will purchase one and keep it sitting in my room until im ready to upgrade

03-03-2018, 09:07 AM	#4 (permalink)
cupcakez Track Member Join Date: Oct 2017 Location: California Posts: 635 Drives: 2009-7AT-Base-Coup Rep Power: 4836	Any idea or guesses on how this would fare against the AAM Competition Intake Manifold? https://www.z1motorsports.com/air-in...hr-p-9139.html

05-09-2018, 01:12 AM	#9 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,724 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	subbed

05-19-2018, 05:56 AM	#10 (permalink)
Kojack Base Member Join Date: Oct 2012 Location: USA Posts: 144 Drives: G37s Rep Power: 13	sub'ed

05-27-2018, 10:12 PM	#13 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,724 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Kinda reminds me of the one 1slpw370z had on his car when he converted GTm ITB manifold to twin 70mm TB’s