Fast Intentions Long Tube Headers are here!

Elmo370z · 12-11-2015, 01:17 AM

The drivers side. How da f word do you get to some of these bolts and apply torque to them. I dont even want to talk about that heat shield lol. Cant wait to finish up the install.

Rusty · 12-11-2015, 09:07 AM

I used a pair of tin snipes and cut up the heat shield to get it out. I removed the drivers front tire and when through the gap between the frame and fender liner to get to some of the nuts. Others I used my calibrated torque meter in my elbow.

No leaks after about 3yrs.

Spooler · 12-11-2015, 10:40 PM

Think about getting up there to drill out a broken stud. I would replace them.

Elmo370z · 12-12-2015, 12:22 AM

Quote:

Originally Posted by Spooler

Think about getting up there to drill out a broken stud. I would replace them.

Everything has come out just fine beside one heat shield bolt. Just drivers side is very little wiggle room

Rusty · 12-12-2015, 12:31 AM

I removed the exhaust manifold and cats as one piece. This way, I didn't have to mess with the demon bolts.

Elmo370z · 12-13-2015, 11:30 PM

How to unclip this.on the drivers side.

Rusty · 12-13-2015, 11:57 PM

I slipped a small screw driver into the plug right where you have the arrow.

Elmo370z · 12-14-2015, 12:36 AM

Quote:

Originally Posted by Rusty

I slipped a small screw driver into the plug right where you have the arrow.

Yup that's what i did. Good sakes, i don't know how you guy that did the install all by yourself did it. I had someone slip a flathead down to press the clip and it came out. Then the heat shield. Install the long tubes Wednesday. Pictures will follow. Thanks for your help rusty.

Rusty · 12-14-2015, 12:40 AM

Glad to help.

The only problem I had was the fricken heat shield. Trying to take it out once I had it unbolted.

Elmo370z · 12-14-2015, 12:45 AM

I dont even want to talk about it. I just left it in there. I saud faq it. Then pulling out the headers was a pain. But i got after a few curse words, and banging around.

Elmo370z · 12-22-2015, 09:50 PM

Almost ready to fire up

Rusty · 12-22-2015, 09:55 PM

One thing you might want to do. Relocate the plugs for the O2 sensors that are mounted on the tranny. I've broken both of them hitting road kill.

Got them taped and zipped tied together.

Elmo370z · 12-23-2015, 01:41 AM

Quote:

Originally Posted by Rusty

One thing you might want to do. Relocate the plugs for the O2 sensors that are mounted on the tranny. I've broken both of them hitting road kill.

Got them taped and zipped tied together.

You have a picture?

Spooler · 12-23-2015, 12:17 PM

Quote:

Originally Posted by Rusty

One thing you might want to do. Relocate the plugs for the O2 sensors that are mounted on the tranny. I've broken both of them hitting road kill.

Got them taped and zipped tied together.

Your supposed to dodge the roadkill. Don't straddle it, bad things happen.

Rusty · 12-23-2015, 04:58 PM

Quote:

Originally Posted by Spooler

Your supposed to dodge the roadkill. Don't straddle it, bad things happen.

Sometimes you don't have a choice on a back road.

12-11-2015, 09:07 AM	#2057 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,187 Drives: 2011 Nismo GM 6M Rep Power: 2684437	I used a pair of tin snipes and cut up the heat shield to get it out. I removed the drivers front tire and when through the gap between the frame and fender liner to get to some of the nuts. Others I used my calibrated torque meter in my elbow. No leaks after about 3yrs. Elmo370z likes this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

12-12-2015, 12:31 AM	#2060 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,187 Drives: 2011 Nismo GM 6M Rep Power: 2684437	I removed the exhaust manifold and cats as one piece. This way, I didn't have to mess with the demon bolts. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

12-13-2015, 11:57 PM	#2062 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,187 Drives: 2011 Nismo GM 6M Rep Power: 2684437	I slipped a small screw driver into the plug right where you have the arrow. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

12-14-2015, 12:40 AM	#2064 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,187 Drives: 2011 Nismo GM 6M Rep Power: 2684437	Glad to help. The only problem I had was the fricken heat shield. Trying to take it out once I had it unbolted. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

12-22-2015, 09:55 PM	#2067 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,187 Drives: 2011 Nismo GM 6M Rep Power: 2684437	One thing you might want to do. Relocate the plugs for the O2 sensors that are mounted on the tranny. I've broken both of them hitting road kill. Got them taped and zipped tied together. swiss370Z likes this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

12-11-2015, 10:40 PM	#2058 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,801 Drives: 2013 Nismo 370z Rep Power: 2684392	Think about getting up there to drill out a broken stud. I would replace them.

12-14-2015, 12:45 AM	#2065 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	I dont even want to talk about it. I just left it in there. I saud faq it. Then pulling out the headers was a pain. But i got after a few curse words, and banging around.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stillen Gen III Ultra Long Tube Intakes Nissan 370Z FREE SHIPPING : IntensePOWER!	INTENSEPOWER	Exhaust/Intake	206	08-27-2010 03:41 PM
FS: Fast Intentions HFC's - Like New	Sonic370Z	Parts for sale (Private Classifieds)	8	10-01-2009 11:59 AM
New You Tube Video of Fast Intentions CBE 18" Resonators in CF	Aus370z	Australia/New Zealand	1	09-04-2009 12:57 AM
Stillen CBE vs Fast Intentions CBE?????	john370z	Intake/Exhaust	10	08-02-2009 10:12 PM
STILLEN G3 Ultra Long Tube Intake	nogoodname	Intake/Exhaust	117	03-18-2009 12:25 AM