Fast Intentions Long Tube Headers are here!

F.I. Inc. · 02-24-2010, 09:59 PM

Quote:

Originally Posted by docaam

ok if these will fit G37coupe will these fit the 2007+ G35 sedan as well?

I have not test fit them on the Sedan yet. I am confident that they will fit though.

docaam · 02-25-2010, 04:05 AM

Quote:

Originally Posted by F.I. Inc.

I have not test fit them on the Sedan yet. I am confident that they will fit though.

can do a test fit on it as well once recieved...so another benchmark for you

F.I. Inc. · 02-25-2010, 10:16 AM

Quote:

Originally Posted by docaam

can do a test fit on it as well once recieved...so another benchmark for you

I am assuming that you want a set for your Sedan as well! Let's get you set up with the cat back as well.

mattkim85 · 02-25-2010, 04:19 PM

by the sound of the vids, they dont sound raspy...hmm..

maybe i'm so used to it being raspy with my hfcs.

can someone quote me on this?

docaam · 02-26-2010, 01:21 AM

Quote:

Originally Posted by F.I. Inc.

I am assuming that you want a set for your Sedan as well! Let's get you set up with the cat back as well.

what i was thinking if it gets too loud on Z i might test fit on the sedan...wont add cat back but a Y pipe will do

will keep you posted

F.I. Inc. · 02-26-2010, 01:42 PM

UPDATE-

I just received conformation that the tooling has shipped from Italy and will be state side sometime towards the end of next week. The distribution center will inspect the tooling to make sure that it is correct and then send it out to me (Hopefully) next Thursday or Friday. If that is the case, I should have the tooling within 2 weeks from today.

From there we need about 2-4 days to play with it and get all of the bends and rotations down. Once we have everything indexed, we will begin production.

The first set of fixtures/jigs will be completed by the end of today and I hope to have the second set of fixtures/jigs completed by the middle of next week. The reason we have decided to build 2 sets is to (Hopefully) speed production up! Obviously I have not built a production set yet. So, I can only try and calculate how long it will take to build each set. I am (hoping) that 2 people can produce 3-4 sets a day. We will not be working on them every single day due to the fact that we only have 4 people including (me) and we are almost two months behind just on cat back builds. I would like to have 5-8 sets mailed out every week if possible.

We at Fast Intentions, Inc. appreciate everyones continued patience...

Thank you, Tony

vipor · 02-26-2010, 01:44 PM

Sweet, that means once I get some extra money I won't be too far out getting my set

G37Sam · 02-26-2010, 05:13 PM

Thanks for the update Tony!

theDreamer · 02-26-2010, 05:15 PM

dainedazz · 02-26-2010, 06:14 PM

Quote:

Originally Posted by F.I. Inc.

UPDATE-

I just received conformation that the tooling has shipped from Italy and will be state side sometime towards the end of next week. The distribution center will inspect the tooling to make sure that it is correct and then send it out to me (Hopefully) next Thursday or Friday. If that is the case, I should have the tooling within 2 weeks from today.

From there we need about 2-4 days to play with it and get all of the bends and rotations down. Once we have everything indexed, we will begin production.

The first set of fixtures/jigs will be completed by the end of today and I hope to have the second set of fixtures/jigs completed by the middle of next week. The reason we have decided to build 2 sets is to (Hopefully) speed production up! Obviously I have not built a production set yet. So, I can only try and calculate how long it will take to build each set. I am (hoping) that 2 people can produce 3-4 sets a day. We will not be working on them every single day due to the fact that we only have 4 people including (me) and we are almost two months behind just on cat back builds. I would like to have 5-8 sets mailed out every week if possible.

We at Fast Intentions, Inc. appreciate everyones continued patience...

Thank you, Tony

nixxer · 02-26-2010, 06:49 PM

Patiently waiting. Tony, would you pm me an estimate on my shipping costs? Thanks

docaam · 02-27-2010, 04:37 AM

thanks for the update....i guess we should be looking beginning of April for our dubai ones...np

1slow370 · 02-27-2010, 04:58 AM

You need more welders/fabricators

E.Johnson · 02-27-2010, 07:05 AM

Quote:

Originally Posted by F.I. Inc.

UPDATE-

I just received conformation that the tooling has shipped from Italy and will be state side sometime towards the end of next week. The distribution center will inspect the tooling to make sure that it is correct and then send it out to me (Hopefully) next Thursday or Friday. If that is the case, I should have the tooling within 2 weeks from today.

From there we need about 2-4 days to play with it and get all of the bends and rotations down. Once we have everything indexed, we will begin production.

The first set of fixtures/jigs will be completed by the end of today and I hope to have the second set of fixtures/jigs completed by the middle of next week. The reason we have decided to build 2 sets is to (Hopefully) speed production up! Obviously I have not built a production set yet. So, I can only try and calculate how long it will take to build each set. I am (hoping) that 2 people can produce 3-4 sets a day. We will not be working on them every single day due to the fact that we only have 4 people including (me) and we are almost two months behind just on cat back builds. I would like to have 5-8 sets mailed out every week if possible.

We at Fast Intentions, Inc. appreciate everyones continued patience...

Thank you, Tony

There is a saying here in sweden:

If you are waiting for something good/nice, you will never wait too long..

The wait is no problem for me anyway, as long as I get them before my trip to Nürburgring =)

theDreamer · 02-27-2010, 11:27 AM

Quote:

Originally Posted by E.Johnson

There is a saying here in sweden:

If you are waiting for something good/nice, you will never wait too long..

The wait is no problem for me anyway, as long as I get them before my trip to Nürburgring =)

You better have a few cameras mounted to your car for us to enjoy.

02-25-2010, 04:19 PM	#814 (permalink)
mattkim85 Base Member Join Date: Dec 2008 Location: los angeles, ca Age: 39 Posts: 230 Drives: 09 Z34, 08 AP2 Rep Power: 17	by the sound of the vids, they dont sound raspy...hmm.. maybe i'm so used to it being raspy with my hfcs. can someone quote me on this? __________________ Fast Intentions CBE 18" , Berk HFCs, Injen CAI, KW V3, Rear SPC Camber Kit, VOLK RE30's

02-26-2010, 01:42 PM	#816 (permalink)
F.I. Inc. The370Z.com Sponsor Join Date: Feb 2009 Location: Simi Valley, CA Posts: 2,989 Drives: 2010 GT-R/2007 F-250 Rep Power: 685	*UPDATE-* I just received conformation that the tooling has shipped from Italy and will be state side sometime towards the end of next week. The distribution center will inspect the tooling to make sure that it is correct and then send it out to me (Hopefully) next Thursday or Friday. If that is the case, I should have the tooling within 2 weeks from today. From there we need about 2-4 days to play with it and get all of the bends and rotations down. Once we have everything indexed, we will begin production. The first set of fixtures/jigs will be completed by the end of today and I hope to have the second set of fixtures/jigs completed by the middle of next week. The reason we have decided to build 2 sets is to (Hopefully) speed production up! Obviously I have not built a production set yet. So, I can only try and calculate how long it will take to build each set. I am (hoping) that 2 people can produce 3-4 sets a day. We will not be working on them every single day due to the fact that we only have 4 people including (me) and we are almost two months behind just on cat back builds. I would like to have 5-8 sets mailed out every week if possible. We at Fast Intentions, Inc. appreciate everyones continued patience... Thank you, Tony DRFTR likes this. __________________ *Follow us on Facebook: Fast Intentions Inc.* Phone: (805) 522-FAST (3278) Email: tony@fastintentions.com www.fastintentions.com "FUELED BY PASSION"

02-26-2010, 01:44 PM	#817 (permalink)
vipor A True Z Fanatic Join Date: Aug 2009 Location: Euless, TX [ DFW ] Age: 42 Posts: 13,531 Drives: Nismo 09-0183 QAB Rep Power: 49	Sweet, that means once I get some extra money I won't be too far out getting my set __________________ 2009 NISMO # 0193 \| QAB \| Albums! \| 05.04.10 (Dynojet) 291.94hp/248.28tq Oil Cooler (DIY) \| Custom Headlights \| GTSPEC Braces \| F.I. Long Tube Headers

02-26-2010, 05:13 PM	#818 (permalink)
G37Sam A True Z Fanatic Join Date: Dec 2008 Location: Dubai, UAE Posts: 1,507 Drives: RB'd G37 Rep Power: 21	Thanks for the update Tony! __________________ '14 Viper GTS '08 RB'd G37S - Sold

02-26-2010, 05:15 PM	#819 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	__________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

02-26-2010, 06:49 PM	#821 (permalink)
nixxer Base Member Join Date: Jul 2009 Location: Hawaii Posts: 163 Drives: Black 370z 6MT Sp/T Rep Power: 16	Patiently waiting. Tony, would you pm me an estimate on my shipping costs? Thanks __________________ FI TDX 12" \| FI LTH \| Injen CAI \| UpRev \| Tuned by AMS www.project-definition.com

02-27-2010, 04:37 AM	#822 (permalink)
docaam A True Z Fanatic Join Date: Nov 2009 Location: Dubai Posts: 2,532 Drives: Z34/240z/Hakosuka Rep Power: 29	thanks for the update....i guess we should be looking beginning of April for our dubai ones...np __________________ Old 370Z SOLD but not forgotten 370Z 40th, G37s, S30 RBZ, Hakosuka Skyline

02-27-2010, 04:58 AM	#823 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	You need more welders/fabricators __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stillen Gen III Ultra Long Tube Intakes Nissan 370Z FREE SHIPPING : IntensePOWER!	INTENSEPOWER	Exhaust/Intake	206	08-27-2010 03:41 PM
FS: Fast Intentions HFC's - Like New	Sonic370Z	Parts for sale (Private Classifieds)	8	10-01-2009 11:59 AM
New You Tube Video of Fast Intentions CBE 18" Resonators in CF	Aus370z	Australia/New Zealand	1	09-04-2009 12:57 AM
Stillen CBE vs Fast Intentions CBE?????	john370z	Intake/Exhaust	10	08-02-2009 10:12 PM
STILLEN G3 Ultra Long Tube Intake	nogoodname	Intake/Exhaust	117	03-18-2009 12:25 AM