Fast Intentions Long Tube Headers are here!

G37Sam · 12-22-2009, 06:12 PM

It's all good mate, ask Tony how long I been nagging on him to make some headers for us

I'm sure you're going back to Forged after the install to get a retune right? looking forward to seeing your numbers

semtex · 12-22-2009, 06:27 PM

Quote:

Originally Posted by G37Sam

It's all good mate, ask Tony how long I been nagging on him to make some headers for us

I'm sure you're going back to Forged after the install to get a retune right? looking forward to seeing your numbers

Maybe. I need to consult with Sharif on whether or not it'll be necessary. Dirty little secret for you -- Uprev's software for the 370Z isn't capable of advancing timing yet. Like you make the adjustments in the software, but they don't go anywhere. My understanding is that Uprev is still working on cracking that piece. Until they do, it seems like a waste of money to re-tune. Might as well wait for them to crack it, then do the re-tune. The only thing that's really adjustable right now is AFR, and I'm not sure how much my AFR will change just from going to LTHs when I already have the Stillen headers + Berk HFCs, ya know? But that's what I need to consult with Sharif on.

G37Sam · 12-22-2009, 06:53 PM

Thanks for letting me in that secret haha.. I'm guessing waiting would be your best bet then.. It's more of a matter of wanting a tune rather than needing one. I know for a fact the LT Headers will flow much better than the HFC + Short Tubes combo

Just moving from HFC to straight pipes actually with a tune would yield some nice numbers.. so imagine that doing headers!

I'm with you on waiting till they fix the timing though

theDreamer · 12-22-2009, 08:09 PM

That is why I am doing all my performance bolt ons currently, hoping by summer 2010 Uprev will have finished 100% of their tuning software and I can enjoy it.

motoextreme · 12-22-2009, 09:39 PM

Tony, if your only a man short to wrapping up this deal then count me in. If I go the Turbo route I'll just sell them for cheap like everything else

Just keep me in mind if you need one more to jump in. You know how to get hold of me.

As always, thanks bro! Keep up the great work!

DannyGT · 12-23-2009, 02:21 PM

What to see some video's, then I'm most likely IN!

SilverBullet · 12-23-2009, 02:26 PM

Sam, removing any cat will yield better numbers because there is less restriction.

F.I. Inc. · 12-23-2009, 02:57 PM

LeonZ5 #007, thank you for the order...

Tony

F.I. Inc. · 12-23-2009, 03:09 PM

Quote:

Originally Posted by DavidL

Tony , I have the FI cbe with 18'' res and carbon and really like the looks quality and sound (except the 2000-2300 drone) and am interested in the headers ,
1) How do you get the manifold sensors to reach ?
2) What is the reason for long tubes before going into one ?
3) I really am interest to know if the sound is louder , and if the design is better or worse in the drone department ?
I now have stillen headers and berk cats , and am looking for everything I can get out of the NA motor . The things I am looking for are power , light weight , quality , and sound .
I look for your response and want to thank you again for a great cbe system and great service , I have had several say they were getting one from you after seeing and riding in my car.

David,

1) You will have to extend your front O2 sensors. I will supply detailed instructions with the headers that everyone will need to adhere to! I will also supply all of the wire pre cut to the specific length along with heat shrink tubing. Eventually, we plan to make plug and play adapters but getting the plugs are not easy.

2) I am assuming that you are referring to the collector at the bottom! That is what gives you all of your torque. If you were to just dump the four tube into a piece of 2.5" tubing the header would not perform correctly. You would create alot of turbulence at the merging point of the four tubes. The reason we chose to make a long tube, is due to the fact that we feel there is not much improvement to be had with a shorty header over the stock manifold. Nissan did a very good job designing the stock exhaust manifolds and it looks very close to the design of a header in itself.

3) The sound has become louder outside of the car and quieter inside the car. Reason being, the tone is not as deep and Bass. Do not get me wrong, it still sounds great. Just slightly higher pitched and even more exotic.

Given what your overall goals are, we can help you achieve them. You along with Semtex have Stillen shorty headers and Berk HFC's. He has dyno charts that prove once the Stillen headers went on, he lost torque and picked up very little power in an un usable RPM range. Meaning he only picked up power at THE VERY TOP end. I am pleased that you are happy with our cat back and anything you need in the future, please do not hesitate to ask...

Thank you, Tony

F.I. Inc. · 12-23-2009, 03:10 PM

Quote:

Originally Posted by DannyGT

What to see some video's, then I'm most likely IN!

Trying to get someting going sometime this week.

semtex · 12-23-2009, 03:13 PM

My Stillen shorty headers will make good doorstops. Or maybe I'll weld them onto my riding mower. I've been wanting to rice that thing out for a while now. Just for amusement.

vipor · 12-23-2009, 05:06 PM

Quote:

Originally Posted by semtex

My Stillen shorty headers will make good doorstops. Or maybe I'll weld them onto my riding mower. I've been wanting to rice that thing out for a while now. Just for amusement.

..that's right! JLP is BACK!

dainedazz · 12-23-2009, 06:03 PM

cant wait for the vids..

MrBMW · 12-23-2009, 06:08 PM

Quote:

Originally Posted by F.I. Inc.

3) The sound has become louder outside of the car and quieter inside the car. Reason being, the tone is not as deep and Bass. Do not get me wrong, it still sounds great. Just slightly higher pitched and even more exotic.

Thank you, Tony

This is awesome news Tony. It's probably the thing i like most about the RTP's is when you get into it, is that exotic sound it makes

. If what your saying is that it would become quiter "In Cabin" then that's a bonus in my mind. A bit louder outside is ok for me for where i live and work.

If you can just let me know where i need to take photo's for you as to whether you can work with our cars would be great.

G37Sam · 12-23-2009, 06:53 PM

Quote:

Originally Posted by F.I. Inc.

3) The sound has become louder outside of the car and quieter inside the car. Reason being, the tone is not as deep and Bass. Do not get me wrong, it still sounds great. Just slightly higher pitched and even more exotic.

Am I the only one that read that as:

Quote:

He sticked his penis into her vagina and slid back and forth. Her boobs were right by his mouth and he licked them perfectly. She screamed and moaned and yelled "FASTER! HARDER! I WANT MOREEEEE!!".

Just saying, it sounded pornographic hahaha

12-22-2009, 06:12 PM	#241 (permalink)
G37Sam A True Z Fanatic Join Date: Dec 2008 Location: Dubai, UAE Posts: 1,507 Drives: RB'd G37 Rep Power: 21	It's all good mate, ask Tony how long I been nagging on him to make some headers for us I'm sure you're going back to Forged after the install to get a retune right? looking forward to seeing your numbers __________________ '14 Viper GTS '08 RB'd G37S - Sold

12-22-2009, 06:53 PM	#243 (permalink)
G37Sam A True Z Fanatic Join Date: Dec 2008 Location: Dubai, UAE Posts: 1,507 Drives: RB'd G37 Rep Power: 21	Thanks for letting me in that secret haha.. I'm guessing waiting would be your best bet then.. It's more of a matter of wanting a tune rather than needing one. I know for a fact the LT Headers will flow much better than the HFC + Short Tubes combo Just moving from HFC to straight pipes actually with a tune would yield some nice numbers.. so imagine that doing headers! I'm with you on waiting till they fix the timing though __________________ '14 Viper GTS '08 RB'd G37S - Sold

12-22-2009, 08:09 PM	#244 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	That is why I am doing all my performance bolt ons currently, hoping by summer 2010 Uprev will have finished 100% of their tuning software and I can enjoy it. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

12-22-2009, 09:39 PM	#245 (permalink)
motoextreme Track Member Join Date: Nov 2009 Location: Chino Hills, CA Posts: 971 Drives: Nismo NO MODS! Rep Power: 369	Tony, if your only a man short to wrapping up this deal then count me in. If I go the Turbo route I'll just sell them for cheap like everything else Just keep me in mind if you need one more to jump in. You know how to get hold of me. As always, thanks bro! Keep up the great work! __________________ Fast Intensions / NST / Mishimoto / Alpine / JDM / Volk / Brembo / Rotora / Seibon / Stillen / Password: JDM / KW / MR Works / RAW / Sun Auto / B&M / Amplified Motorsports

12-23-2009, 02:21 PM	#246 (permalink)
DannyGT Track Member Join Date: Jan 2009 Location: Jersey Posts: 919 Drives: 370Z (SOLD) Rep Power: 279	What to see some video's, then I'm most likely IN! __________________ Performance GTM Stage 1 SC, GTM Res.Test Pipes, Invidia Gemini Exhaust, GTM HD Oil Cooler Wheels & Suspension AME Tracer TM02's 19x9.5F 19x10.5R w/ 265x35F & 305x30R, Hotchkis Sways, BC (BR) Racing Coilovers (Car Sold)

12-23-2009, 02:26 PM	#247 (permalink)
SilverBullet Track Member Join Date: Dec 2009 Location: California Posts: 873 Drives: 2008 G37 Rep Power: 17	Sam, removing any cat will yield better numbers because there is less restriction.

12-23-2009, 02:57 PM	#248 (permalink)
F.I. Inc. The370Z.com Sponsor Join Date: Feb 2009 Location: Simi Valley, CA Posts: 2,989 Drives: 2010 GT-R/2007 F-250 Rep Power: 685	*LeonZ5 #007, thank you for the order...* Tony __________________ *Follow us on Facebook: Fast Intentions Inc.* Phone: (805) 522-FAST (3278) Email: tony@fastintentions.com www.fastintentions.com "FUELED BY PASSION"

12-23-2009, 03:13 PM	#251 (permalink)
semtex A True Z Fanatic Join Date: Jan 2009 Location: Behind enemy lines Age: 54 Posts: 5,995 Drives: People to drink Rep Power: 32	My Stillen shorty headers will make good doorstops. Or maybe I'll weld them onto my riding mower. I've been wanting to rice that thing out for a while now. Just for amusement. __________________ "There are no small accidents on this circuit." -- Ayrton Senna 316.8whp & 248 ft/lbs (Dyno Dynamics) \| 319whp & 256 ft/lbs (DynoJet) (04/23/10) Stillen G3 CAI, CBE, Pulley / F.I. LTH / GTSpec Ladder Brace / Setrab Oil Cooler / UpRev-tuned by Forged Perf.

12-23-2009, 06:03 PM	#253 (permalink)
dainedazz A True Z Fanatic Join Date: Jan 2009 Location: NY, NJ, Philippines Posts: 1,325 Drives: 09' SR 6MT Z34 Rep Power: 293	cant wait for the vids.. __________________ DaineZ' Rosalena \| Kenwood \| Pioneer \| 3M \| 180 Custom \| Stillen \| Z1 \| Fast Intentions \| Setrab \| Eibach \| Varis \| UpRev \| TEIN \| UAM \| Amuse \| Bride \| Southbend \| WORK \| TWM \| BFGoodrich \| Robispec \| TAKATA \| GTSPEC \| *Instagram* @johndainez

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stillen Gen III Ultra Long Tube Intakes Nissan 370Z FREE SHIPPING : IntensePOWER!	INTENSEPOWER	Exhaust/Intake	206	08-27-2010 03:41 PM
FS: Fast Intentions HFC's - Like New	Sonic370Z	Parts for sale (Private Classifieds)	8	10-01-2009 11:59 AM
New You Tube Video of Fast Intentions CBE 18" Resonators in CF	Aus370z	Australia/New Zealand	1	09-04-2009 12:57 AM
Stillen CBE vs Fast Intentions CBE?????	john370z	Intake/Exhaust	10	08-02-2009 10:12 PM
STILLEN G3 Ultra Long Tube Intake	nogoodname	Intake/Exhaust	117	03-18-2009 12:25 AM