Nissan 370Z Forum - Fast Intentions Long Tube Headers are here!

Nissan 370Z Forum (http://www.the370z.com/)

- Intake/Exhaust (http://www.the370z.com/intake-exhaust/)

- - Fast Intentions Long Tube Headers are here! (http://www.the370z.com/intake-exhaust/12436-fast-intentions-long-tube-headers-here.html)

Quote:

Originally Posted by quicksilver08 (Post 1247548)

Since I'm not going to read through a 120pgs of stuff, has anyone installed these with a set of high flow cats behind them? And has anyone dynoed their car with a supercharger and these headers other than Shumby at the very beginning?

If you would care to read through the 120 pages, you'd find that you can't put HFC's with these as they take up the space of both your stock header and cat.

Secondly, yes others have dyno'd these with an S/C. Notable theDreamer has them, and a GTM Stage 1 SC. They will not work with the Stage 2 SC as the compressor is too big.

I run them with the GTM stage I SC, 400whp & ~340TQ

I never said the HFC's would be a bolt up deal did I? It's just stainless piping. It cuts and welds just like any other pipe out there. Only reason I ask is these things sound like they add a considerable amount of noise since they are uncatted and I don't want a bunch of noise inside my car.

Quote:

Originally Posted by quicksilver08 (Post 1247601)

If you want the interior noise kept to a minimum than these might not be for you.

If you have any questions regarding any of my products, please do not hesitate to call me diorectly...

Thank you, Tony

I'm just kinda curious as to why we can get long tubes and catted pipes on f-body's and vette's but on these we can't. I think the hfc's would take out a loan of interior noise but still allow them to work to their full potential. But that's just my $.02. Carry on folks.

Quote:

Originally Posted by quicksilver08 (Post 1247548)

Since I'm not going to read through a 120pgs of stuff, has anyone installed these with a set of high flow cats behind them? And has anyone dynoed their car with a supercharger and these headers other than Shumby at the very beginning?

Quote:

Originally Posted by quicksilver08 (Post 1247601)

1. Kinda looks like you did... :ugh2:

They don't add any more noise than say if you went with Test Pipes, just a different type of sound, but the volume isn't any different. Actually, believe it or not, the LTH setup is actually Quieter than an HFC setup.

UPDATE-

Tommy G: 064, Chad L. (Non forum member): 065, Makram C. (Non forum member): 066

Thank you ALL for your recent orders!

HNGonzalez: 001 (Installed)
Semtex: 002 (Installed)
Daishi: 003 (Installed)
Mr. Anonymous: 004 (Installed)
Kolya: 005 (Installed)
The Dreamer: 006 (Installed)
LeonZ5: 007 (Installed)
Earwicker7: 008 (Installed)
Zello370: 009 (Installed)
Matrix_Square: 010 (Installed)
Dainedazz: 011 (Installed)
Cotizi: 012 (Installed)
Jason S. (Non forum member): 013 (Installed)
NYBladez: 014 (Installed)
Valentino: 015 (Installed)
res0zsfa: 016 (Installed)
Danny3.7: 017 (Installed)
Tardcore: 018 (Installed)
Booger: 019 (Installed)
PG6speed: 020 (Installed)
Jnaut: 021 (Installed)
Shultea1: 022 (Installed)
VH370ZNISMO: 023 (Installed)
Vipor: 024 (Installed)
E.Johnson: 025 (Installed)
Jamaica951: 026 (Canceled)
Bejan: 027 (Installed)
roplusbee: 028 (On hold, waiting for customer)
Vegitto-Kun: 029 (Installed)
jgb0311: 030 (Installed)
xwchriswx: 031 (Installed)
WesEngines: 032 (Delivered)
VA370Z: 033 (Installed)
Rooskey: 034 (Delivered)
Hassan A. (Non forum member): 035 (Delivered)
Fleece82: 036 (Installed)
AndrewKD16: 037 (Installed)
Pato C. (Non forum member): (Installed)
Rickey89: 039 (Delivered)
Reaper42: 040 (Delivered)
FL 4motion/Juno: 041 (Delivered)
One_Quick_Z: 042 (Delivered)
Ivo S. (Non forum member): 043 (Installed)
NewYorkJon34: 044 (Installed)
Jespir1: 045 (Delivered)
leighspped: 046 (Delivered)
AndrewC_31: 047 (Installed)
KPyburn: 048 (Delivered)
Ryanboy: 049 (Delivered)
Nismodean: 050 (Delivered)
NissanBoy: 051 (Delivered)
Blblack: 052 (Delivered)
Cambinese: 053 (Delivered)
german77: 054 (Delivered)
Peppers: 055 (Delivered)
Nism0370: 056 (Delivered)
PCB370Z: 057 (Delivered)
David T. (Non forum member): 058 (Delivered)
Elitle Auto Service: 059 (Delivered)
MTAxelson: 060 (Building)
V8Killer: 061 (Building)
My_third_Z: 062
Elite Auto Service: 063
Tommy G: 064
Chad L. (Non forum member): 065
Makram C. (Non forum member): 066

Mine have been installed since this spring and I have been loving every second of it :)

Just FYI

DAN

Please..check my PM..

Best exhaust mod I have on here thus far. Doesn't throw a check engine light and I recently passed inspection in New York, of course they didn't look under. I have the distinction of being the loudest car in NY short of those running open dumps.

Tony your list is out of date, mine has been installed for quite some time, it's listed as "Blblack" on your list :)

Quote:

Originally Posted by NYBladeZ (Post 1311841)

Who runs open header? That would get old real quick!

bumping this thread.

Just saw another thread where someone was asking about putting in the FI LTH with the Motordyne XYZ pipe that comes with a cat.

Was wondering if anyone has done this. How much of the gains from the LTH would be diminished by adding a cat to the system?

Quote:

Originally Posted by NYBladeZ (Post 1311841)

Video please? :D