Nissan 370Z Forum
Page 108 of 144 « First 85898106107 108 109110118 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Intake/Exhaust (http://www.the370z.com/intake-exhaust/)
-   -   Fast Intentions Long Tube Headers are here! (http://www.the370z.com/intake-exhaust/12436-fast-intentions-long-tube-headers-here.html)

F.I. Inc. 02-01-2011 10:49 AM
Quote:
Originally Posted by Rooskey (Post 920962)
These headers are a great product. My power band from 5 to 75 is drastically different. I recommend these to everyone. My only problem I had was removing my air/fuel sensors from my factory manifolds. I dont know if they are heat welded or if it is a pull em out and your screwed type of deal with the factory warranty (lots of problems if you search with headers or going with a turbo set up). Anyway be very carefull getting these out. Get some PB Blaster and soak the hell out of them. After a half turn if it gets any tensions then stop and soak again. It will save you about $700 bucks!!!
I feel your pain brother! I soak them and then work them back and forth about a quarter turn at a time. Sometimes they come out very easily. Other times I have to be patient with them. In the end though I have never had to replace a set to date!

On a brighter note, I am glad you are enjoying the headers. Do not hesitate to call me if you need anything...

Thanks, Tony

F.I. Inc. 02-01-2011 11:52 AM
UPDATE-

Rickey89: 039, Reaper42: 040, FL 4motion/Juno: 041...

Thank you ALL for your recent orders!

HNGonzalez: 001 (Installed)
Semtex: 002 (Installed)
Daishi: 003 (Installed)
Mr. Anonymous: 004 (Installed)
Kolya: 005 (Installed)
The Dreamer: 006 (Installed)
LeonZ5: 007 (Installed)
Earwicker7: 008 (Installed)
Zello370: 009 (Installed)
Matrix_Square: 010 (Installed)
Dainedazz: 011 (Installed)
Cotizi: 012 (Installed)
Jason S. (Non forum member): 013 (Installed)
NYBladez: 014 (Installed)
Valentino: 015 (Installed)
res0zsfa: 016 (Installed)
Danny3.7: 017 (Installed)
Tardcore: 018 (Installed)
Booger: 019 (Installed)
PG6speed: 020 (Installed)
Jnaut: 021 (Installed)
Shultea1: 022 (Installed)
VH370ZNISMO: 023 (Installed)
Vipor: 024 (Installed)
E.Johnson: 025 (Installed)
Jamaica951: 026 (Canceled)
Bejan: 027 (Installed)
roplusbee: 028 (On hold, waiting for customer)
Vegitto-Kun: 029 (Installed)
jgb0311: 030 (Installed)
xwchriswx: 031 (Installed)
WesEngines: 032 (Delivered)
VA370Z: 033 (Delivered)
Rooskey: 034 (Delivered)
Hassan A. (Non forum member): 035 (Delivered)
Fleece82: 036 (Delivered)
AndrewKD16: 037 (In transit today)
Pato C. (Non forum member): 038 (In transit next week)
Rickey89: 039
Reaper42: 040
FL 4motion/Juno: 041

XwChriswX 02-01-2011 01:12 PM
Almost caught up to the end! Are you planning on stopping production at 50 or so, I know how much you love making them lol

F.I. Inc. 02-01-2011 02:49 PM
Quote:
Originally Posted by XwChriswX (Post 921584)
Almost caught up to the end! Are you planning on stopping production at 50 or so, I know how much you love making them lol
Hahaha.

They are not that bad to build. Just very time consuming. Alot of steps in the build process.

I hope to never have to stop the production process!!!

XwChriswX 02-01-2011 03:01 PM
Just out of curiosity... Is there a reason F.I. decided to not use the Hemholz resonators or have blued tips... ??

F.I. Inc. 02-02-2011 11:24 AM
Quote:
Originally Posted by XwChriswX (Post 921847)
Just out of curiosity... Is there a reason F.I. decided to not use the Hemholz resonators or have blued tips... ??
You know the answer to that Chris. You have been in my shop and we have talked in person.

crash1369 02-02-2011 06:18 PM
Quote:
Originally Posted by F.I. Inc. (Post 922973)
You know the answer to that Chris. You have been in my shop and we have talked in person.
So does that mean it's a secret?

F.I. Inc. 02-03-2011 03:31 PM
Quote:
Originally Posted by crash1369 (Post 923682)
So does that mean it's a secret?
It is no secret at all. He just knows the answer!

XwChriswX 02-03-2011 03:32 PM
Quote:
Originally Posted by F.I. Inc. (Post 925302)
It is no secret at all. He just knows the answer!
That was months ago! :facepalm: I can't remember everything... :rofl2:

Rooskey 02-06-2011 11:11 PM
Has anyone experienced any excess noise since installing the headers. Seems to me that there is alot more noise coming from the engine compartment. Thinking I should install new header gaskets but just wanted to get an opinion. Yes the car is louder without cats but the noise I am trying to explain seems to be like an exhaust leak or somewhat. The factory gaskets were reused and were not damaged during the installation. I followed the instructions during install as well. (Torque bolts from center to out).

XwChriswX 02-06-2011 11:15 PM
Quote:
Originally Posted by Rooskey (Post 929561)
Has anyone experienced any excess noise since installing the headers. Seems to me that there is alot more noise coming from the engine compartment. Thinking I should install new header gaskets but just wanted to get an opinion. Yes the car is louder without cats but the noise I am trying to explain seems to be like an exhaust leak or somewhat. The factory gaskets were reused and were not damaged during the installation. I followed the instructions during install as well. (Torque bolts from center to out).
I haven't noticed any excess noise? When are you hearing this noise? At starting, idle, acceleration, cruising, or deceleration?

Vegitto-kun 02-07-2011 07:27 AM
Quote:
Originally Posted by Rooskey (Post 929561)
Has anyone experienced any excess noise since installing the headers. Seems to me that there is alot more noise coming from the engine compartment. Thinking I should install new header gaskets but just wanted to get an opinion. Yes the car is louder without cats but the noise I am trying to explain seems to be like an exhaust leak or somewhat. The factory gaskets were reused and were not damaged during the installation. I followed the instructions during install as well. (Torque bolts from center to out).
oh yeah I know what you mean kinda does sound like a exhaust leak. though I checked it out and there werent any leaks

semtex 02-07-2011 07:57 AM
Quote:
Originally Posted by Rooskey (Post 929561)
Has anyone experienced any excess noise since installing the headers. Seems to me that there is alot more noise coming from the engine compartment. Thinking I should install new header gaskets but just wanted to get an opinion. Yes the car is louder without cats but the noise I am trying to explain seems to be like an exhaust leak or somewhat. The factory gaskets were reused and were not damaged during the installation. I followed the instructions during install as well. (Torque bolts from center to out).
You're not talking about the famous hiss, are you? Because that's normal.

Vegitto-kun 02-07-2011 10:15 AM
Quote:
Originally Posted by semtex (Post 929759)
You're not talking about the famous hiss, are you? Because that's normal.
nah the hiss is mostly when you let go of the throttle this is a noise that kinda sounds like water or something like that, its hard to describe it.

Rooskey 02-07-2011 01:11 PM
I only hear the noise at idle when im standing outside of the car. I can hear it from about ten foot away also. Kinda like a loud exhaust leak. The headers have only been on for about 100 miles so I will most likely retorque the bolts this week just to be sure.


All times are GMT -5. The time now is 03:35 PM.
Page 108 of 144 « First 85898106107 108 109110118 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2