best intake bang 4 money without taking off front ebd

pinky

I do not want to take of the front end.
so no stillen....
that said. what's left inn?
what else?

Spooler

Stay factory with K&N drop in filters. Do the hoses from the Map to the intake. Your done.

SS_Firehawk

Post maf tubes and K&N drop ins... been around since 2009. Tested within a crew hp of a CAI. Just take some time to research. This is a very common mod.

__________________

gomer_110

As previously mentioned, if your not willing to remove the front fascia (which is really easy by the way) then just go with the MAF tubes and good high flow filters (K&N or similar).

__________________
'11 370Z Nismo #528 Fast Intentions | Stillen | Motordyne | Uprev | CSF | Zspeed | Z1 Motorsports | AST | Swift | SPC | SPL | Whiteline | Hotchkis | Bride | Schroth | Robispec | Cusco | Nismo | Volk | Forgestar | Hoosier | RJM
'17 Titan Bone Stock

SouthArk370Z

You don't want to pull air from the hot engine compartment. If you don't want to pull the front cover to install a third-party CAI, the recommendations above (free-flowing filters and pipes) are your best bet. You might want to look into insulating the piping, filter box, etc.

I haven't pulled a 370Z front cover but, going by what I've read on this site and others, it's not a difficult job. Buy a handful of the rivets used to mount the cover - most people break at least one during the job. The FSM (link in my sig) has the procedure for R&Ring the cover (with drawings and other helpful info) and there are several DIYs on this site.

__________________
Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub
Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

tdman77

I've been researching this for a couple of weeks now and this is what I am doing to my car. Already go the K&N filters just waiting to get the post MAF tubes from CZP. (Best price I have found so far.)

__________________
USCG Veteran, 2014 370Z Touring, Sport, Nav, Stillen G3 intakes, Berk HFC, Invidia Gemini CBE, Hella Supertones

Jayhovah

Good plan.

As others have echoed.. taking off the front bumper is super easy.After doing it the first time I can get it done in about 5 minutes now.

__________________
2013 Gun Metallic Sport - Gamma V3 Twin Turbogized
DIY Gamma V3 TT Install * Jayhovah's Gamma V3 TT Install Pic'Z and Vid'Z * DIY: Washer Reservoir for the Boosted

Rusty

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

pinky

that should have the tubes and the filters and all I need right?
better price out there than on amazon?
https://www.amazon.com/gp/product/B0...worldtransl-20

Rusty

This is what you need. Only $216.00

https://www.z1motorsports.com/z1-pro...es-p-5292.html

https://www.z1motorsports.com/air-in...er-p-3305.html

What you posted will suck in hot air from the engine compartment. The stock set-up gets fresh air from behind the bumper.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

socce

I have everything you need just sitting on my table. Was gonna go this route but decided to go for a CAI in the end. PM'd you.

pinky

and if I want to do better then the stillen gen 3.

What's the price of the gen3 ?
Is it really worth it compare to drop in knn and silicones ?

socce

It might be worth your while if you are planning to have your car tuned at some point.

Like 500 new or find used for 400, cheaper if your lucky. Someone correct me if I'm wrong though.

Some would say yes, others no. If your looking for the best bang 4 your money you should probably go with the MAF tubes, as the stock air intake on the Z is well designed and functional, or so that is what I have read here.

Not the easiest of choices perhaps do what your funds and budget will allow you too.

Rusty

Here's the Stillen G3's.

https://www.z1motorsports.com/air-in...it-p-3847.html

You can pick up a set used a lot cheaper if you are willing to wait. Someone always have a set for sell.

The other side of this is. What are your plans for the Z. What other mods you want to do?

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

littlejuanito

Ahhh that rabbit hole is so tempting but with no way out

__________________
Fast Intentions Non-Resonated Carbon Fiber CBE | Berk Non-Resonated HFC | Powertrix Coilovers | RJM Clutch Pedal | LatheWerks Shift Knob | Stillen Sway Bars, |SPL Parts | Enkei RS05RR | Fujimura Diffuser | Ecutek Tuned by Seb | 308whp