How to remove Stillen Gen 2 air filter for cleaning?

SteveK

One of the previous owners of my 2014 Coupe installed a Stillen Gen 2 air intake kit. I'm trying to pull the filters out to see if they need cleaning, but it's proving difficult to get a socket on the pipe clamp that holds the filter to the stainless steel tube. The urethane intake box that surrounds the filter is blocking my access to the pipe clamp, but even if I manage to loosen the clamp, there is no room to pull the filter away from the pipe because the radiator is in the way. Do I need to pull both the filter and stainless pipes out as a unit the same way it was installed?

Also, how often do these typically need cleaning? My car has 25K miles on it and probably hasn't been driven thru many sand storms.

Lastly, is there an easy way to identify if the filter is dry or oiled? If I rub the filter pleats, will I feel oil on my fingers?

Thanks!

20170610_150835.jpg

crazy4oldcars

The red tint suggests k&n filters. Those are good for 50k, unless, as you say, you regularly drive thru dust storms.
As for removal, sorry, no clue.

Kirk B.

Rusty

Looks like you will have to undo everything to get the filters out. Use the K&N cleaning kit on them. To dry them after washing. Use a shop vac to suck the water out. Then sit in the sun to dry. You don't want to use air pressure to dry them. You take a chance on ripping the element. When you reoil. Spray a LIGHT even coat of oil on the outside. DON'T over do it. Too much oil will find it's way down the intake tract. Coating everything. MAF sensors will take the hardest hit. Other then that. They are great.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html