Another insufferable maf code post

Originally Posted by Ommateal

Had codes done by a very nice scanner, It looks like since I changed the Mafs those have not shown back up, the Major codes I got this time were Lean Bank codes 1 and 2

P0171 Lean Bank 1 - This was stored when I ran the codes
P0174 Lean Bank 2 - This showed up after a clear -

Then my car died After letting it get hot for a while, We took a break, I went to leave, and it sputtered and stalled until sufficient time passed it cooled and was able to start.

We are possibly leaning twords a fuel issue now that maf codes are gone.

Failing pump?

Just to be thorough and for knowledge in the post, Here is a full list of codes that first pulled some may be redundant and coincidence from messing with stuff, most are my steering lock (pulled fuse) I think.

B2014 - Chain of Steering lock BCM
B2562 - Low Voltage
B2607 - Lock Relay
B2609 - Lock Status
B260A - Ignition Relay
B26E8 - Clutch Interlock Switch
B2109 - Lock relay off

Engine stuff

P0300 - random multiple Misfires
P0171 - Too lean Bank 1
Po174 - Too lean Bank 2

Thats all I got this time around.

Originally Posted by Ommateal

No too sure about that battery exactly but I have used two different batteries so far since the issue has happened , they show consistent voltage. And no change of symptoms improving between either battery.

And Which relearn do you speak of exactly? Idle relearn?
Ala: 2003-2011 Nissan 350Z - 370Z Idle Air Volume Learning Procedure | Nissanhelp.com

Also lslightly off topic, but SouthArk or anyone, do you know What shape fuel Strainer we have? Is it the Moon/Half circle shape? Or square bag shape?