Berk Exhaust Production with X-Pipe

MightyBobo · 03-27-2010, 03:44 PM

Quote:

Originally Posted by theDreamer

So what you are saying is...you are being lazy.

No, what Im saying is, is $4200 in repairs has drained my funds lol.

theDreamer · 03-27-2010, 03:45 PM

Quote:

Originally Posted by MightyBobo

No, what Im saying is, is $4200 in repairs has drained my funds lol.

Oooooohhhhh.

ChrisSlicks · 03-31-2010, 06:40 PM

Installed mine yesterday, car sounds so much sweeter between 1K and 4K, it was like music to my ears!

Box was well packaged, all bolts and pieces were there.

Bolted up without much issue, slight alignment issue where the x-pipe mates with the stock cats but a little jiggling of the x-pipe and the flex joints took care of it. Total install time from lift up to lift down, 1 hour.

BOLIO 671 · 03-31-2010, 10:30 PM

Great to hear and congrats on getting your exhaust in good shape with no issues regarding installation

1slow370 · 04-01-2010, 05:18 AM

Quote:

Originally Posted by ChrisSlicks

Installed mine yesterday, car sounds so much sweeter between 1K and 4K, it was like music to my ears!

Box was well packaged, all bolts and pieces were there.

Bolted up without much issue, slight alignment issue where the x-pipe mates with the stock cats but a little jiggling of the x-pipe and the flex joints took care of it. Total install time from lift up to lift down, 1 hour.

I'm at 3 weeks install time but it's not the exhausts fault. AAaagghh now nissan sucks at keeping a deadline.

Dembflyr · 04-04-2010, 11:12 PM

Where can we buy the CBE? Is it out to the general public yet?

Anyone have one that has decided to go a different route? I'll take it off your hands.

labk888 · 04-05-2010, 12:36 AM

I also would like to know if these are available to the public yet. I am trying to decide between Berk HFC + Berk CBE vs FI HFC + FI CBE. Has anyone experienced
both in person ?

1slow370 · 04-05-2010, 12:42 AM

got the car running friday just need to put in the last stub shaft before i can actually drive it but the differential is mounted in the car so i could put the back half of the exhaust on. had to finagle the bolts a little during install but nothing out of the ordinary for an exhaust. fit's good and the tips line up great. gave the stickers to my buddy to throw on his jetta we are ricing out.

Edit: also if the F.I. is louder than the berk there is no way in hell i would buy it as i like not being pulled over or having my neighbors call the cops.

BOLIO 671 · 04-05-2010, 05:31 AM

Quote:

Originally Posted by Dembflyr

Where can we buy the CBE? Is it out to the general public yet?

Anyone have one that has decided to go a different route? I'll take it off your hands.

Quote:

I also would like to know if these are available to the public yet. I am trying to decide between Berk HFC + Berk CBE vs FI HFC + FI CBE. Has anyone experienced
both in person ?

They're available to the public and have been....The first two group orders were the initial launch of the product...Just go to Berks website... www.berkstechnology.com or you can call them direct to place your order...FYI...you won't see the CBE on the website, because they haven't had time to update it...They've been busy working on back orders.....Since they're on back order right now, and you can anticipate a 4-6 week wait, as this exhaust system is custom built...The sooner you put in your order, the sooner you'll have it on your door step...You can expect a 5-7 week wait if you chose to go for the FI Exhaust, as both of these exhausts are in high demand!

370Zsteve · 04-05-2010, 11:01 AM

Quote:

Originally Posted by 1slow370

gave the stickers to my buddy to throw on his jetta we are ricing out.

Edit: also if the F.I. is louder than the berk there is no way in hell i would buy it as i like not being pulled over or having my neighbors call the cops.

The FI is louder if you get the big CF cans.

370Zsteve · 04-06-2010, 01:25 PM

Sorry folks, no pre-mod baseline on this dyno.

Results: 294 rwhp 236 Ft-Lb torque

Chart is here:

Nissan 370Z Forum - 370Zsteve's Album: Dyno ChartZ - Picture

MightyBobo · 04-06-2010, 04:00 PM

Nice, Steve. Ill probably be getting mine re-dyno-ed beginning of next month. Bleeding a bit in the pocketbook, this month...

MightyBobo · 04-06-2010, 04:12 PM

BTW, I called Berk about my exhaust being slightly to the right - they are sending me a spacer and 2 new gaskets, no questions asked. Thumbs up to them.

BOLIO 671 · 04-11-2010, 04:16 AM

Quote:

Originally Posted by 370Zsteve

The FI is louder if you get the big CF cans.

One of the FI owners mentioned in a seperte thread that the 12" were louder than the 18"....

BOLIO 671 · 04-11-2010, 04:19 AM

Quote:

Originally Posted by 370Zsteve

Sorry folks, no pre-mod baseline on this dyno.

Results: 294 rwhp 236 Ft-Lb torque

Chart is here:

Nissan 370Z Forum - 370Zsteve's Album: Dyno ChartZ - Picture

That's pretty impressive...especially coming from a Mustang Dyno.....I know that you didn't do a baseline...but do you really feel a difference on the butt dyno?

03-31-2010, 06:40 PM	#333 (permalink)
ChrisSlicks A True Z Fanatic Join Date: Mar 2009 Location: North East Posts: 6,203 Drives: 09 370Z Sport M6 Rep Power: 653	Installed mine yesterday, car sounds so much sweeter between 1K and 4K, it was like music to my ears! Box was well packaged, all bolts and pieces were there. Bolted up without much issue, slight alignment issue where the x-pipe mates with the stock cats but a little jiggling of the x-pipe and the flex joints took care of it. Total install time from lift up to lift down, 1 hour. __________________ Hotchkis ARB \| Stillen CAI \| Art Pipes \| Berk CBE \| Stillen AP Racing Brakes \| AE Performance Oil Cooler \| BC Racing ER Coilovers \| Doran Control Arms

03-31-2010, 10:30 PM	#334 (permalink)
BOLIO 671 A True Z Fanatic Join Date: Mar 2010 Location: GUAHAN Posts: 1,198 Drives: To & From then Back Rep Power: 3399	Great to hear and congrats on getting your exhaust in good shape with no issues regarding installation __________________ 2013 Nismo Z34 / FI TT #091 / IG: @lilzilla_z34

04-05-2010, 12:36 AM	#337 (permalink)
labk888 Base Member Join Date: Dec 2008 Location: Big D Posts: 233 Drives: '10 370Z PW 6MT T&S Rep Power: 533	I also would like to know if these are available to the public yet. I am trying to decide between Berk HFC + Berk CBE vs FI HFC + FI CBE. Has anyone experienced both in person ? __________________ LABK 10' 370Z/PW/6MT/Touring Sport/Illum. Kicks/Ventureshield Ultra/F1 Pinnacle 15% Tint/PLX KIWI

04-05-2010, 12:42 AM	#338 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	got the car running friday just need to put in the last stub shaft before i can actually drive it but the differential is mounted in the car so i could put the back half of the exhaust on. had to finagle the bolts a little during install but nothing out of the ordinary for an exhaust. fit's good and the tips line up great. gave the stickers to my buddy to throw on his jetta we are ricing out. Edit: also if the F.I. is louder than the berk there is no way in hell i would buy it as i like not being pulled over or having my neighbors call the cops. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

04-06-2010, 01:25 PM	#341 (permalink)
370Zsteve A True Z Fanatic Join Date: Sep 2009 Location: Gold Coast CT Posts: 10,599 Drives: 2019 Corvette G.S. Rep Power: 43	Mustang Dyno - Berk Xpipe CBE with stock cats Sorry folks, no pre-mod baseline on this dyno. Results: 294 rwhp 236 Ft-Lb torque Chart is here: Nissan 370Z Forum - 370Zsteve's Album: Dyno ChartZ - Picture __________________ SOLD MY Z MARCH 2018 - another Core OG moves on - new ride 2019 Z Corvette Grand Sport - no mods necessary but already have eyes on HFC and intakes LOL IT NEVER ENDS.

04-04-2010, 11:12 PM	#336 (permalink)
Dembflyr Track Member Join Date: Feb 2010 Location: Indiana Posts: 886 Drives: G37S Sedan Rep Power: 16	Where can we buy the CBE? Is it out to the general public yet? Anyone have one that has decided to go a different route? I'll take it off your hands.

04-06-2010, 04:00 PM	#342 (permalink)
MightyBobo A True Z Fanatic Join Date: Feb 2009 Location: Las Vegas, NV Posts: 8,465 Drives: No cars; only bikes Rep Power: 52	Nice, Steve. Ill probably be getting mine re-dyno-ed beginning of next month. Bleeding a bit in the pocketbook, this month... __________________ I don't own a car anymore.

04-06-2010, 04:12 PM	#343 (permalink)
MightyBobo A True Z Fanatic Join Date: Feb 2009 Location: Las Vegas, NV Posts: 8,465 Drives: No cars; only bikes Rep Power: 52	BTW, I called Berk about my exhaust being slightly to the right - they are sending me a spacer and 2 new gaskets, no questions asked. Thumbs up to them. CTownZ likes this. __________________ I don't own a car anymore.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SACLAM Limited Production Exhaust System	SoCal 370Z	Intake/Exhaust	56	01-06-2015 12:19 PM
Installed Berk Test pipe	>135I	Exterior & Interior	13	09-11-2009 10:04 PM
Nismo S-Tune Exhaust (15-5850) vs. Nismo H-Pipe Config Exhaust	scruffydog	Intake/Exhaust	7	07-17-2009 07:33 PM
X-pipe exhaust system....take a look, boombop shop exhaust	genki370z	Intake/Exhaust	2	07-03-2009 03:27 AM