injen cold air intakes! or still G3 intakes? wich is better

fg2rick · 12-08-2009, 08:47 AM

Wich du u think would be better performance wize injen cai's or stillen g3 intakes? Thanx guys

m4a1mustang · 12-08-2009, 09:58 AM

English, much?

A quick search on the intakes will pull up a lot of good info. We've pretty much determined that the G3 is the best available CAI, with the Injen trailing a little bit behind. These are the only two intakes shown to produce material gains.

If power is your only concern -- go for the G3s. If you don't like the idea of an oiled filter or any of that jazz, then the Injen might be a better fit for you.

Zsteve · 12-08-2009, 10:02 AM

Quote:

Originally Posted by m4a1mustang

English, much?

A quick search on the intakes will pull up a lot of good info. We've pretty much determined that the G3 is the best available CAI, with the Injen trailing a little bit behind. These are the only two intakes shown to produce material gains.

If power is your only concern -- go for the G3s. If you don't like the idea of an oiled filter or any of that jazz, then the Injen might be a better fit for you.

Well Modshacks intakes and DIY vents showed good gains if not the same gains too.

Modshack · 12-08-2009, 11:44 AM

Quote:

Originally Posted by Zsteve

Well Modshacks intakes and DIY vents showed good gains if not the same gains too.

Well...I suspect they're as good! Haven't dyno'd them but:

1) IAT's are low and in-line with the G3's

2) I have reconfigured MAF tubes to lean the mix a bit (Stillen does this by Maf positioning from what I can tell)

Zsteve · 12-08-2009, 11:58 AM

Quote:

Originally Posted by Modshack

Well...I suspect they're as good! Haven't dyno'd them but:

1) IAT's are low and in-line with the G3's

2) I have reconfigured MAF tubes to lean the mix a bit (Stillen does this by Maf positioning from what I can tell)

speaking of leaning out. With the FI exhaust on now for a good couple of weeks, my exhaust tips are still nice and shinny. So Im assuming the exhaust leaned me out, is that a good thing?

Modshack · 12-08-2009, 12:34 PM

Quote:

Originally Posted by Zsteve

speaking of leaning out. With the FI exhaust on now for a good couple of weeks, my exhaust tips are still nice and shinny. So Im assuming the exhaust leaned me out, is that a good thing?

Probably a bit..

Stock, the ECU needs a 10-12% fuel correction from rich to balance things to stochiometric. This is why bolt-ons have such a big HP effect on this car. By bringing fuel corrections closer to Zero (leaner) the car makes more power yet is perfectly within desired limits for Emissions and correct A/F ratios ..

RCZ · 12-08-2009, 01:29 PM

Quote:

Originally Posted by fg2rick

Wich du u think would be better performance wize injen cai's or stillen g3 intakes? Thanx guys

Please write English correctly, you look like a clown/idiot.

Stillen gets my vote.

m4a1mustang · 12-08-2009, 01:33 PM

Quote:

Originally Posted by Zsteve

Well Modshacks intakes and DIY vents showed good gains if not the same gains too.

The reason I didn't mention Steve is because his are not mass-produced for retail sale.

ChrisSlicks · 12-08-2009, 02:48 PM

Quote:

Originally Posted by fg2rick

Wich du u think would be better performance wize injen cai's or stillen g3 intakes? Thanx guys

This isn't the Honda Civic forums

dcrew1x · 12-08-2009, 02:48 PM

I won't really comment on what would be better since I own Stillen Gen3's but I will say this: Don't bother or waste your money with short ram intakes

theDreamer · 12-08-2009, 02:49 PM

Quote:

Originally Posted by dcrew1x

I won't really comment on what would be better since I own Stillen Gen3's but I will say this: Don't bother or waste your money with short ram intakes

12-08-2009, 08:47 AM	#1 (permalink)
fg2rick Base Member Join Date: Dec 2009 Location: miami Posts: 2 Drives: civic si Rep Power: 16	injen cold air intakes! or still G3 intakes? wich is better Wich du u think would be better performance wize injen cai's or stillen g3 intakes? Thanx guys

12-08-2009, 09:58 AM	#2 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6963	English, much? A quick search on the intakes will pull up a lot of good info. We've pretty much determined that the G3 is the best available CAI, with the Injen trailing a little bit behind. These are the only two intakes shown to produce material gains. If power is your only concern -- go for the G3s. If you don't like the idea of an oiled filter or any of that jazz, then the Injen might be a better fit for you. __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

12-08-2009, 02:48 PM	#10 (permalink)
dcrew1x Track Member Join Date: Jun 2009 Location: SoCal Posts: 821 Drives: Graphite Bullet Rep Power: 369	I won't really comment on what would be better since I own Stillen Gen3's but I will say this: Don't bother or waste your money with short ram intakes __________________ 2009 PG 6MT Sports Stillen Gen3 CAI \| Stillen CBE \| AMS Short Shifter \| Nismo Brace Kit

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Injen Dual Cold Air Intakes Nissan 370Z Z34 : INTENSEPOWER!	INTENSEPOWER	Exhaust/Intake	138	08-08-2011 01:34 PM
INJEN COLD AIR INTAKES now in stock at AMPLFIED	LOU@AMPLIFIED	Exhaust/Intake	30	11-02-2010 04:24 AM
370Z Injen Dual Intakes @ The 370ZSOURCE!!!!	Michael@TheZStore	Exhaust/Intake	30	10-14-2009 02:39 PM
Any other Intakes other than Stillen and Injen?	TipsZ	Intake/Exhaust	35	08-26-2009 03:25 PM