Replaced M370 with z1 intake plenum

Spartan 1771

I've been considering EcuTek after I get all my mods bolted on. How do you like Uprev?

__________________
~Rob

-DD Air Guide, Stillen G3 CAIs, 63mm Throttle Bodies, Motordyne M370, Berk HFCs, FI TDX CBE (non-res, CF), Sprint booster v3, Ecutek Dyno Tuned, and the list goes on...

Eighties Meta

No issues. Perfectly happy with uprev.

Sent from my SAMSUNG-SM-G870A using Tapatalk

__________________
2009 370z Touring 7AT/AAM 2.5 true dual exhaust/AAM DE test pipes/z1 vqde35 headers/AAM cold air intake (R-line)/Motordyne M370/Quaife LSD/z1 brake upgd pkg/Swift Spec-R springs/WhiteLine Front&Rear sway bars with endlinks

Spartan 1771

Well good luck today. Be sure to post the results.

__________________
~Rob

-DD Air Guide, Stillen G3 CAIs, 63mm Throttle Bodies, Motordyne M370, Berk HFCs, FI TDX CBE (non-res, CF), Sprint booster v3, Ecutek Dyno Tuned, and the list goes on...

Eighties Meta

Exhaust leak was also discovered today. Both sides z1 headers to test pipe, one side test pipes to y-pipe. That work is being done as we speak.

Bear in mind none of these numbers means much until i get it on the dyno at AAM to compare.

Results are STD not SAE and it was 328.11, 259.72. If subtract 4% to get the SAE guess then its 315. I highly doubt i lost power but right now comparing one dyno SAE and another STD, both dynojet. I havent even driven it yet. Anyway, just wanted to update.

Next update after driving it home and getting on it a bit then i'll schedule some pulls on AAM dyno for a direct compare.

Sent from my SAMSUNG-SM-G870A using Tapatalk

__________________
2009 370z Touring 7AT/AAM 2.5 true dual exhaust/AAM DE test pipes/z1 vqde35 headers/AAM cold air intake (R-line)/Motordyne M370/Quaife LSD/z1 brake upgd pkg/Swift Spec-R springs/WhiteLine Front&Rear sway bars with endlinks

Eighties Meta

Dyno sheet from R/T. Traffic was really a mess coming home during rush hour and this morning still havent really been able to open it long enough. So far so good as it mich more quiet with the leaks fixed

20170109_123411.jpg

Sent from my SAMSUNG-SM-G870A using Tapatalk

__________________
2009 370z Touring 7AT/AAM 2.5 true dual exhaust/AAM DE test pipes/z1 vqde35 headers/AAM cold air intake (R-line)/Motordyne M370/Quaife LSD/z1 brake upgd pkg/Swift Spec-R springs/WhiteLine Front&Rear sway bars with endlinks

ajcool2

Not bad at all. I'm also in MD and have similar mods. Here's my results with the Z1 plenum.

__________________
09 Touring 12.33@113mph 338whp

chuckie311

how is this broken down
Blue stock
Pink uprev tuned or no tune and just boltons?
Green Ecutek
Red Z1 manifold and Ecutek retune

__________________
Tuned by (Seb@Specialty-Z)
2011 G37 Cam'd FBO 347whp 280wtq Corn Fed 4.08 Gears

Eighties Meta

Still waiting to get on dyno at AAM. Hopefully next week. Possible exhaust leak again, shop is checking it today around 5pm.

Anyway my last dyno about 6 months ago at AAM with the motordyne manifold was 323 SAE. I am really curious to see what it is now so its getting done as quickly as i can get it done so i can be a direct compare.

Sent from my SAMSUNG-SM-G870A using Tapatalk

__________________
2009 370z Touring 7AT/AAM 2.5 true dual exhaust/AAM DE test pipes/z1 vqde35 headers/AAM cold air intake (R-line)/Motordyne M370/Quaife LSD/z1 brake upgd pkg/Swift Spec-R springs/WhiteLine Front&Rear sway bars with endlinks

Spartan 1771

AAM in Annapolis Junction?

__________________
~Rob

-DD Air Guide, Stillen G3 CAIs, 63mm Throttle Bodies, Motordyne M370, Berk HFCs, FI TDX CBE (non-res, CF), Sprint booster v3, Ecutek Dyno Tuned, and the list goes on...

Eighties Meta

Thats the one.

Sent from my SAMSUNG-SM-G870A using Tapatalk

__________________
2009 370z Touring 7AT/AAM 2.5 true dual exhaust/AAM DE test pipes/z1 vqde35 headers/AAM cold air intake (R-line)/Motordyne M370/Quaife LSD/z1 brake upgd pkg/Swift Spec-R springs/WhiteLine Front&Rear sway bars with endlinks

Spartan 1771

I called there to talk about an Ecutek tune, they said the Master Tuner would call me back, but he never did. I guess I will have to call again.

__________________
~Rob

-DD Air Guide, Stillen G3 CAIs, 63mm Throttle Bodies, Motordyne M370, Berk HFCs, FI TDX CBE (non-res, CF), Sprint booster v3, Ecutek Dyno Tuned, and the list goes on...

Spartan 1771

Ever get a chance to run on the dyno again and find out the difference between the two manifolds?

__________________
~Rob

-DD Air Guide, Stillen G3 CAIs, 63mm Throttle Bodies, Motordyne M370, Berk HFCs, FI TDX CBE (non-res, CF), Sprint booster v3, Ecutek Dyno Tuned, and the list goes on...

Eighties Meta

Unfortunately I have not. I actually had it retuned at R/T tuning so it wasnt the same dyno so its not a real good comparison but for what its wort R/T was STD at 328, AAA was 323 SAE both dynojet but since my m370 was AAM dyno i doubt this proves anything. My cars at 115k now so i dont drive it hard anymore for the most part. Still purrin'

Sent from my SAMSUNG-SM-G870A using Tapatalk

__________________
2009 370z Touring 7AT/AAM 2.5 true dual exhaust/AAM DE test pipes/z1 vqde35 headers/AAM cold air intake (R-line)/Motordyne M370/Quaife LSD/z1 brake upgd pkg/Swift Spec-R springs/WhiteLine Front&Rear sway bars with endlinks

Cranberry

would have loved to see the difference. I went with the M370 manifold this summer and after the tune Id have to say the difference was jaw dropping, intake manifold with the tune was by far the biggest gain I saw next to the nitrous.

__________________
2009 370z M/T - straight pipe cut outs / motordyne test pipes & intake manifold / K&N typhoon intake / ACT stage 2 race clutch & flywheel / ZEX wet nitrous / UpRev tune / stillen race oil cooler / 317 WHP N/A - 381 WHP with ZEX www.youtube.com/danialk ///\\\///\\\ Follow me on Instagram @dankobra

Spartan 1771

Same here.

__________________
~Rob

-DD Air Guide, Stillen G3 CAIs, 63mm Throttle Bodies, Motordyne M370, Berk HFCs, FI TDX CBE (non-res, CF), Sprint booster v3, Ecutek Dyno Tuned, and the list goes on...