PPE LTH + MOTORDYNE E370 CBE + UpRev

YGhasir

Hi guys
Im looking to install the parts listed below on my 2010 370Z fully stock.
---------
PPE LTH
MOTORDYNE SHOCKWAVE E370 CBE
Silicone air intake hose (Stock CAI)
With UpRev tuning.

My Q:

PPE LTH will delete Stock cat so do i need to add HFC or Tp?

The Check Engine Light will flashed on? And is there a solution to avoid the subject?

About How many Hp excepted to be obtain through these parts?

Agent K

You can't have PPE LTH and [HFC or TPs] at the same time. All cats are deleted once LTH are installed. You would have to order short tube headers if you want [HFC or TPs].

You shouldn't get a SES/check engine light with a tune. But you will get one without a tune.

IIRC, the manufacturer of PPE headers dynoed gains at 50 hp (not rear wheel hp).

__________________
'13 370Z Midnight Blue 6MT / Touring Sport w/nav / PPE Long Tube Racing Headers / FI TDX 10" Resonator w/CF mufflers / K&N Drop-Ins / ZSpeed Underbody Shroud v2 / DRL 'always on' Mod

ChaseZ

I've never thrown a code with that setup, even before a tune.
you don't need HFC or TP it will just bolt up to the e370 and you're all good.

Excellent choice of exhaust btw

YGhasir

Thanks
I heard the only PPE LTH with stock exhaust + tune gain 35 whp
What about the PPE LTH with F.I did you dyno it ? And what about the loud ?

SS_Firehawk

It will be loud, it will take a higher pitch. With a fast intentions exhaust, I'd recommend resonators. They make good power. I had them on my last Z. I'm trying the Z1 headers this time around. There are options if you want cats. Motordyne has a y pipe with a hfc's option. Their e370 exhaust has a cat option if you contact them. Fast Intentions also has the option for 100 cell cats as well.

__________________

YGhasir

Thanks

I thing it will be very louded
Also when comparing the price with the HP Gain makes you hesitate to buy them

YGhasir

Thank you
So you recommended motordyne LTH with HFC wich is coastly ? Or short headers?
I can't find the link that i saw it before for PPE + shockwave cbe
I thing stillen or top speed Headers Just losing money

SS_Firehawk

Motordyne does have their own headers and they look good. Dyno show they make similar power. I was saying Motordyne has the option to add cats into their CBE. The PPE headers can get pricey, but you have the option for that merged collector that flows better than a standard collector with a cone, which I believe the type motordyne uses. It may be a cost of a few hp at most with normal Bolt on street tunes cars.

Z1, Motordyne, PPE, and Fast Intentions are the only worthwhile headers if you're gonna spend your hard earned cash, that my opinion.

__________________

SS_Firehawk

If you don't need cats, don't get em. You'll make more power

__________________

Agent K

I haven't gotten a tune yet with my set-up so no dyno numbers.

I had a set-up without resonators and couldn't take the noise or drone...too loud for me. So, I got resonators welded back on.

Also, after 6000 miles, I got a SES light because of no cats.

__________________
'13 370Z Midnight Blue 6MT / Touring Sport w/nav / PPE Long Tube Racing Headers / FI TDX 10" Resonator w/CF mufflers / K&N Drop-Ins / ZSpeed Underbody Shroud v2 / DRL 'always on' Mod

Spooler

You need a tune bad. Most folks run into a lean condition if not tuned with long tube headers.

YGhasir

Yes that what I'm thinking about it, more gain, no over load, inexpensive
And my next step will be W/Methanol injection sysrem that i expect add 20+ whp.
I dond know if Motordyne company they have shipping method to UNITED ARAB EMIRATES

Because i want to order my parts from CZP website.

YGhasir

Yes my opinion you will not be safe and get the maximum Smoothness and gain without tune.
However with porsche ECU, No need to tun, just replace the parts and double press on pedal.