Custom muffler.. cheap alternative?

Gunzero · 11-17-2009, 10:31 PM

Hi.. this sounds badass. All he did was remove the muffler and have some local guy make some custom pipes and tips. Makes me jizzz.
EDIT: OMG! spearfish25 is here in forums awesomeeeeeeeeeeee! gonna have to PM him about a possible replication XD

kdo2milger · 11-17-2009, 10:39 PM

how much did it cost to run the pipes and tips...

sounds pretty good too...

do you have some pics of the rear you can post here...

Rogue Z · 11-17-2009, 10:41 PM

Funny.."Sounds Nice" haha is there any horsepower gain?

Gunzero · 11-17-2009, 10:41 PM

I found out he was selling this for 120$

I PMd him if it was possible for his local guy to make another one for me.
@Rogue Z: I don't want to spend $1k+ on an exhaust system until I finish college

for now I'm looking for something to make my nuts vibrate
FS: Custom pipes and tips (muffler delete)

kdo2milger · 11-17-2009, 10:52 PM

oh yah, that was a while back...forgot about that...

seems like it would be a good market for the z...

Gunzero · 11-17-2009, 10:56 PM

hell yea! we have teenagers around here who can't spend much money but would like to wake up the Z. This definately would wake it up haha

kdo2milger · 11-17-2009, 10:59 PM

mieneke muffler or one of those type of muffler shops should be able to do the same...

Gunzero · 11-17-2009, 11:06 PM

Hmm, well I'll wait for spear's response about the size of the tips, materials used, etc.. cause this soundssssssssss wooooo

spearfish25 · 11-17-2009, 11:07 PM

Yep, that was me. I had a guy on the south side of Chicago fabricate the pipes and tips. Total cost was about $160 and 2 hours of work. The sound was intoxicating...especially the idling and low throttle 'burble'. Damn I miss that. The problem was that at 3500 to 4500 RPM, it was so loud and droning that I thought my ears would bleed.

For anyone interested, I had it done by Tom at One Stop Muffler in East Chicago. I've since swapped it for a Stillen CBE. The Stillen still sounds great but not as loud and without any drone. It's lost the race car exotic sound but still sounds great. With the custom pipes and muffler delete, anyone within 3 blocks of me would turn their head and try to see what supercar was about to pass them by

. (they were positive stares, not the pissed off stares)

Tips were SS and 4" diameter I think (slightly smaller than the 4.5" Stillen tips). The pipes for the delete were aluminum...nothing special except for a flange and the tips welded on. This car just wants to sound like a beast without anything special needing to be done to get it that way.

spearfish25 · 11-17-2009, 11:13 PM

Quote:

Originally Posted by kdo2milger

how much did it cost to run the pipes and tips...

sounds pretty good too...

do you have some pics of the rear you can post here...

Total cost was $160 for 2 hours of work. Solus bought them from me...maybe he has some pics from the back. I think I pulled them off before I took any pics.

kdo2milger · 11-17-2009, 11:17 PM

Quote:

Originally Posted by spearfish25

Total cost was $160 for 2 hours of work. Solus bought them from me...maybe he has some pics from the back. I think I pulled them off before I took any pics.

hey spear, i saw the pics in your thread, looks like he did a good job on them...

how you liken the stillen cbe?

you going to get the gen 3's too?

Gunzero · 11-17-2009, 11:47 PM

sooooo mad

i hate you solus XD

Solus · 11-18-2009, 08:48 AM

Sorry lol.. I have been meaning to get video of it up. They are on now with test pipes... it really pisses off the gate guards in the morning going on base because they are right beside a brick building when you come in the gate so intentionally pipe them every morning because they irritate me lol.. anyways.. I have been promising spear and a couple people i would get video up.. i have one or two taken.. this weekend we are going to get a start up, take off, and drive by video and an in car video w/ windows up and down if we can... then i have to get it onto the computer, my wife is deployed and i am mildly computer retarded so it will be hell to figure it out but i will get it for you guys.. and the drone is still pretty prevalent but its betweeen 2500-3500 ish on mine.. don't know why its different.. i don't mind it though.. i kinda like it.. i am half deaf from explosions anyways

kdo2milger · 11-18-2009, 08:54 AM

can you do some stills too?

Gunzero · 11-18-2009, 09:39 AM

damnit i want one! Was it a direct bolt on or did u have to weld it.

11-17-2009, 10:31 PM	#1 (permalink)
Gunzero Track Member Join Date: Oct 2009 Location: Texas Posts: 889 Drives: Nissan 370z Rep Power: 259	Custom muffler.. cheap alternative? Hi.. this sounds badass. All he did was remove the muffler and have some local guy make some custom pipes and tips. Makes me jizzz. EDIT: OMG! spearfish25 is here in forums awesomeeeeeeeeeeee! gonna have to PM him about a possible replication XD __________________ Last edited by Gunzero; 11-17-2009 at 10:36 PM.

11-17-2009, 10:39 PM	#2 (permalink)
kdo2milger OG Priesthood Join Date: Feb 2009 Location: Fargo, ND Posts: 17,859 Drives: NISMO T Rep Power: 59	how much did it cost to run the pipes and tips... sounds pretty good too... do you have some pics of the rear you can post here... __________________ Project *NISMO*

11-17-2009, 10:41 PM	#3 (permalink)
Rogue Z Track Member Join Date: May 2009 Location: Los Angeles Posts: 559 Drives: 2009 Silver MT 370Z Rep Power: 18	Funny.."Sounds Nice" haha is there any horsepower gain? __________________

11-17-2009, 10:41 PM	#4 (permalink)
Gunzero Track Member Join Date: Oct 2009 Location: Texas Posts: 889 Drives: Nissan 370z Rep Power: 259	I found out he was selling this for 120$ I PMd him if it was possible for his local guy to make another one for me. @Rogue Z: I don't want to spend $1k+ on an exhaust system until I finish college for now I'm looking for something to make my nuts vibrate FS: Custom pipes and tips (muffler delete) __________________

11-17-2009, 10:52 PM	#5 (permalink)
kdo2milger OG Priesthood Join Date: Feb 2009 Location: Fargo, ND Posts: 17,859 Drives: NISMO T Rep Power: 59	oh yah, that was a while back...forgot about that... seems like it would be a good market for the z... __________________ Project *NISMO*

11-17-2009, 10:56 PM	#6 (permalink)
Gunzero Track Member Join Date: Oct 2009 Location: Texas Posts: 889 Drives: Nissan 370z Rep Power: 259	hell yea! we have teenagers around here who can't spend much money but would like to wake up the Z. This definately would wake it up haha __________________

11-17-2009, 10:59 PM	#7 (permalink)
kdo2milger OG Priesthood Join Date: Feb 2009 Location: Fargo, ND Posts: 17,859 Drives: NISMO T Rep Power: 59	mieneke muffler or one of those type of muffler shops should be able to do the same... __________________ Project *NISMO*

11-17-2009, 11:06 PM	#8 (permalink)
Gunzero Track Member Join Date: Oct 2009 Location: Texas Posts: 889 Drives: Nissan 370z Rep Power: 259	Hmm, well I'll wait for spear's response about the size of the tips, materials used, etc.. cause this soundssssssssss wooooo __________________

11-17-2009, 11:07 PM	#9 (permalink)
spearfish25 A True Z Fanatic Join Date: Mar 2009 Location: Naples, FL Posts: 4,117 Drives: to work Rep Power: 1856	Yep, that was me. I had a guy on the south side of Chicago fabricate the pipes and tips. Total cost was about $160 and 2 hours of work. The sound was intoxicating...especially the idling and low throttle 'burble'. Damn I miss that. The problem was that at 3500 to 4500 RPM, it was so loud and droning that I thought my ears would bleed. For anyone interested, I had it done by Tom at One Stop Muffler in East Chicago. I've since swapped it for a Stillen CBE. The Stillen still sounds great but not as loud and without any drone. It's lost the race car exotic sound but still sounds great. With the custom pipes and muffler delete, anyone within 3 blocks of me would turn their head and try to see what supercar was about to pass them by . (they were positive stares, not the pissed off stares) Tips were SS and 4" diameter I think (slightly smaller than the 4.5" Stillen tips). The pipes for the delete were aluminum...nothing special except for a flange and the tips welded on. This car just wants to sound like a beast without anything special needing to be done to get it that way. __________________ 2013 Cadillac V-Wagon, RIP Z

11-17-2009, 11:47 PM	#12 (permalink)
Gunzero Track Member Join Date: Oct 2009 Location: Texas Posts: 889 Drives: Nissan 370z Rep Power: 259	sooooo mad i hate you solus XD __________________

11-18-2009, 08:48 AM	#13 (permalink)
Solus Enthusiast Member Join Date: Apr 2009 Location: Jacksonville, NC Posts: 453 Drives: 2009 Nissan 370z Rep Power: 16	Sorry lol.. I have been meaning to get video of it up. They are on now with test pipes... it really pisses off the gate guards in the morning going on base because they are right beside a brick building when you come in the gate so intentionally pipe them every morning because they irritate me lol.. anyways.. I have been promising spear and a couple people i would get video up.. i have one or two taken.. this weekend we are going to get a start up, take off, and drive by video and an in car video w/ windows up and down if we can... then i have to get it onto the computer, my wife is deployed and i am mildly computer retarded so it will be hell to figure it out but i will get it for you guys.. and the drone is still pretty prevalent but its betweeen 2500-3500 ish on mine.. don't know why its different.. i don't mind it though.. i kinda like it.. i am half deaf from explosions anyways

11-18-2009, 08:54 AM	#14 (permalink)
kdo2milger OG Priesthood Join Date: Feb 2009 Location: Fargo, ND Posts: 17,859 Drives: NISMO T Rep Power: 59	can you do some stills too? __________________ Project *NISMO*

11-18-2009, 09:39 AM	#15 (permalink)
Gunzero Track Member Join Date: Oct 2009 Location: Texas Posts: 889 Drives: Nissan 370z Rep Power: 259	damnit i want one! Was it a direct bolt on or did u have to weld it. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GT Motoring - custom tow hook finshing pics, Custom finishes now available	GT Motoring	Exterior & Interior	45	09-05-2010 04:31 AM
FS: Custom pipes and tips (muffler delete)	spearfish25	Parts for sale (Private Classifieds)	17	03-21-2010 11:22 PM
Just Muffler and tips?	ddvette9	Intake/Exhaust	7	10-05-2009 11:20 AM
CA Front License Plate Alternative	DRUZ370	DIY Section (Do-It-Yourself)	9	06-24-2009 03:10 PM
List of Good Aftermarket Nav unit/Alternative HU inside:	Asheth	Audio & Video	27	03-16-2009 07:58 PM