Test Pipe vs HFC

TerribleONE · 03-11-2016, 04:51 PM

Quote:

Originally Posted by Chuck33079

There are far more members with popped motors from super chargers than turbos.

Quote:

Originally Posted by Chuck33079

Ss sold that car a long time ago. And that kit never ran right and isn't available. Your only sc option is stillen, and that kit has significant drawbacks.

SS_Firehawk · 03-11-2016, 06:15 PM

I'll add input when I have some time. I'm busy as all hell today

p3t3rc · 03-11-2016, 06:16 PM

Quote:

Originally Posted by SS_Firehawk

I'll add input when I have some time. I'm busy as all hell today

Much appreciated!

Sent from my iPhone using Tapatalk

p3t3rc · 03-15-2016, 05:31 PM

So I've been doing a little looking around and stumbled on the ARK RSpec Res TP.. does the Helmholtz Chamber make a world of different in terms of back pressure? Or again is this is just negligible and left all to preference..

SS_Firehawk · 03-15-2016, 07:34 PM

I finally have some time for a proper reply. So to give you a straight answer; for $15,000, it is not worth getting the twin supercharged system. I got it for $10k installed. For that price, it was worth trying. When I first drove it, the thing was an animal. After a month of having it home, it just never made that kind of power anymore. Two tensioner pulleys broke, the stock tensioner pulley broke, belts shredded, and it squealed. I do believe those issues could be fixed, but I was tired of dragging it from place to place trying to get it to run right. I plugged in a basic boost gauge under the hood to see what it was making, somehow it went from 12lbs to only 4. I took it to a shop and asked them to check the BPV's, and they had found they were completely loose, essentially bleeding boost out. After tightening them, it did gain a lot back, but it was in desperate need of a retune. I started getting nervous with all the small issues cropping up, so I cashed her in for $33,000 and started fresh.

So the pros with the kit...
I do believe this kit can easily make 650+whp with 84mm pulleys and a built motor.
It looks seriously awesome under the hood.
The power was very linear and got faster the higher you revved the thing.
It sounded wicked and long tubes fit with the kit.

The bad...
The pulley issue
The squealing
Can still make more power with a turbo
A lot of moving parts
The 3" intakes neck down going through the core support
It was made by GTM and their support was not the best.

p3t3rc · 03-15-2016, 07:37 PM

Quote:

Originally Posted by SS_Firehawk

I finally have some time for a proper reply. So to give you a straight answer; for $15,000, it is not worth getting the twin supercharged system. I got it for $10k installed. For that price, it was worth trying. When I first drove it, the thing was an animal. After a month of having it home, it just never made that kind of power anymore. Two tensioner pulleys broke, the stock tensioner pulley broke, belts shredded, and it squealed. I do believe those issues could be fixed, but I was tired of dragging it from place to place trying to get it to run right. I plugged in a basic boost gauge under the hood to see what it was making, somehow it went from 12lbs to only 4. I took it to a shop and asked them to check the BPV's, and they had found they were completely loose, essentially bleeding boost out. After tightening them, it did gain a lot back, but it was in desperate need of a retune. I started getting nervous with all the small issues cropping up, so I cashed her in for $33,000 and started fresh.

So the pros with the kit...
I do believe this kit can easily make 650+whp with 84mm pulleys and a built motor.
It looks seriously awesome under the hood.
The power was very linear and got faster the higher you revved the thing.
It sounded wicked and long tubes fit with the kit.

The bad...
The pulley issue
The squealing
Can still make more power with a turbo
A lot of moving parts
The 3" intakes neck down going through the core support
It was made by GTM and their support was not the best.

Thanks for your input. Sounds like it can take a turn for the worst very quickly.

Sent from my iPhone using Tapatalk

03-11-2016, 06:15 PM	#77 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7335	I'll add input when I have some time. I'm busy as all hell today __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

03-15-2016, 07:34 PM	#80 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7335	I finally have some time for a proper reply. So to give you a straight answer; for $15,000, it is not worth getting the twin supercharged system. I got it for $10k installed. For that price, it was worth trying. When I first drove it, the thing was an animal. After a month of having it home, it just never made that kind of power anymore. Two tensioner pulleys broke, the stock tensioner pulley broke, belts shredded, and it squealed. I do believe those issues could be fixed, but I was tired of dragging it from place to place trying to get it to run right. I plugged in a basic boost gauge under the hood to see what it was making, somehow it went from 12lbs to only 4. I took it to a shop and asked them to check the BPV's, and they had found they were completely loose, essentially bleeding boost out. After tightening them, it did gain a lot back, but it was in desperate need of a retune. I started getting nervous with all the small issues cropping up, so I cashed her in for $33,000 and started fresh. So the pros with the kit... I do believe this kit can easily make 650+whp with 84mm pulleys and a built motor. It looks seriously awesome under the hood. The power was very linear and got faster the higher you revved the thing. It sounded wicked and long tubes fit with the kit. The bad... The pulley issue The squealing Can still make more power with a turbo A lot of moving parts The 3" intakes neck down going through the core support It was made by GTM and their support was not the best. __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Should I go for tune with test pipe or ART pipe?	Andy124	Tuning	3	02-04-2013 02:32 AM
test pipe?	ltayaba29	Intake/Exhaust	3	07-27-2012 06:23 AM
*MXP 370z Test Pipe SUPER SALE* \| Resonated and Straight Pipe	SE	Exhaust/Intake	10	04-17-2012 06:33 PM
Ebay test-pipe and y-pipe combo	harman.khinda	Intake/Exhaust	6	02-13-2012 09:43 PM
HFC or test pipe?	allenhhp	Intake/Exhaust	11	05-24-2010 10:25 PM

03-15-2016, 05:31 PM	#79 (permalink)
p3t3rc Base Member Join Date: Jan 2016 Location: Los Angeles Posts: 86 Drives: 09 Nissan 370z Wht M Rep Power: 9	So I've been doing a little looking around and stumbled on the ARK RSpec Res TP.. does the Helmholtz Chamber make a world of different in terms of back pressure? Or again is this is just negligible and left all to preference..