AAM Competition VQ37 Intake Manifold Pre-sale!!!

1cintron · 05-23-2016, 11:40 AM

Quote:

Originally Posted by JARblue

Well, apparently the only one in existence is there. See if they can get the raffle winner to install and dyno it for results while there

nope, they only had a 3D printed model.

Rusty · 05-23-2016, 01:01 PM

Quote:

Originally Posted by 1cintron

nope, they only had a 3D printed model.

Yeap, they only had 2 3D printed models there. I took pictures. Will post up later.

Elmo370z · 05-23-2016, 11:01 PM

You were at z day?

Rusty · 05-24-2016, 12:26 AM

Quote:

Originally Posted by Elmo370z

You were at z day?

Me, yup.

V1H · 05-24-2016, 05:05 AM

Rusty did u spot the intake manifold on there?

Sent from my iPhone using Tapatalk

Rusty · 05-24-2016, 11:49 AM

Quote:

Originally Posted by V1H

Rusty did u spot the intake manifold on there?

Sent from my iPhone using Tapatalk

You mean this?

V1H · 05-24-2016, 11:52 AM

Oh ok, haven't seen these 3D printed samples yet. Was wondering whether you saw AAM exhibiting a real product at ZDayZ.

Sent from my iPhone using Tapatalk

Rusty · 05-24-2016, 11:55 AM

Quote:

Originally Posted by V1H

Oh ok, haven't seen these 3D printed samples yet. Was wondering whether you saw AAM exhibiting a real product at ZDayZ.

Sent from my iPhone using Tapatalk

The unicorn wasn't there.

TerribleONE · 05-24-2016, 11:55 AM

Sounds like it was just 3d printed models.

Elmo370z · 05-24-2016, 12:46 PM

I put a 100 bucks into this raffle trying to win this manifold

Z Runner · 05-24-2016, 12:53 PM

Quote:

Originally Posted by Rusty

You mean this?

Are they not real size?

TerribleONE · 05-24-2016, 12:54 PM

Quote:

Originally Posted by Elmo370z

I put a 100 bucks into this raffle trying to win this manifold

You cant win something that doesn't exist.

njobe89 · 05-24-2016, 01:07 PM

so what did you win?

bullitt5897 · 05-24-2016, 01:10 PM

They were not to actual size. However, I have some serious concerns after holding these in my hands... From the design it looks like several things will happen:

1. The rear two cylinders will get a lot of air since the throttle bodies literally open up to them.
2. The front two cylinders are going to starve for air based on what I could see.
3. The bridge design across the back acts as a balance tube. however, it is all squared off with hard 90* edges and lips. This will cause a vortex at the back of the manifold and as the air travels across the balance tube it will worsen as it hits incoming air from the other throttle body.

My fear with this intake is that you will over lean the rear to cylinders and the front two will starve for air relative to the rear two cylinders. I hope its not another kinetix intake manifold.

These are just my impressions from handling the units... it will be interesting to see the flow data.

Chuck33079 · 05-24-2016, 01:30 PM

Quote:

Originally Posted by bullitt5897

it will be interesting if we ever see the flow data.

Fixed.

05-24-2016, 05:05 AM	#140 (permalink)
V1H Base Member Join Date: Dec 2013 Location: United Kingdom Posts: 244 Drives: 2013 370Z-TT GT Edt Rep Power: 3367	Rusty did u spot the intake manifold on there? Sent from my iPhone using Tapatalk __________________ 501 BHP, 590 Nm (422 rwhp) *AAM* TT+I/Plenum\|*CJM* S1 FRS\|*C/Clutch* Stage 2\|*RJM* CMC\|*ZSpeed* CSC\|Z1 Oil cooler\|*Motordyne* Turbo ShockWave)))\|*Torqen* Coilovers\|*Stanceparts* AirCups\|*Amuse* bodykit\|*GReddy\|AEM\|ONEighty\|Mishimoto\|STILLEN\|Eibach\|SPL\|B&M\|Radium\|EcuTek\|BC Forged* RS45

05-24-2016, 11:52 AM	#142 (permalink)
V1H Base Member Join Date: Dec 2013 Location: United Kingdom Posts: 244 Drives: 2013 370Z-TT GT Edt Rep Power: 3367	Oh ok, haven't seen these 3D printed samples yet. Was wondering whether you saw AAM exhibiting a real product at ZDayZ. Sent from my iPhone using Tapatalk __________________ 501 BHP, 590 Nm (422 rwhp) *AAM* TT+I/Plenum\|*CJM* S1 FRS\|*C/Clutch* Stage 2\|*RJM* CMC\|*ZSpeed* CSC\|Z1 Oil cooler\|*Motordyne* Turbo ShockWave)))\|*Torqen* Coilovers\|*Stanceparts* AirCups\|*Amuse* bodykit\|*GReddy\|AEM\|ONEighty\|Mishimoto\|STILLEN\|Eibach\|SPL\|B&M\|Radium\|EcuTek\|BC Forged* RS45

05-24-2016, 11:55 AM	#144 (permalink)
TerribleONE A True Z Fanatic Join Date: Jan 2009 Location: Socal Posts: 10,203 Drives: WOT Rep Power: 5850	Sounds like it was just 3d printed models. __________________ 638WHP 541WTQ @ 13.5PSI Build thread

05-24-2016, 01:07 PM	#148 (permalink)
njobe89 A True Z Fanatic Join Date: May 2014 Location: Atlanta, GA Posts: 5,227 Drives: 2013 370z BS 6MT Rep Power: 174284	so what did you win? __________________ 2 plus 2 times 2 = ? ... hint, it's not 8 Stillen CBE, Stillen Gen 3, TP's, Uprev tuned - 324whp/264tq

05-24-2016, 01:10 PM	#149 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	They were not to actual size. However, I have some serious concerns after holding these in my hands... From the design it looks like several things will happen: 1. The rear two cylinders will get a lot of air since the throttle bodies literally open up to them. 2. The front two cylinders are going to starve for air based on what I could see. 3. The bridge design across the back acts as a balance tube. however, it is all squared off with hard 90* edges and lips. This will cause a vortex at the back of the manifold and as the air travels across the balance tube it will worsen as it hits incoming air from the other throttle body. My fear with this intake is that you will over lean the rear to cylinders and the front two will starve for air relative to the rear two cylinders. I hope its not another kinetix intake manifold. These are just my impressions from handling the units... it will be interesting to see the flow data. ANMVQ likes this. __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

05-23-2016, 11:01 PM	#138 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	You were at z day?

05-24-2016, 12:46 PM	#145 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	I put a 100 bucks into this raffle trying to win this manifold

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Oem parts for sale-intake manifold, clutch, flyweel, shifter, racing termostat	N370	Parts for sale (Private Classifieds)	14	05-17-2016 10:18 AM
selling used stillen G3 intake.Motordyne M370 Intake Manifold	01206	Canada	4	04-14-2016 02:31 AM
*Pre Order* AAM COMPETITION VQ37 PERFORMANCE INTAKE MANIFOLD	vividracing	Drivetrain/Engine	11	01-15-2016 05:02 PM
[FOR SALE] Kinetix Intake Manifold - VQ37	Greedy	Parts for sale (Private Classifieds)	49	03-22-2013 11:47 AM
[FOR SALE] Motordyne M370 Intake Manifold for sale	Mr.Squeeze	Parts for sale (Private Classifieds)	9	07-09-2011 01:19 AM