Early Easter Egg- New AAM Competition 370Z/G37 Product!

DeliriousClam · 02-09-2017, 02:16 PM

Quote:

Originally Posted by Patrick@AAMComp

Hey everyone,

My name is Patrick with AAM Competition. I'd like to apologize for the lack of response on this thread. It appears that Michael was far less active on this subject than we would have hoped.

From this point forward, feel free to ask me any questions you may have about the AAM Competition VQ37 Performance Intake Manifold!

Mike is terrible. I'm sponsored by AAM but anytime I e-mailed in with questions, I never got a response. I finally managed to get a response from him once I e-mailed your customer service department complaining about the lack of communication I got from him.

Hilla_killa · 02-09-2017, 02:42 PM

In for na dyno numbers! Alot of money to spend with no numbers given, especially after so long! Many of us are waiting for this!

Patrick@AAMComp · 02-09-2017, 03:59 PM

I wanted to provide you all with some additional background info concerning this project.

We ran into some issues with the intake manifold, which took us some time to overcome. Many of these delays are attributed to the casting process. The first limited batch of intake manifolds we originally received for testing purposes were terribly inconsistent in terms of their fit and finish. They did not live up to AAM Competition’s quality standards. The cast manufacturer had told us that this particular mold was extremely difficult to work with. Our engineer made some minor adjustments to the CAD design of the manifold to make the casting process more efficient and accurate. In order to implement these changes, the manufacturer then had to create an entirely new mold.

Once the new mold was completed, a new limited run of manifolds were put into production. After the revised manifolds had arrived, we could resume evaluating the units. These manifolds were MUCH more consistent, which definitely made our additional effort and investment worthwhile. During quality analysis, we quickly discovered that many of these intakes were not holding pressure. Ouch! ….. yet another hurdle to deal with. We promptly coordinated with the casting manufacturer to discuss this problem, ensure that a proper solution was put into place for production, and ordered yet ANOTHER set of intake manifolds.

All of that said, we’ve FINALLY received a limited run of manifolds which are not plagued with the prior production faults. With this batch, we were able to further review and analyze the units as we intended them to be. Dyno testing on a high power, high boost twin turbo 370Z (the type of application we designed the manifold around) proved a peak gain of 36whp/34ft. lbs. in the midrange! We are very pleased with these results, and look forward to pushing the manifolds even harder to see how they perform.

Although we do not anticipate significant gains for NA applications, we will be performing NA dyno testing as well. The AAM Competition VQ37 Performance Intake Manifold was specifically designed with high power forced induction in mind. For naturally aspirated vehicles, this will be primarily an aesthetic upgrade, with the added benefit of being much more durable than the OEM plastic manifold. I'll be sure to post these results here as soon as they are available.

Chuck33079 · 02-09-2017, 04:11 PM

$55/hp?

Patrick@AAMComp · 02-09-2017, 04:30 PM

Quote:

Originally Posted by Chuck33079

$55/hp?

Think about standard bolt-on cost to gain ratios, such as exhaust components. Also, you have to keep in mind that additional horsepower becomes even MORE difficult to achieve once you're in these higher ranges.

warpeacelove · 02-09-2017, 05:11 PM

Quote:

Originally Posted by Patrick@AAMComp

Think about standard bolt-on cost to gain ratios, such as exhaust components. Also, you have to keep in mind that additional horsepower becomes even MORE difficult to achieve once you're in these higher ranges.

Patrick the pricing is a bit much plus that doesn't includes taxes or shipping fees.

James10694 · 02-09-2017, 05:36 PM

I admit this product is on higher side as far as pricing goes, however y'all don't seem to mind paying $1600 for a fast intentions exhaust system. What are the gains ~20-25whp after a tune? What is that $65 per horsepower. C'mon man. Don't even get me started on meisterschaft and armytrix...

Don't get me wrong I love fast intentions and I myself own their exhaust and headers.

P.S. I am no way defending AAM after their long term lack of communication.

YzGyz · 02-09-2017, 05:48 PM

I'm just shaking my head... So all those hoops they had to jump through, all valid and it takes this long to get a response? That's poopy. I bet they tested the"bad" ones too. Saw that they were poopier ACS didn't post it. Anyhow, not going to stir that. But very cool and good to know the have things done now. AAM are still on my "Never buy from" list unless they have a crazy stupid deal. It's not worth "saving $" if you never get the product...

YzGyz

chuckie311 · 02-09-2017, 11:43 PM

basically worthless if you are staying N/A

Z Runner · 02-10-2017, 02:41 AM

Wow the all new tread WHOOOOO pre sale take II

Im just saying but i just browsed threw all 5 pages and see no real manifold images whats up? Whats the big secret? Can we have a looksy first its been a very very long time? Maybe few phone photos at list.

Looks like corp. plan "B" in action

chuckie311 · 02-10-2017, 07:53 AM

Go to there website plenty of pictures of it there

Chuck33079 · 02-10-2017, 08:09 AM

Quote:

Originally Posted by Patrick@AAMComp

Think about standard bolt-on cost to gain ratios, such as exhaust components. Also, you have to keep in mind that additional horsepower becomes even MORE difficult to achieve once you're in these higher ranges.

Actually, I'm thinking that an intake manifold will show its best performance on a big turbo build like you showed. So the 36 hp for $2000 is really a best case scenario, not what the average buyer can expect, right?

Also, given the track record of your company and specifically with this product, your numbers are going to be suspect. Are there any third part dynos from your customers that corroborate your gains shown above?

Nico-derm · 02-10-2017, 08:55 AM

Quote:

Originally Posted by chuckie311

basically worthless if you are staying N/A

Would still be nice to know how "Worthless". Is it going to be an aesthetic piece with minimal to no gains, or will it cost you power and be a $2000 paper weight...

ADDED: You would think the 70mm inlet would pair nicely with ported TB's and 2.75" intakes... would have to port match to a lower manny, but in theory it works?

warpeacelove · 02-10-2017, 10:09 AM

AAM Competition -Performance Intake Manifold

JARblue · 02-10-2017, 10:19 AM

I'm going for 2500 hp and 100 psi. I probably need this.

02-09-2017, 02:42 PM	#62 (permalink)
Hilla_killa Base Member Join Date: Oct 2016 Location: Connecticut Posts: 89 Drives: 13 370Z T/S/N 6mt Rep Power: 9	In for na dyno numbers! Alot of money to spend with no numbers given, especially after so long! Many of us are waiting for this! __________________ Fast Intentions 18", Forgestar, Project Kics, ZenClosures, Hebi Bebi, Ijdmtoy, Pilot Super Sports

02-09-2017, 03:59 PM	#63 (permalink)
Patrick@AAMComp Base Member Join Date: Sep 2014 Location: Maryland Posts: 160 Drives: with steering wheel Rep Power: 20	I wanted to provide you all with some additional background info concerning this project. We ran into some issues with the intake manifold, which took us some time to overcome. Many of these delays are attributed to the casting process. The first limited batch of intake manifolds we originally received for testing purposes were terribly inconsistent in terms of their fit and finish. They did not live up to AAM Competition’s quality standards. The cast manufacturer had told us that this particular mold was extremely difficult to work with. Our engineer made some minor adjustments to the CAD design of the manifold to make the casting process more efficient and accurate. In order to implement these changes, the manufacturer then had to create an entirely new mold. Once the new mold was completed, a new limited run of manifolds were put into production. After the revised manifolds had arrived, we could resume evaluating the units. These manifolds were MUCH more consistent, which definitely made our additional effort and investment worthwhile. During quality analysis, we quickly discovered that many of these intakes were not holding pressure. Ouch! ….. yet another hurdle to deal with. We promptly coordinated with the casting manufacturer to discuss this problem, ensure that a proper solution was put into place for production, and ordered yet ANOTHER set of intake manifolds. All of that said, we’ve FINALLY received a limited run of manifolds which are not plagued with the prior production faults. With this batch, we were able to further review and analyze the units as we intended them to be. Dyno testing on a high power, high boost twin turbo 370Z (the type of application we designed the manifold around) proved a peak gain of 36whp/34ft. lbs. in the midrange! We are very pleased with these results, and look forward to pushing the manifolds even harder to see how they perform. Although we do not anticipate significant gains for NA applications, we will be performing NA dyno testing as well. The AAM Competition VQ37 Performance Intake Manifold was specifically designed with high power forced induction in mind. For naturally aspirated vehicles, this will be primarily an aesthetic upgrade, with the added benefit of being much more durable than the OEM plastic manifold. I'll be sure to post these results here as soon as they are available. __________________ Luis R. aamcompetition.com

02-09-2017, 04:11 PM	#64 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	$55/hp? __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

02-09-2017, 05:36 PM	#67 (permalink)
James10694 Track Member Join Date: Oct 2013 Location: Las Vegas NV Posts: 917 Drives: 2010 370z Nismo Rep Power: 13	I admit this product is on higher side as far as pricing goes, however y'all don't seem to mind paying $1600 for a fast intentions exhaust system. What are the gains ~20-25whp after a tune? What is that $65 per horsepower. C'mon man. Don't even get me started on meisterschaft and armytrix... Don't get me wrong I love fast intentions and I myself own their exhaust and headers. P.S. I am no way defending AAM after their long term lack of communication. abm89 likes this. __________________ Boosted Performance Single Turbo 618whp/489 tq

02-09-2017, 05:48 PM	#68 (permalink)
YzGyz A True Z Fanatic Join Date: Jun 2013 Location: Houston Posts: 1,449 Drives: 2010 Nismo Rep Power: 63	I'm just shaking my head... So all those hoops they had to jump through, all valid and it takes this long to get a response? That's poopy. I bet they tested the"bad" ones too. Saw that they were poopier ACS didn't post it. Anyhow, not going to stir that. But very cool and good to know the have things done now. AAM are still on my "Never buy from" list unless they have a crazy stupid deal. It's not worth "saving $" if you never get the product... YzGyz __________________ http://www.the370z.com/members-370z-...gyzs-turn.html YzGyz

02-09-2017, 11:43 PM	#69 (permalink)
chuckie311 Enthusiast Member Join Date: Jul 2012 Location: las vegas Posts: 313 Drives: Q50/G37 Rep Power: 13	basically worthless if you are staying N/A __________________ Tuned by (Seb@Specialty-Z) 2011 G37 Cam'd FBO 347whp 280wtq Corn Fed 4.08 Gears Last edited by chuckie311; 02-10-2017 at 07:52 AM.

02-10-2017, 02:41 AM	#70 (permalink)
Z Runner Enthusiast Member Join Date: Sep 2015 Location: Puerto Rico Posts: 332 Drives: 2016 370Z KAD M Base Rep Power: 27	Wow the all new tread WHOOOOO pre sale take II Im just saying but i just browsed threw all 5 pages and see no real manifold images whats up? Whats the big secret? Can we have a looksy first its been a very very long time? Maybe few phone photos at list. Looks like corp. plan "B" in action

02-10-2017, 07:53 AM	#71 (permalink)
chuckie311 Enthusiast Member Join Date: Jul 2012 Location: las vegas Posts: 313 Drives: Q50/G37 Rep Power: 13	Go to there website plenty of pictures of it there __________________ Tuned by (Seb@Specialty-Z) 2011 G37 Cam'd FBO 347whp 280wtq Corn Fed 4.08 Gears

02-10-2017, 10:09 AM	#74 (permalink)
warpeacelove Enthusiast Member Join Date: Nov 2011 Location: NY Posts: 281 Drives: G37x GTM TT Rep Power: 14	AAM Competition -Performance Intake Manifold

02-10-2017, 10:19 AM	#75 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	I'm going for 2500 hp and 100 psi. I probably need this. warpeacelove and ChaseZ like this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Early Eater Egg- New AAM Competition 370Z/G37 Product!!	Sales@AAMComp	AAM Competition	3	01-16-2016 12:12 AM
NEW PRODUCT! AAM Competition Axleback Exhaust	Jerm@AAMComp	Intake/Exhaust	17	07-22-2014 01:18 AM
NEW PRODUCT! AAM Competition 370Z and G37 3" True Dual Exhaust System	Jerm@AAMComp	Intake/Exhaust	44	05-11-2014 05:09 PM
It's a little early but I'm thinking about which 370z should I get	andre12031948	Track / Autocross / Drifting / Dragstrip	17	10-27-2013 09:45 PM
How early is too early for synthetic?	IsaacSG31	Nissan 370Z General Discussions	29	05-31-2012 11:52 PM