Eps big bore TB's

Elmo370z · 01-11-2016, 12:52 AM

Im just waiting on a company to figure out the magic screws

MAMotorsports · 01-12-2016, 12:51 PM

Quote:

Originally Posted by Elmo370z

Im just waiting on a company to figure out the magic screws

We put a good amount of time into sorting out these heads and how they work. As we feel that unless you fully understand how an entire engine works, you should not be taking customers money to build them.

With knowledge based on years of engine development (From VVL SR20s, to taking over and evolving Menards Spec VK56 CORR motors and VK45 based daytona prototype and indy lights engines), we developed tooling to inspect, measure, and re-build these heads back to factory spec or maxing out the available adjustment otherwise. The tolerances of all the VVEL components have to be set to a high degree of precision outside the scope of a hobbyist's feasible budget as far as specialized tooling goes. There are specialized fixtures to measure every single component. We have also determined exact wear tolerances for all of the associated components and have documented all of the manufacturing differences from nissan's evolution of the design.

With all that said, there are still some issues with making adjustments. While we have solutions for racing applications utilizing different engine control hardware, we aren't ready to invest into something that is likely unmarketable for a more street based consumer. Time will tell as more and more people have been contacting us for more high end engine builds not limiting themselves to just forced induction and leaving the heads alone.

The issue does not lie with figuring out the "magic screw" as we have that sorted out, the issues lie with the lack of being able to control the throttling of the engine with the throttle bodies. Using the VVEL to throttle the engine by controlling the lift as the OEM ECU does becomes an issue when you increase the minimum lift via the adjustment.

We are very excited about the future of these engines, and very excited about the development we have undergone here with the VVEL system in itself. As the future unfolds, we look forward to what projects present themselves to us as we always enjoy a good challenge!

-Daelen
Ma-Motorsports
Daelen@ma-motorsports.com
410.593.7080

mag_black · 01-13-2016, 11:34 PM

$750 for 7hp/7tq? I realize that's peak, but IMO, I don't think it's worth it for me.

edit: Props to EPS for releasing a new product

Elmo370z · 01-20-2016, 06:17 PM

They will be testing the TB's with the aam manifold and rjm manifold soon as they get there hands on them

Carbon_z · 01-21-2016, 01:37 PM

are you changing anything out like butterflies or motor?

Elmo370z · 01-21-2016, 05:46 PM

I have a spare block.

Carbon_z · 01-22-2016, 12:06 PM

Quote:

Originally Posted by Elmo370z

I have a spare block.

not motor aka engine.. motors on throttle bodies.. The black area lol

ajcool2 · 02-09-2016, 04:52 PM

Anybody have first hand dynos with these yet?

gbrettin · 02-09-2016, 04:59 PM

I'm purchasing the TB's but will not have my car on the dyno until mid may, just before Zdayz.

Rusty · 02-09-2016, 05:20 PM

Sub'd.

Elmo370z · 02-10-2016, 12:40 AM

Quote:

Originally Posted by Carbon_z

not motor aka engine.. motors on throttle bodies.. The black area lol

WHatever the kits comes with or tells me to do, otherwise i'll just leave it as is

Elmo370z · 02-10-2016, 12:43 AM

Just signed up for the pre order

Elmo370z · 03-31-2016, 03:36 PM

Got my twin 70mm Tb's in the mail today. X mas came early

gbrettin · 03-31-2016, 03:39 PM

I received my 70mm TB'S in the mail today too. They are some big bad b1tches.

Sent from my SM-G930P using Tapatalk

Elmo370z · 03-31-2016, 03:42 PM

Hell yeah

01-13-2016, 11:34 PM	#33 (permalink)
mag_black A True Z Fanatic Join Date: Mar 2013 Location: Massachusetts Posts: 1,400 Drives: 09 370Z MT6 Rep Power: 666	$750 for 7hp/7tq? I realize that's peak, but IMO, I don't think it's worth it for me. edit: Props to EPS for releasing a new product Mysilverz likes this. __________________ fujimura ≠ abbeyRoadCompany ≠ fastIntentions ≠ motordyne ≠ avantGarde ≠ ecutek ≠ nismo ≠ stillen ≠ stoptech ≠ gtm ≠ spl ≠ carbonfiberelement ≠ stance™

01-20-2016, 06:17 PM	#34 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	They will be testing the TB's with the aam manifold and rjm manifold soon as they get there hands on them mag_black and wideglideleon like this.

01-21-2016, 01:37 PM	#35 (permalink)
Carbon_z A True Z Fanatic Join Date: Sep 2009 Location: Atlanta, GA Posts: 1,694 Drives: Carbon Fiber 370z Rep Power: 19	are you changing anything out like butterflies or motor? __________________ Full Carbon Fiber Nissan 370z "400zTT" Fully Built 4.0L Twin Turbo 1300hp, 1100whp. Follow me on Instagram at http://www.instagram.com/carbonz.

02-09-2016, 04:52 PM	#38 (permalink)
ajcool2 Base Member Join Date: Jul 2009 Location: Land of the Z's Posts: 162 Drives: 09 Touring Rep Power: 16	Anybody have first hand dynos with these yet? __________________ 09 Touring 12.33@113mph 338whp

02-09-2016, 05:20 PM	#40 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,190 Drives: 2011 Nismo GM 6M Rep Power: 2684437	Sub'd. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

01-11-2016, 12:52 AM	#31 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Im just waiting on a company to figure out the magic screws

01-21-2016, 05:46 PM	#36 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	I have a spare block.

02-09-2016, 04:59 PM	#39 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,282 Drives: Tricycle Rep Power: 589151	I'm purchasing the TB's but will not have my car on the dyno until mid may, just before Zdayz.

02-10-2016, 12:43 AM	#42 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Just signed up for the pre order

03-31-2016, 03:39 PM	#44 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,282 Drives: Tricycle Rep Power: 589151	I received my 70mm TB'S in the mail today too. They are some big bad b1tches. Sent from my SM-G930P using Tapatalk

03-31-2016, 03:42 PM	#45 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Hell yeah

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] JE Pistons 95.5mm Bore 10.0 comp	Nut_N_Much	Parts for sale (Private Classifieds)	7	02-11-2015 08:07 PM
[WTB] Lower intake manifolds! Uppers and TB's welcome!!	synolimit	Parts for sale (Private Classifieds)	0	11-19-2014 03:02 AM
Smokeys dyno, ported TB's, manifolds etc	synolimit	Tuning	8	08-15-2014 12:11 PM
who can bore out a tb?	edub370	Engine & Drivetrain	64	01-22-2014 04:09 AM