Eps big bore TB's

hooey_b · 01-08-2016, 04:49 PM

Just to throw this out there:

2009 Maxima 75mm throttle bodies plug right into the harness, no conversion clips needed. You just need to fabricate adapter plates to fit.

I was looking at doing this, but pulled the trigger on getting the 63mm ported tb's. ($280).

on a side note, having bigger TBs is definitely a plus.

V8Killer · 05-07-2016, 12:08 PM

So why is nobody talking about this?

Quote:

Originally Posted by hooey_b

Just to throw this out there:

2009 Maxima 75mm throttle bodies plug right into the harness, no conversion clips needed. You just need to fabricate adapter plates to fit.

I was looking at doing this, but pulled the trigger on getting the 63mm ported tb's. ($280).

on a side note, having bigger TBs is definitely a plus.

SS_Firehawk · 05-07-2016, 01:08 PM

Quote:

Originally Posted by V8Killer

So why is nobody talking about this?

Wouldn't you have to change the pins because we have a right side and left side TB? There is also an issue with the manifold TB inlet not being large enough, we would need a way to smooth that transition. 63 mm is as big as it's going to go on a stock ported upper.

andy_meng1024 · 06-01-2016, 07:39 AM

Quote:

Originally Posted by V8Killer

So why is nobody talking about this?

I have the JDM version 80mm TBs on my car. On the driver side it's plug and play. On the passenger side you need to re-wire everything.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] JE Pistons 95.5mm Bore 10.0 comp	Nut_N_Much	Parts for sale (Private Classifieds)	7	02-11-2015 07:07 PM
[WTB] Lower intake manifolds! Uppers and TB's welcome!!	synolimit	Parts for sale (Private Classifieds)	0	11-19-2014 02:02 AM
Smokeys dyno, ported TB's, manifolds etc	synolimit	Tuning	8	08-15-2014 11:11 AM
who can bore out a tb?	edub370	Engine & Drivetrain	64	01-22-2014 03:09 AM

01-08-2016, 04:49 PM	#1 (permalink)
hooey_b Base Member Join Date: May 2015 Location: Atlanta Posts: 126 Drives: 2008 G37S 6MT Rep Power: 10	Just to throw this out there: 2009 Maxima 75mm throttle bodies plug right into the harness, no conversion clips needed. You just need to fabricate adapter plates to fit. I was looking at doing this, but pulled the trigger on getting the 63mm ported tb's. ($280). on a side note, having bigger TBs is definitely a plus.