FI LTH.. when?

dainedazz · 12-08-2009, 08:09 PM

im glued to this again lol.. lets go!

kdo2milger · 12-08-2009, 08:15 PM

Quote:

Originally Posted by dainedazz

im glued to this again lol.. lets go!

lmao

how many days!!!

F.I. Inc. · 12-08-2009, 09:39 PM

Quote:

Originally Posted by kdo2milger

lmao

how many days!!!

Nice!

F.I. Inc. · 12-08-2009, 10:06 PM

UPDATE-

I just got back from the dyno. The car performed FAIR! It has the following:

-Stillen Gen III intakes
-F.I. high flow cats
-F.I. TDX cat back

Now, you cannot compare the numbers from July to the numbers tonight. Mainly due to the fact that the temperature is a difference of 26 degrees. July it was 85 degrees and tonight it was 59 degrees. The barometric pressure is relatively the same and the humidity is identical.

So here is how a dynojet works as in terms of measuring power and as far as correction methods.

SAE (Society of Automotive Engineers) is the standard norm of measurement in the automotive industry for just about everything. Now in the case of the Dynojet it takes in to account the elements:

-Temperature
-Barometric Pressure
-Humidity

It works off of an optimum temperature of 75 degrees Fahrenheit. If the temperature outside was at that along with the other elements being optimum, the dyno in SAE form would correct little to not at all.

Uncorrected is as simple as it sounds. It measures the horsepower and torque of the car without taking any elements in to consideration. If its hot out, the car will make what it makes and the dyno will not correct. If it is cold out, the car will make what it makes without the dyno correcting. We always go off of SAE when we advertise. Like I said, that is the standard norm in the industry.

Now, with all of that being said, we were able to make 304.12 RWH and 251.36 FT LBS of torque tonight in SAE.

Changed to UNCORRECTED those numbers jumped to: 307.19 RWH and 253.90 FT LBS of torque.

As you can see, converting it to SAE caused very little correction due to that in these conditions tonight, it was closer to optimum opposed to last July in the heat of the summer. But before we dyno the car with the headers, we are going back tomorrow to dyno it with the stock intakes. You can never do enough testing and I want to make sure everything is right the first time. I quite possibly might get to the dyno twice tomorrow. So if that is the case, I should have dyno numbers for the headers tomorrow night. If anyone has any questions, comments or concerns on what I just wrote or does not understand it, please speak up and ask me. This is what we are here for, to help and inform.

On another note, one of our competitors is taking jabs at us. (They must feel very threatened by us)! They stated that they include mid pipe resonators free of charge, so my question to all of you is, if you decide to go with their system and do not want resonators will they give you an additional discount? Or, are they just going to overcharge you even if you do not want the resonators. See what it really boils down to is there is no one here remotely close to being anything like us! We give you options because everyone is different and everyone wants something different. We manufacture our exhaust systems in house so we have the ability to give you more options and make changes or modifications based off of ideas or customer suggestions. Said my peace!

Thank you, Tony

RCZ · 12-08-2009, 10:21 PM

You don't have a dyno? how do you do testing on your exhausts??? How does one get "everything right the first time"?

Sorry that came off kinda rude, I'm not trying to question the quality of your exhausts but don't you need to tweak bends and such to get the most out of them?

F.I. Inc. · 12-08-2009, 10:29 PM

Quote:

Originally Posted by RCZ

You don't have a dyno? how do you do testing on your exhausts??? How does one get "everything right the first time"?

Sorry that came off kinda rude, I'm not trying to question the quality of your exhausts but don't you need to tweak bends and such to get the most out of them?

No need to apologize, we spent our money on a mandrel bender instead.

We have private labeled exhaust parts for a shop 5 minutes away from us for 10 years. They have a dynojet.

LiquidZ · 12-08-2009, 10:36 PM

Quote:

Originally Posted by F.I. Inc.

UPDATE-

I just got back from the dyno. The car performed FAIR! It has the following:

-Stillen Gen III intakes
-F.I. high flow cats
-F.I. TDX cat back

Now, you cannot compare the numbers from July to the numbers tonight. Mainly due to the fact that the temperature is a difference of 26 degrees. July it was 85 degrees and tonight it was 59 degrees. The barometric pressure is relatively the same and the humidity is identical.

So here is how a dynojet works as in terms of measuring power and as far as correction methods.

SAE (Society of Automotive Engineers) is the standard norm of measurement in the automotive industry for just about everything. Now in the case of the Dynojet it takes in to account the elements:

-Temperature
-Barometric Pressure
-Humidity

It works off of an optimum temperature of 75 degrees Fahrenheit. If the temperature outside was at that along with the other elements being optimum, the dyno in SAE form would correct little to not at all.

Uncorrected is as simple as it sounds. It measures the horsepower and torque of the car without taking any elements in to consideration. If its hot out, the car will make what it makes and the dyno will not correct. If it is cold out, the car will make what it makes without the dyno correcting. We always go off of SAE when we advertise. Like I said, that is the standard norm in the industry.

Now, with all of that being said, we were able to make 304.12 RWH and 251.36 FT LBS of torque tonight in SAE.

Changed to UNCORRECTED those numbers jumped to: 307.19 RWH and 253.90 FT LBS of torque.

As you can see, converting it to SAE caused very little correction due to that in these conditions tonight, it was closer to optimum opposed to last July in the heat of the summer. But before we dyno the car with the headers, we are going back tomorrow to dyno it with the stock intakes. You can never do enough testing and I want to make sure everything is right the first time. I quite possibly might get to the dyno twice tomorrow. So if that is the case, I should have dyno numbers for the headers tomorrow night. If anyone has any questions, comments or concerns on what I just wrote or does not understand it, please speak up and ask me. This is what we are here for, to help and inform.

On another note, one of our competitors is taking jabs at us. (They must feel very threatened by us)! They stated that they include mid pipe resonators free of charge, so my question to all of you is, if you decide to go with their system and do not want resonators will they give you an additional discount? Or, are they just going to overcharge you even if you do not want the resonators. See what it really boils down to is there is no one here remotely close to being anything like us! We give you options because everyone is different and everyone wants something different. We manufacture our exhaust systems in house so we have the ability to give you more options and make changes or modifications based off of ideas or customer suggestions. Said my peace!

Thank you, Tony

Thanks Tony! We look forward to seeing your product.

RCZ · 12-08-2009, 10:39 PM

OK cool, looking foward to the results/pics/vids.

kannibul · 12-08-2009, 11:15 PM

My priorities with this:

1) No CEL
2) Sound
3) Gains
4) Cost
5) PITA rating for DIY / no-lift install.

genki370z · 12-09-2009, 12:40 AM

speaking of no CEL, tony you mentioned you had some tricks up your sleeve to try and make sure the car would not throw a CEL, what exaclty did you do to try and prevent that on the prototype?? just curious!!

nixxer · 12-09-2009, 03:16 AM

Depending on how these LTs sound, which I'm sure will be amazing with the FI cbe, I'll be right in line for a set and for the cbe too. Can't wait to hear em!

shumby · 12-09-2009, 06:05 AM

Tony you have PM

dainedazz · 12-09-2009, 08:07 AM

okay lets go! i am in this EARLY! i have the same set up except on stock cats. cant wait for the results! im hype to HEAR these..

SOLISIMO · 12-09-2009, 03:42 PM

How can you have HFC's with LTH?

G37Sam · 12-09-2009, 03:45 PM

Solis he's getting rid of the HFCs to install Long Tubes

12-08-2009, 08:09 PM	#61 (permalink)
dainedazz A True Z Fanatic Join Date: Jan 2009 Location: NY, NJ, Philippines Posts: 1,325 Drives: 09' SR 6MT Z34 Rep Power: 293	im glued to this again lol.. lets go! __________________ DaineZ' Rosalena \| Kenwood \| Pioneer \| 3M \| 180 Custom \| Stillen \| Z1 \| Fast Intentions \| Setrab \| Eibach \| Varis \| UpRev \| TEIN \| UAM \| Amuse \| Bride \| Southbend \| WORK \| TWM \| BFGoodrich \| Robispec \| TAKATA \| GTSPEC \| *Instagram* @johndainez

12-08-2009, 10:06 PM	#64 (permalink)
F.I. Inc. The370Z.com Sponsor Join Date: Feb 2009 Location: Simi Valley, CA Posts: 2,989 Drives: 2010 GT-R/2007 F-250 Rep Power: 685	*UPDATE-* I just got back from the dyno. The car performed FAIR! It has the following: -Stillen Gen III intakes -F.I. high flow cats -F.I. TDX cat back Now, you cannot compare the numbers from July to the numbers tonight. Mainly due to the fact that the temperature is a difference of 26 degrees. July it was 85 degrees and tonight it was 59 degrees. The barometric pressure is relatively the same and the humidity is identical. So here is how a dynojet works as in terms of measuring power and as far as correction methods. SAE (Society of Automotive Engineers) is the standard norm of measurement in the automotive industry for just about everything. Now in the case of the Dynojet it takes in to account the elements: -Temperature -Barometric Pressure -Humidity It works off of an optimum temperature of 75 degrees Fahrenheit. If the temperature outside was at that along with the other elements being optimum, the dyno in SAE form would correct little to not at all. Uncorrected is as simple as it sounds. It measures the horsepower and torque of the car without taking any elements in to consideration. If its hot out, the car will make what it makes and the dyno will not correct. If it is cold out, the car will make what it makes without the dyno correcting. We always go off of SAE when we advertise. Like I said, that is the standard norm in the industry. Now, with all of that being said, we were able to make 304.12 RWH and 251.36 FT LBS of torque tonight in SAE. Changed to UNCORRECTED those numbers jumped to: 307.19 RWH and 253.90 FT LBS of torque. As you can see, converting it to SAE caused very little correction due to that in these conditions tonight, it was closer to optimum opposed to last July in the heat of the summer. But before we dyno the car with the headers, we are going back tomorrow to dyno it with the stock intakes. You can never do enough testing and I want to make sure everything is right the first time. I quite possibly might get to the dyno twice tomorrow. So if that is the case, I should have dyno numbers for the headers tomorrow night. If anyone has any questions, comments or concerns on what I just wrote or does not understand it, please speak up and ask me. This is what we are here for, to help and inform. On another note, one of our competitors is taking jabs at us. (They must feel very threatened by us)! They stated that they include mid pipe resonators free of charge, so my question to all of you is, if you decide to go with their system and do not want resonators will they give you an additional discount? Or, are they just going to overcharge you even if you do not want the resonators. See what it really boils down to is there is no one here remotely close to being anything like us! We give you options because everyone is different and everyone wants something different. We manufacture our exhaust systems in house so we have the ability to give you more options and make changes or modifications based off of ideas or customer suggestions. Said my peace! Thank you, Tony __________________ *Follow us on Facebook: Fast Intentions Inc.* Phone: (805) 522-FAST (3278) Email: tony@fastintentions.com www.fastintentions.com "FUELED BY PASSION"

12-08-2009, 10:21 PM	#65 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	You don't have a dyno? how do you do testing on your exhausts??? How does one get "everything right the first time"? Sorry that came off kinda rude, I'm not trying to question the quality of your exhausts but don't you need to tweak bends and such to get the most out of them? Last edited by RCZ; 12-08-2009 at 10:26 PM.

12-09-2009, 03:16 AM	#71 (permalink)
nixxer Base Member Join Date: Jul 2009 Location: Hawaii Posts: 163 Drives: Black 370z 6MT Sp/T Rep Power: 16	Depending on how these LTs sound, which I'm sure will be amazing with the FI cbe, I'll be right in line for a set and for the cbe too. Can't wait to hear em! Last edited by nixxer; 12-09-2009 at 03:20 AM.

12-09-2009, 06:05 AM	#72 (permalink)
shumby Captin Canuck Join Date: Dec 2008 Location: with your mom Age: 44 Posts: 6,288 Drives: your sister Rep Power: 236	Tony you have PM __________________ Originally Posted by SAM@GTM Engine detonation is not normal and it should never never happen, and whoever told that need to do something else for living . Sam

12-08-2009, 10:39 PM	#68 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	OK cool, looking foward to the results/pics/vids.

12-08-2009, 11:15 PM	#69 (permalink)
kannibul A True Z Fanatic Join Date: Jun 2009 Location: Jenks, OK Posts: 2,281 Drives: 370z Touring/Sport Rep Power: 267	My priorities with this: 1) No CEL 2) Sound 3) Gains 4) Cost 5) PITA rating for DIY / no-lift install.

12-09-2009, 12:40 AM	#70 (permalink)
genki370z Base Member Join Date: May 2009 Location: Lemoore,California Posts: 236 Drives: 2009 370z silver 6mt Rep Power: 289	speaking of no CEL, tony you mentioned you had some tricks up your sleeve to try and make sure the car would not throw a CEL, what exaclty did you do to try and prevent that on the prototype?? just curious!!

12-09-2009, 08:07 AM	#73 (permalink)
dainedazz A True Z Fanatic Join Date: Jan 2009 Location: NY, NJ, Philippines Posts: 1,325 Drives: 09' SR 6MT Z34 Rep Power: 293	okay lets go! i am in this EARLY! i have the same set up except on stock cats. cant wait for the results! im hype to HEAR these.. __________________ DaineZ' Rosalena \| Kenwood \| Pioneer \| 3M \| 180 Custom \| Stillen \| Z1 \| Fast Intentions \| Setrab \| Eibach \| Varis \| UpRev \| TEIN \| UAM \| Amuse \| Bride \| Southbend \| WORK \| TWM \| BFGoodrich \| Robispec \| TAKATA \| GTSPEC \| *Instagram* @johndainez

12-09-2009, 03:42 PM	#74 (permalink)
SOLISIMO Track Member Join Date: Apr 2009 Location: Florida Posts: 510 Drives: TOP SECRET G37S Rep Power: 17	How can you have HFC's with LTH? __________________ AUTOKITS-X CF GRILLE l INJEN CAI l STILLEN SWAYS l MXP EXHAUST l LE CF MIRRORS l SSR'S l HANKOOK'S l TS COILOVERS l TS BUMPER l TS DIFFUSER l TS SIDE SKIRTS l SEIBON CF TS HOOD l TS AEROCATCH l 3K HID FOGS l KICS R40'S l ILLUMINATED SILLS l GROUNDING KIT l VLEDS l

12-09-2009, 03:45 PM	#75 (permalink)
G37Sam A True Z Fanatic Join Date: Dec 2008 Location: Dubai, UAE Posts: 1,507 Drives: RB'd G37 Rep Power: 20	Solis he's getting rid of the HFCs to install Long Tubes __________________ '14 Viper GTS '08 RB'd G37S - Sold