What do we know about the z1 lower intake manifold?

Mysilverz · 12-28-2015, 09:44 PM

So today I spoke with Russ at Z1 and placed my order for the z1 power plenum and ported lower intake manifold with a new gasket for the mating surface between the lower intake manifold and the cylinder head. The following Sunday after they come in I will install both and dyno my car at the same dyno I've used in the past so we the 370 community can get a rough idea of the gains with this mod. Now my car already has a fast intentions cat back exhaust and stillen gen 3 intake. I may have a set of fast intentions test pipes on by then as well. I'm trying to get all these bolt on on the car before my ecutek tune on the 18th. I'll keep everyone posted.

ANMVQ · 12-29-2015, 10:48 AM

Nice man but I'm guessing maybe 5 WHP, the power band may move a little earlier in the RPM's.

An yes for what Chuckie said, those were ECUTEK tune VS UPREV.

vector7 · 12-30-2015, 02:35 AM

Quote:

Originally Posted by 2013nismo

Im installing both of these, and getting my first dyno on december 17th. I already have bolt ons though. So won't help much.

Any more updates on performance measurements before and after?

Mysilverz · 01-12-2016, 10:48 PM

So today I received an email from Z1 that my ported upper plenum and ported lower intake manifold shipped today and will be arriving tomorrow. I only live an hour and a half from Z1. Not this weekend but next weekend ill install everything, take pictures for a future DIY, and take her back to the dyno so that we will have a full story on these parts.

PharmDZ · 01-12-2016, 11:07 PM

Just switched from Motordyne M370 intake manifold, Injen Intakes to AAM Intakes, Z1 upper and lower intake manifold (plenty of other mods, nothing else changed though). Final numbers after tuning went from 331whp 269lb/ft to 337whp 268lb/ft. Supposedly lost a little mid-range with the bigger intake tubing? I dunno - car feels awesome, dyno graph definitely shows more power in the higher rev range, but the numbers were sort of disappointing. I'll post the graph sometime soon.

Mysilverz · 01-13-2016, 12:32 AM

I've been debating on keeping the stillen gen 3 or changing to the AAM intake. Yeah I've got the fast intentions CBE and stillen intake(dynoed @ 306whp) added fast intentions test pipes (dynoed 317whp). So now I'll add these parts and dyno after. This will all be followed by an ecutek tune. I'm not quite as worried about peak numbers, more just curious to see what changes and by how much.

370Z JT · 01-13-2016, 01:55 AM

Quote:

Originally Posted by PharmDZ

Just switched from Motordyne M370 intake manifold, Injen Intakes to AAM Intakes, Z1 upper and lower intake manifold (plenty of other mods, nothing else changed though). Final numbers after tuning went from 331whp 269lb/ft to 337whp 268lb/ft. Supposedly lost a little mid-range with the bigger intake tubing? I dunno - car feels awesome, dyno graph definitely shows more power in the higher rev range, but the numbers were sort of disappointing. I'll post the graph sometime soon.

Ever consider going with EcuTEK? I think you would hit 345-350 with it.

Mysilverz · 01-13-2016, 09:59 AM

Yeah ecutek is the route ill be going

PharmDZ · 01-13-2016, 10:06 AM

If I didn't have tuning software already, then maybe. I can't justify spending 600-900 bucks or whatever it'd cost on another 7 horsepower or so. Rather put it back into suspension/tires.

Mysilverz · 01-13-2016, 11:11 AM

So the parts just arrived. Ill post pics tonight. If anyone wants to see them now I just posted them on Z1's Facebook page under viewer's post.

ANMVQ · 01-13-2016, 12:50 PM

Quote:

Originally Posted by PharmDZ

Just switched from Motordyne M370 intake manifold, Injen Intakes to AAM Intakes, Z1 upper and lower intake manifold (plenty of other mods, nothing else changed though). Final numbers after tuning went from 331whp 269lb/ft to 337whp 268lb/ft. Supposedly lost a little mid-range with the bigger intake tubing? I dunno - car feels awesome, dyno graph definitely shows more power in the higher rev range, but the numbers were sort of disappointing. I'll post the graph sometime soon.

That TQ loss in the mid range is what you'll see in just the upper swap, That's what I saw when testing the M370 Vs. Z1, 5 WHP would be the lower porting.

Rusty · 01-16-2016, 08:03 AM

No can see.

Mysilverz · 01-16-2016, 12:11 PM

I know I'm having issues with posting photos from photo bucket. That's why I haven't posted the photos yet. So working on it.

Mysilverz · 01-21-2016, 03:55 PM

Mysilverz · 01-21-2016, 03:59 PM

12-28-2015, 09:44 PM	#31 (permalink)
Mysilverz Base Member Join Date: Jun 2015 Location: Birminham Al Posts: 205 Drives: 2013 370z silver M6 Rep Power: 10	So today I spoke with Russ at Z1 and placed my order for the z1 power plenum and ported lower intake manifold with a new gasket for the mating surface between the lower intake manifold and the cylinder head. The following Sunday after they come in I will install both and dyno my car at the same dyno I've used in the past so we the 370 community can get a rough idea of the gains with this mod. Now my car already has a fast intentions cat back exhaust and stillen gen 3 intake. I may have a set of fast intentions test pipes on by then as well. I'm trying to get all these bolt on on the car before my ecutek tune on the 18th. I'll keep everyone posted. 370Z JT, ANMVQ, Rusty and 4 others like this.

12-29-2015, 10:48 AM	#32 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	Nice man but I'm guessing maybe 5 WHP, the power band may move a little earlier in the RPM's. An yes for what Chuckie said, those were ECUTEK tune VS UPREV. Supmar85 likes this. __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

01-12-2016, 10:48 PM	#34 (permalink)
Mysilverz Base Member Join Date: Jun 2015 Location: Birminham Al Posts: 205 Drives: 2013 370z silver M6 Rep Power: 10	So today I received an email from Z1 that my ported upper plenum and ported lower intake manifold shipped today and will be arriving tomorrow. I only live an hour and a half from Z1. Not this weekend but next weekend ill install everything, take pictures for a future DIY, and take her back to the dyno so that we will have a full story on these parts. Rusty likes this.

01-13-2016, 12:32 AM	#36 (permalink)
Mysilverz Base Member Join Date: Jun 2015 Location: Birminham Al Posts: 205 Drives: 2013 370z silver M6 Rep Power: 10	I've been debating on keeping the stillen gen 3 or changing to the AAM intake. Yeah I've got the fast intentions CBE and stillen intake(dynoed @ 306whp) added fast intentions test pipes (dynoed 317whp). So now I'll add these parts and dyno after. This will all be followed by an ecutek tune. I'm not quite as worried about peak numbers, more just curious to see what changes and by how much. 370Z JT likes this.

01-13-2016, 09:59 AM	#38 (permalink)
Mysilverz Base Member Join Date: Jun 2015 Location: Birminham Al Posts: 205 Drives: 2013 370z silver M6 Rep Power: 10	Yeah ecutek is the route ill be going TBatt likes this.

01-12-2016, 11:07 PM	#35 (permalink)
PharmDZ Track Member Join Date: Jul 2012 Location: New Jersey Posts: 997 Drives: 11 Nissan 370Z BS M6 Rep Power: 14	Just switched from Motordyne M370 intake manifold, Injen Intakes to AAM Intakes, Z1 upper and lower intake manifold (plenty of other mods, nothing else changed though). Final numbers after tuning went from 331whp 269lb/ft to 337whp 268lb/ft. Supposedly lost a little mid-range with the bigger intake tubing? I dunno - car feels awesome, dyno graph definitely shows more power in the higher rev range, but the numbers were sort of disappointing. I'll post the graph sometime soon.

01-13-2016, 10:06 AM	#39 (permalink)
PharmDZ Track Member Join Date: Jul 2012 Location: New Jersey Posts: 997 Drives: 11 Nissan 370Z BS M6 Rep Power: 14	If I didn't have tuning software already, then maybe. I can't justify spending 600-900 bucks or whatever it'd cost on another 7 horsepower or so. Rather put it back into suspension/tires. ajcool2 likes this.

01-13-2016, 11:11 AM	#40 (permalink)
Mysilverz Base Member Join Date: Jun 2015 Location: Birminham Al Posts: 205 Drives: 2013 370z silver M6 Rep Power: 10	So the parts just arrived. Ill post pics tonight. If anyone wants to see them now I just posted them on Z1's Facebook page under viewer's post.

01-16-2016, 08:03 AM	#42 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,222 Drives: 2011 Nismo GM 6M Rep Power: 2684438	No can see. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

01-16-2016, 12:11 PM	#43 (permalink)
Mysilverz Base Member Join Date: Jun 2015 Location: Birminham Al Posts: 205 Drives: 2013 370z silver M6 Rep Power: 10	I know I'm having issues with posting photos from photo bucket. That's why I haven't posted the photos yet. So working on it.

01-21-2016, 03:55 PM	#44 (permalink)
Mysilverz Base Member Join Date: Jun 2015 Location: Birminham Al Posts: 205 Drives: 2013 370z silver M6 Rep Power: 10

01-21-2016, 03:59 PM	#45 (permalink)
Mysilverz Base Member Join Date: Jun 2015 Location: Birminham Al Posts: 205 Drives: 2013 370z silver M6 Rep Power: 10

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Ported Lower Manifold	Riptide67	Parts for sale (Private Classifieds)	18	03-06-2016 11:59 AM
Lower Intake Manifold Runner	Dragon_Ball_Z	Engine & Drivetrain	8	09-15-2015 09:19 PM
[WTB] Upper and Lower Intake Manifold (Stock)	Venom13132	Parts for sale (Private Classifieds)	5	06-17-2015 10:20 AM
Ported Lower Manifold @Synergy Composites	Trilitheum	Intake/Exhaust	18	04-22-2015 02:44 PM
[FOR SALE] OEM Lower Intake Manifold	Trilitheum	Parts for sale (Private Classifieds)	5	04-03-2015 02:40 PM