Custom intake manifold

EzDz · 10-15-2015, 01:02 PM

So I just got the word from my shop Moore Performance that they are working with an engineer and want to use my car as a test car for a custom intake manifold. Its in the early stages and the car wont get fitted until late winter but it is starting. The plan is cast aluminum for the manifold with the option to expand to a turbo setup. Ill probably get custom carbon fiber intakes made while its in there because the engineer loves the VQ and likes to work with carbon fiber. Subscribe and ill post info as I get it

FPenvy · 10-15-2015, 01:32 PM

Quote:

Originally Posted by EzDz

So I just got the word from my shop Moore Performance that they are working with an engineer and want to use my car as a test car for a custom intake manifold. Its in the early stages and the car wont get fitted until late winter but it is starting. The plan is cast aluminum for the manifold with the option to expand to a turbo setup. Ill probably get custom carbon fiber intakes made while its in there because the engineer loves the VQ and likes to work with carbon fiber. Subscribe and ill post info as I get it

.......where the hell has moore been hiding? they could have had mine for a test car years ago lol

thought they only played with subies and evos?

wtf?

EzDz · 10-15-2015, 01:46 PM

Quote:

Originally Posted by FPenvy

.......where the hell has moore been hiding? they could have had mine for a test car years ago lol

thought they only played with subies and evos?

wtf?

Haha they will work on anything if you ask. I took me sti down there and dropped $$$ for custon fabbed parts then a vw totaled it.... their engineer did work on the 350. They are in pittsburgh and 370's are like exotics up here lol so I told them I wanted to stay na and I guess they see a market for the kit.

FPenvy · 10-15-2015, 01:52 PM

Quote:

Originally Posted by EzDz

Haha they will work on anything if you ask. I took me sti down there and dropped $$$ for custon fabbed parts then a vw totaled it.... their engineer did work on the 350. They are in pittsburgh and 370's are like exotics up here lol so I told them I wanted to stay na and I guess they see a market for the kit.

I know who moore is. they bring a shop car out once in awhile to cars and coffee.

are you new to the area? or just new to a Z?

EzDz · 10-15-2015, 02:02 PM

Quote:

Originally Posted by FPenvy

I know who moore is. they bring a shop car out once in awhile to cars and coffee.

are you new to the area? or just new to a Z?

Like pittsburgh cars and coffee?! Ive lived in north pa my whole life, i brough my sti to starlight. Ive had my z for a month now

FPenvy · 10-15-2015, 02:09 PM

Quote:

Originally Posted by EzDz

Like pittsburgh cars and coffee?! Ive lived in north pa my whole life, i brough my sti to starlight. Ive had my z for a month now

yea Pittsburgh CnC Pittsburgh Cars 'N' Coffee - Index page

sadly our last regular meet was this past Saturday followed by a Kart outing. 10/31 we are doing a trunk or treat show at quaker steak in cranberry. basically small show where we put out bags of candy for kids and do a mini trick or treat thing.

it's very big and the Z is towards the bottom of the totem pole of what shows up lol.

I used to go once in a blue moon to starlite with my dad or the mustang club but didn't even make it out there this year.

EzDz · 10-15-2015, 02:12 PM

Quote:

Originally Posted by FPenvy

yea Pittsburgh CnC Pittsburgh Cars 'N' Coffee - Index page

sadly our last regular meet was this past Saturday followed by a Kart outing. 10/31 we are doing a trunk or treat show at quaker steak in cranberry. basically small show where we put out bags of candy for kids and do a mini trick or treat thing.

it's very big and the Z is towards the bottom of the totem pole of what shows up lol.

I used to go once in a blue moon to starlite with my dad or the mustang club but didn't even make it out there this year.

Im going to the garage meet this saturday in station square. Ill try to find the trunk or treat one too. I didnt know there were z's up here

FPenvy · 10-15-2015, 02:26 PM

Quote:

Originally Posted by EzDz

Im going to the garage meet this saturday in station square. Ill try to find the trunk or treat one too. I didnt know there were z's up here

a few of my buddies in the mustang club go to that garage one often. I still haven't gone there yet.

the regular cars and coffee is always a treat. there's some cars you'd never think to see in this area that come out. P1, F40, lambos galore, GT-R nismos, every flavor of Ferrari, etc...

check out the pics on the site or youtube Pittsburgh cars and coffee and a million vids come up. even had my Z featured on DoctaM3's channel lol

back on topic for a sec: let me know when moore makes some headway with the intake and CF pieces. if they look good and make some power I may have to buy it.

EzDz · 10-15-2015, 02:31 PM

Quote:

Originally Posted by FPenvy

a few of my buddies in the mustang club go to that garage one often. I still haven't gone there yet.

the regular cars and coffee is always a treat. there's some cars you'd never think to see in this area that come out. P1, F40, lambos galore, GT-R nismos, every flavor of Ferrari, etc...

check out the pics on the site or youtube Pittsburgh cars and coffee and a million vids come up. even had my Z featured on DoctaM3's channel lol

back on topic for a sec: let me know when moore makes some headway with the intake and CF pieces. if they look good and make some power I may have to buy it.

Hope to see you crusing sometime! I would like bigger throttle boddies so that is in the works. Im getting a stock baseline with injen cai soon. The car will be tuned by Mike at Innovative in Buffalo once its done. Ill post tons of progress pics and dynos

FPenvy · 10-15-2015, 03:10 PM

Quote:

Originally Posted by EzDz

Hope to see you crusing sometime! I would like bigger throttle boddies so that is in the works. Im getting a stock baseline with injen cai soon. The car will be tuned by Mike at Innovative in Buffalo once its done. Ill post tons of progress pics and dynos

with TB's your best bet is probably port and polish. not many if any options for larger TBs unless someone makes them for you.

make a build thread and keep us all up to date. welcome to the forum

here's some off-topic CnC vids for you.

( Click to show/hide )

Agent K · 10-16-2015, 11:03 PM

Quote:

Originally Posted by EzDz

So I just got the word from my shop Moore Performance that they are working with an engineer and want to use my car as a test car for a custom intake manifold. Its in the early stages and the car wont get fitted until late winter but it is starting. The plan is cast aluminum for the manifold with the option to expand to a turbo setup. Ill probably get custom carbon fiber intakes made while its in there because the engineer loves the VQ and likes to work with carbon fiber. Subscribe and ill post info as I get it

I've been waiting for a while for one of these to hit the market. Looks like I have to wait a little longer. I better start saving money for it.

FPenvy · 10-17-2015, 11:54 AM

Ezdz you going to the garage meet tonight?

EzDz · 10-17-2015, 03:11 PM

Quote:

Originally Posted by FPenvy

Ezdz you going to the garage meet tonight?

Yesszir ill be there, leaving to get there at 9

EzDz · 10-17-2015, 03:13 PM

Quote:

Originally Posted by Agent K

I've been waiting for a while for one of these to hit the market. Looks like I have to wait a little longer. I better start saving money for it.

They havnt disclosed a price for it yet but I just talked to him about price today. Looking like carbon fiber and red brushed steel for the manifold and custom strut bars for those interested, ill have i all put on mine

synolimit · 10-17-2015, 03:16 PM

Quote:

Originally Posted by EzDz

So I just got the word from my shop Moore Performance that they are working with an engineer and want to use my car as a test car for a custom intake manifold. Its in the early stages and the car wont get fitted until late winter but it is starting. The plan is cast aluminum for the manifold with the option to expand to a turbo setup. Ill probably get custom carbon fiber intakes made while its in there because the engineer loves the VQ and likes to work with carbon fiber. Subscribe and ill post info as I get it

This isn't the Moore in Columbus Ohio I take it?

10-15-2015, 01:02 PM	#1 (permalink)
EzDz Enthusiast Member Join Date: Aug 2015 Location: Pittsburgh Posts: 309 Drives: 2016 370z Nismo Tech Rep Power: 10	Custom intake manifold So I just got the word from my shop Moore Performance that they are working with an engineer and want to use my car as a test car for a custom intake manifold. Its in the early stages and the car wont get fitted until late winter but it is starting. The plan is cast aluminum for the manifold with the option to expand to a turbo setup. Ill probably get custom carbon fiber intakes made while its in there because the engineer loves the VQ and likes to work with carbon fiber. Subscribe and ill post info as I get it hooey_b likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] (BNIB) OEM Intake Manifold Gaskets///Exhaust Manifold Gaskets	BlkNismo	Parts for sale (Private Classifieds)	19	08-13-2016 01:01 PM
Custom intake setup -- Stillen G3's, Velocity Stacks, Custom Front Crash Beam, pics	'10Anamoly	Intake/Exhaust	26	02-14-2015 11:59 AM
Custom manifold/plenum/TBs	ViCiouS	Intake/Exhaust	40	11-25-2014 03:04 PM
z1 intake manifold	jamesj1996	Intake/Exhaust	2	10-02-2014 07:28 PM
[FOR SALE] OEM intake manifold	seymore4	Parts for sale (Private Classifieds)	5	02-24-2012 07:17 PM