I know this sounds lame, but need to know how to replace....

elm_tx · 10-09-2015, 08:51 PM

I have a 2010 Nismo with Gen 3 Stillen cold air intakes with K&N air filters, dealer installed back in early 2011. Car has 42k miles on it. I'm thinking it's about time to pull the filters off and clean/replace them.

However, I don't see an easy way to get to them. The installation videos I have seen show pulling the entire bumper off to install the Intakes.

Is that what I need to do to clean/replace the filters?
Anyone have any youtube or other links that explain the process?
I can pay the dealership to do it, but would prefer to do IT myself.

Thanks in advance!!!

(gotta laugh every time a get a form letter from a dealership that NEEDS to buy my 2010 NISM0... No Chance In HE11)

mag_black · 10-09-2015, 09:06 PM

You'll have to pull the front bumper. It's fairly easy. Just like you, I was scared the first time I did it, but I assure you, it's easy.

DIY: Front Bumper Removal

Rusty · 10-09-2015, 10:56 PM

Takes about 15 minutes to pull the front bumper. First time you're doing it. Take your time. Watch out for the fasteners by the headlights, in the fender. Also lay a rug under the bumper that you can lay the bumper on it.

Zbrah · 10-10-2015, 12:46 AM

I would also tape up along the edges of the head lights and fenders where your bumper might come in contact and scratch the car. Other than that it's an easy task. If you have the oiled type K&Ns, you'd need to pick up a bottle of intake cleaner and oil to clean the filter and re apply the oil. They sell the kit at autozone ~15 or so.

Rusty · 10-10-2015, 12:55 PM

Quote:

Originally Posted by Zbrah

I would also tape up along the edges of the head lights and fenders where your bumper might come in contact and scratch the car. Other than that it's an easy task. If you have the oiled type K&Ns, you'd need to pick up a bottle of intake cleaner and oil to clean the filter and re apply the oil. They sell the kit at autozone ~15 or so.

Yeah, it's called K&N Recharger Kit.

When you wash the filters. Let them dry completely. Don't use compressed air. You might tear a filter. Use a shop vac to remove the water.

Don't over oil the filters. Spray one even light coat of oil over them. Too much oil. And the oil will travel all the way to the throttle bodies.

elm_tx · 10-10-2015, 04:58 PM

Thanks Y'all, I appreciate the input. I'll take a swing at it in the next couple of weeks!!!

10-09-2015, 08:51 PM	#1 (permalink)
elm_tx Base Member Join Date: Aug 2010 Location: Houston Posts: 51 Drives: 2010 Nismo Rep Power: 15	I know this sounds lame, but need to know how to replace.... I have a 2010 Nismo with Gen 3 Stillen cold air intakes with K&N air filters, dealer installed back in early 2011. Car has 42k miles on it. I'm thinking it's about time to pull the filters off and clean/replace them. However, I don't see an easy way to get to them. The installation videos I have seen show pulling the entire bumper off to install the Intakes. Is that what I need to do to clean/replace the filters? Anyone have any youtube or other links that explain the process? I can pay the dealership to do it, but would prefer to do IT myself. Thanks in advance!!! (gotta laugh every time a get a form letter from a dealership that NEEDS to buy my 2010 NISM0... No Chance In HE11)

10-09-2015, 09:06 PM	#2 (permalink)
mag_black A True Z Fanatic Join Date: Mar 2013 Location: Massachusetts Posts: 1,400 Drives: 09 370Z MT6 Rep Power: 666	You'll have to pull the front bumper. It's fairly easy. Just like you, I was scared the first time I did it, but I assure you, it's easy. DIY: Front Bumper Removal Memphis370Z likes this. __________________ fujimura ≠ abbeyRoadCompany ≠ fastIntentions ≠ motordyne ≠ avantGarde ≠ ecutek ≠ nismo ≠ stillen ≠ stoptech ≠ gtm ≠ spl ≠ carbonfiberelement ≠ stance™

10-09-2015, 10:56 PM	#3 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,323 Drives: 2011 Nismo GM 6M Rep Power: 2684438	Takes about 15 minutes to pull the front bumper. First time you're doing it. Take your time. Watch out for the fasteners by the headlights, in the fender. Also lay a rug under the bumper that you can lay the bumper on it. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

10-10-2015, 12:46 AM	#4 (permalink)
Zbrah A True Z Fanatic Join Date: May 2013 Location: The370Z.com Posts: 4,956 Drives: 370Z Rep Power: 5452	I would also tape up along the edges of the head lights and fenders where your bumper might come in contact and scratch the car. Other than that it's an easy task. If you have the oiled type K&Ns, you'd need to pick up a bottle of intake cleaner and oil to clean the filter and re apply the oil. They sell the kit at autozone ~15 or so. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Key Hole Delete, Yay or Lame?	maggotcorps	Nissan 370Z General Discussions	25	05-17-2015 05:13 PM
Repair Tire and Replace Rears or Replace All?	Jason	Wheels & Tires	6	06-27-2012 10:28 PM
Lame music that sounds the same.	BanningZ	The Lounge (Off Topic)	3	09-15-2009 01:03 AM
Just a few lame pics	Chad	Nissan 370Z Photos / Spyshots / Video / Media Gallery	20	12-29-2008 06:18 PM

10-10-2015, 04:58 PM	#6 (permalink)
elm_tx Base Member Join Date: Aug 2010 Location: Houston Posts: 51 Drives: 2010 Nismo Rep Power: 15	Thanks Y'all, I appreciate the input. I'll take a swing at it in the next couple of weeks!!!