Akuma intake

MicntaeG35 · 09-16-2015, 10:31 PM

Idk if this is the right place to post this so if it's in the wrong place then mods please move. But on to the topic. Does anyone make an intake like the akuma anymore or is that something that I would need to get custom made? And also, having an intake with that size piping, would I need a bigger throttle body or are the stock throttle bodies big enough?

MicntaeG35 · 09-18-2015, 11:54 PM

Bump

Tigger · 09-20-2015, 11:50 AM

The Akuma intake is an awesome piece, indeed. Almost picked one up a couple of years ago. Sadly, this is pretty much a one-of-kind intake and not many have it.

If Presto ever gets off his *** and goes FI, you might be able to snatch his up.

On to your answer... No point in going large like that and having to get a tune to make it work unless you do it all the way. Larger throttle bodies would likely be a good decision. May not net you much in terms of power gains (if any at all) but response may be enhanced slightly. Small cost compared to the intakes (5-600 + $1,500 for tune and dyno + a few hundred for a throttle body).

I only say that because of the hassle of going large. If you don't want to deal with it (most don't) then get the G3s or the Nismo CAI.

Good luck!

FPenvy · 10-21-2015, 09:12 AM

I believe only 4 sets were ever made and I only know of 2 sets being still in existence.

I met the one guy with the other set this past year at zdayz

I do believe set 001 were destroyed in a wreck
I have set 002
and then the guy I met has 003 or 004.

and tigger even if I go boost these intakes would go up on the wall with my carbon fiber FI mufflers lol they're just beautiful and even more rare than pieces like the amuse titanium intakes

Tigger · 10-21-2015, 01:07 PM

Quote:

Originally Posted by FPenvy

I believe only 4 sets were ever made and I only know of 2 sets being still in existence.

I met the one guy with the other set this past year at zdayz

I do believe set 001 were destroyed in a wreck

I have set 002

and then the guy I met has 003 or 004.

and tigger even if I go boost these intakes would go up on the wall with my carbon fiber FI mufflers lol they're just beautiful and even more rare than pieces like the amuse titanium intakes

bwahahaha!! i'd do the same ****! They are pretty for sure!

The guy That was selling his awhile back was out in Cali. I might be able to find his screen name in some old pm's. might be five sets in total.

FPenvy · 10-21-2015, 01:33 PM

Quote:

Originally Posted by Tigger

bwahahaha!! i'd do the same ****! They are pretty for sure!

The guy That was selling his awhile back was out in Cali. I might be able to find his screen name in some old pm's. might be five sets in total.

Possibly. Technically mine is a prototype set bout numbered as 0002.

njobe89 · 10-21-2015, 02:27 PM

is this the intakes in question?

FPenvy · 10-21-2015, 03:27 PM

that would be my car lol why you creeping in my garage?

Tigger · 10-21-2015, 04:11 PM

yes but the really cool version had the wrinkle black powder coat. His are just prototypes. Not the "real deal."

FPenvy · 10-21-2015, 04:15 PM

Quote:

Originally Posted by Tigger

yes but the really cool version had the wrinkle black powder coat. His are just prototypes. Not the "real deal."

he had those custom powder coated himself.

I had spoken to mike the powder coater about color matching mine but I figured it would be too much smurf lol

Tigger · 10-21-2015, 04:28 PM

Quote:

Originally Posted by FPenvy

he had those custom powder coated himself.

I had spoken to mike the powder coater about color matching mine but I figured it would be too much smurf lol

lol. never too much smurf!

FPenvy · 10-21-2015, 04:33 PM

Quote:

Originally Posted by Tigger

lol. never too much smurf!

touché lol

SS_Firehawk · 10-21-2015, 06:24 PM

You can look at AAM intakes as an alternative. Just remove the maf sleeve when you get a tune.

Tigger · 10-21-2015, 06:55 PM

Quote:

Originally Posted by SS_Firehawk

You can look at AAM intakes as an alternative. Just remove the maf sleeve when you get a tune.

forgot about those! good idea!

MicntaeG35 · 10-21-2015, 09:42 PM

Ima have to look into that ^^

09-16-2015, 10:31 PM	#1 (permalink)
MicntaeG35 Enthusiast Member Join Date: May 2014 Location: Trussville, AL Posts: 470 Drives: 11 370z nismo #452 Rep Power: 11	Akuma intake Idk if this is the right place to post this so if it's in the wrong place then mods please move. But on to the topic. Does anyone make an intake like the akuma anymore or is that something that I would need to get custom made? And also, having an intake with that size piping, would I need a bigger throttle body or are the stock throttle bodies big enough? __________________ A wounded man shall say to his assailant "If I live, I will kill you. If I die, you are forgiven."

09-18-2015, 11:54 PM	#2 (permalink)
MicntaeG35 Enthusiast Member Join Date: May 2014 Location: Trussville, AL Posts: 470 Drives: 11 370z nismo #452 Rep Power: 11	Bump __________________ A wounded man shall say to his assailant "If I live, I will kill you. If I die, you are forgiven."

09-20-2015, 11:50 AM	#3 (permalink)
Tigger A True Z Fanatic Join Date: Mar 2013 Location: NM Posts: 8,063 Drives: Awedeeeeee Rep Power: 602	The Akuma intake is an awesome piece, indeed. Almost picked one up a couple of years ago. Sadly, this is pretty much a one-of-kind intake and not many have it. If Presto ever gets off his *** and goes FI, you might be able to snatch his up. On to your answer... No point in going large like that and having to get a tune to make it work unless you do it all the way. Larger throttle bodies would likely be a good decision. May not net you much in terms of power gains (if any at all) but response may be enhanced slightly. Small cost compared to the intakes (5-600 + $1,500 for tune and dyno + a few hundred for a throttle body). I only say that because of the hassle of going large. If you don't want to deal with it (most don't) then get the G3s or the Nismo CAI. Good luck! FPenvy likes this.

10-21-2015, 02:27 PM	#7 (permalink)
njobe89 A True Z Fanatic Join Date: May 2014 Location: Atlanta, GA Posts: 5,227 Drives: 2013 370z BS 6MT Rep Power: 174284	is this the intakes in question? __________________ 2 plus 2 times 2 = ? ... hint, it's not 8 Stillen CBE, Stillen Gen 3, TP's, Uprev tuned - 324whp/264tq

10-21-2015, 06:24 PM	#13 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7335	You can look at AAM intakes as an alternative. Just remove the maf sleeve when you get a tune. Tigger likes this. __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

10-21-2015, 04:11 PM	#9 (permalink)
Tigger A True Z Fanatic Join Date: Mar 2013 Location: NM Posts: 8,063 Drives: Awedeeeeee Rep Power: 602	yes but the really cool version had the wrinkle black powder coat. His are just prototypes. Not the "real deal."

10-21-2015, 09:42 PM	#15 (permalink)
MicntaeG35 Enthusiast Member Join Date: May 2014 Location: Trussville, AL Posts: 470 Drives: 11 370z nismo #452 Rep Power: 11	Ima have to look into that ^^ __________________ A wounded man shall say to his assailant "If I live, I will kill you. If I die, you are forgiven."

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Akuma Motorports 370z Intake	Kevin@AkumaMS	Intake/Exhaust	249	04-20-2016 01:08 PM
2010 Nismo Akuma Intake Installed	okczguy	Intake/Exhaust	37	08-01-2014 12:27 PM
[FOR SALE] Akuma Intake, Osiris Tuner	fryzia23	Parts for sale (Private Classifieds)	12	07-10-2013 12:52 PM
Akuma intake install/review	FPenvy	Intake/Exhaust	15	11-25-2012 04:33 PM
AKUMA Spec Rev 2 Intake Group Buy!!	Kevin@AkumaMS	Group Buys	14	07-15-2012 11:41 AM