370z Nismo Tomei Ground Clearance Issues?

P's_Z · 06-03-2015, 11:04 PM

Quote:

Originally Posted by nkryptd1

It's a single... I currently have the silencer in due to one of my neighbor's complaining about the noise =]

Wel that just sucks if you ask me...(by "suck" im actually refering to your neighbors)

Gilianz · 06-05-2015, 11:33 PM

Well, here's an update. I have installed the 370z Tomei and it sits way better than the 350z version (as expected). The downside to this is that I scrape everywhere and everything. Friend was riding his bike back behind me and said he just saw sparks fly while I was driving on a perfectly smooth surface.

nkryptd1 · 06-07-2015, 03:07 PM

Quote:

Originally Posted by Gilianz

Well, here's an update. I have installed the 370z Tomei and it sits way better than the 350z version (as expected). The downside to this is that I scrape everywhere and everything. Friend was riding his bike back behind me and said he just saw sparks fly while I was driving on a perfectly smooth surface.

Are you lowered at all? Or stock ride height?

abm89 · 06-08-2015, 09:17 AM

This is why I didn't go to the Z34 version.

Gilianz · 06-09-2015, 11:23 AM

Quote:

Originally Posted by abm89

This is why I didn't go to the Z34 version.

Yeah, I didn't think it would be that low but I fixed it... I just took a hose clamp and pulled the exhaust up. So far no scrapes! I will need some loctite to hold that screw in place so it doesn't loosen over time though.

Quote:

Are you lowered at all? Or stock ride height?

I am lowered on coilovers.

speedfreek · 06-09-2015, 11:33 AM

Quote:

Originally Posted by Gilianz

Yeah, I didn't think it would be that low but I fixed it... I just took a hose clamp and pulled the exhaust up. So far no scrapes! I will need some loctite to hold that screw in place so it doesn't loosen over time though.

I would like to see a picture of your setup in order to replicate it. I would like to quit scraping as well.

Gilianz · 06-09-2015, 11:58 AM

Quote:

Originally Posted by speedfreek

I would like to see a picture of your setup in order to replicate it. I would like to quit scraping as well.

Sure thing. I'll take a pic later today and edit this post later!

Edit: As promised

imjello · 07-25-2015, 11:23 PM

How much quieter is the exhaust with the silencer in it?

cranzy · 07-26-2015, 01:48 PM

I have the same issue. It sits way too low and I'm scraping like a mofo. My car is lowered 1 inch but I don't have coilovers =.=

Zbrah · 07-26-2015, 02:16 PM

Where can I find the oversized hose clamp?

imjello · 07-26-2015, 04:28 PM

Quote:

Originally Posted by cranzy

I have the same issue. It sits way too low and I'm scraping like a mofo. My car is lowered 1 inch but I don't have coilovers =.=

Which springs are you running?

cranzy · 07-26-2015, 05:50 PM

Quote:

Originally Posted by imjello

Which springs are you running?

Eibach in my case.

Sent from my SM-G920T using Tapatalk

Gilianz · 07-28-2015, 04:58 AM

Quote:

Originally Posted by imjello

How much quieter is the exhaust with the silencer in it?

It is still quite loud but noticeably more quiet. You will still turn heads and might get complaints but still slightly more quiet.

Quote:

Where can I find the oversized hose clamp?

I actually got these at Home Depot. They were like $2 so... relatively cheap fix although I wish they would have made the exhaust with this in mind instead of have it scrape the ground when lowered. I had higher expectations from Tomei.

Zbrah · 07-28-2015, 12:19 PM

Quote:

Originally Posted by Gilianz

It is still quite loud but noticeably more quiet. You will still turn heads and might get complaints but still slightly more quiet.

I actually got these at Home Depot. They were like $2 so... relatively cheap fix although I wish they would have made the exhaust with this in mind instead of have it scrape the ground when lowered. I had higher expectations from Tomei.

Okay, thanks! I had been looking all over for these but I guess I was looking at the wrong place

Gilianz · 07-28-2015, 03:09 PM

Quote:

Originally Posted by Zbrah

Okay, thanks! I had been looking all over for these but I guess I was looking at the wrong place

No problem! Hope it fixes the problem as it did mine to some extent. The only thing that I will say is that as you tighten it more the pipe near the y-pipe will touch the heat shield. Nothing major but you will hear the occasional rattling.

06-05-2015, 11:33 PM	#17 (permalink)
Gilianz Enthusiast Member Join Date: Dec 2011 Location: Salina Posts: 379 Drives: 11 370z MB Rep Power: 14	Well, here's an update. I have installed the 370z Tomei and it sits way better than the 350z version (as expected). The downside to this is that I scrape everywhere and everything. Friend was riding his bike back behind me and said he just saw sparks fly while I was driving on a perfectly smooth surface. speedfreek likes this. __________________ Takeda CAI : FI Resonated TP : Stillen UD Pulley

06-08-2015, 09:17 AM	#19 (permalink)
abm89 A True Z Fanatic Join Date: Feb 2013 Location: Austin, Texas Posts: 1,386 Drives: 11 370Z \| 24 EL450 Rep Power: 64763	This is why I didn't go to the Z34 version. __________________ Complete Parts List: https://github.com/abm89/ztouge-build

07-26-2015, 02:16 PM	#25 (permalink)
Zbrah A True Z Fanatic Join Date: May 2013 Location: The370Z.com Posts: 4,956 Drives: 370Z Rep Power: 5452	Where can I find the oversized hose clamp? __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fast Intentions Ground Clearance	Akmcmahon	Intake/Exhaust	7	09-09-2013 12:22 AM
Ground clearance - Nismo w/ FI exhaust	KingJoseph	Nismo 370Z	5	03-08-2013 02:37 AM
Amuse Kit ground clearance	omaragra	Exterior & Interior	15	10-14-2011 02:26 PM
ground clearance ??	Nism0370	Nismo 370Z	3	05-02-2011 03:26 PM
A question about the 370z's ground clearance.	Will3212	Nissan 370Z General Discussions	14	09-25-2009 10:21 AM

07-25-2015, 11:23 PM	#23 (permalink)
imjello Enthusiast Member Join Date: Nov 2014 Location: texas Posts: 285 Drives: F80 M3, S5 B9 Rep Power: 13	How much quieter is the exhaust with the silencer in it?

07-26-2015, 01:48 PM	#24 (permalink)
cranzy Base Member Join Date: Mar 2015 Location: Seattle Posts: 108 Drives: 370z Rep Power: 10	I have the same issue. It sits way too low and I'm scraping like a mofo. My car is lowered 1 inch but I don't have coilovers =.=