How much WHP you making on FI, AT?

FLUJOKE · 03-26-2015, 08:57 PM

Looking for someone with Fast intentions CBE, Fast Intentions LTH, Stillen Gen 3's, and Uprev tune on a Dynojet....oh and the biggest factor if you have all that...being Automatic Trans. Thank you....Just trying to gauge where I would be since everyone has this same setup on MT6.

Japanjay · 03-26-2015, 10:06 PM

You should clarify SAE or STD correction as well.

FLUJOKE · 03-26-2015, 10:43 PM

Hmmmm good point

Sent from my iPhone using Tapatalk

ANMVQ · 03-27-2015, 08:04 AM

You'll make 315 or so. I dont have headers but cold airs, HFC's and catback I made 300 WHP untuned on a G37X Coupe

FPenvy · 03-27-2015, 08:55 AM

when I got tuned I had FI TP, FI CBE, and Akuma long tube CAI, with a 7AT.

baseline with those parts was 309whp and post tune was 324whp.

I do believe AAM using dynojet. i'll look for my dyno sheet to confirm but i'm 90% positive it is.

12nismo · 03-27-2015, 09:45 AM

345whp with those mods plus manifold...manual though.

FPenvy · 03-27-2015, 09:49 AM

Quote:

Originally Posted by 12nismo

345whp with those mods plus manifold...manual though.

345WHP with intakes, exhaust, and a intake manifold?

was it on a Z1 dyno?

12nismo · 03-27-2015, 10:20 AM

...and pulleys...my bad, forgot to mention that. No not on z1's dyno, it was on a dynojet here in Houston.

FPenvy · 03-27-2015, 10:22 AM

Quote:

Originally Posted by 12nismo

...and pulleys...my bad, forgot to mention that. No not on z1's dyno, it was on a dynojet here in Houston.

nice. I was just curious which dyno it was on.

345 is just so much for just adding a ported intake manifold when not many at all have seen big gains from it. pulleys don't add much either.

12nismo · 03-27-2015, 10:24 AM

Just to clarify, that is with the F.I. LTH's as well.

JARblue · 03-27-2015, 10:24 AM

Quote:

Originally Posted by FLUJOKE

Looking for someone with Fast intentions CBE, Fast Intentions LTH, Stillen Gen 3's, and Uprev tune on a Dynojet....oh and the biggest factor if you have all that...being Automatic Trans. Thank you....Just trying to gauge where I would be since everyone has this same setup on MT6.

Ms. Pint is fairly close. Although I don't know whether she has the FI headers or another brand. Also, she is not running G3s; she runs Z1 post maf tubes and K&N filters. She has FI CBE, Uprev, and AT. But I don't think she's ever had a dyno run either.

jwick · 03-27-2015, 10:45 AM

Quote:

Originally Posted by 12nismo

...and pulleys...my bad, forgot to mention that. No not on z1's dyno, it was on a dynojet here in Houston.

JTran?

12nismo · 03-27-2015, 10:55 AM

Quote:

Originally Posted by jwick

JTran?

of course...Johnny does great work!

jwick · 03-27-2015, 11:15 AM

Quote:

Originally Posted by 12nismo

of course...Johnny does great work!

He does do that. All my tunes are from him.

FLUJOKE · 03-27-2015, 11:21 AM

Thought JTran was running a new version of a Mustang Dyno

Sent from my iPhone using Tapatalk

03-26-2015, 08:57 PM	#1 (permalink)
FLUJOKE Track Member Join Date: Apr 2012 Location: earth Posts: 770 Drives: car Rep Power: 2067	How much WHP you making on FI, AT? Looking for someone with Fast intentions CBE, Fast Intentions LTH, Stillen Gen 3's, and Uprev tune on a Dynojet....oh and the biggest factor if you have all that...being Automatic Trans. Thank you....Just trying to gauge where I would be since everyone has this same setup on MT6.

03-27-2015, 08:04 AM	#4 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	You'll make 315 or so. I dont have headers but cold airs, HFC's and catback I made 300 WHP untuned on a G37X Coupe __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

03-27-2015, 09:45 AM	#6 (permalink)
12nismo Base Member Join Date: Apr 2012 Location: Houston, TX Posts: 153 Drives: 2012 370z nismo Rep Power: 15	345whp with those mods plus manifold...manual though. __________________ nismo Z34 12 0209 JTran Motorsports//Stillen//Fast Intentions//EcuTek//Z1 Motorsports//Eibach//BRIDE //Zspeed//Carbon Signal//Houston Halos//Southbend//Whiteline//TWM//NonStopTuning//Doran Racing

03-27-2015, 10:20 AM	#8 (permalink)
12nismo Base Member Join Date: Apr 2012 Location: Houston, TX Posts: 153 Drives: 2012 370z nismo Rep Power: 15	...and pulleys...my bad, forgot to mention that. No not on z1's dyno, it was on a dynojet here in Houston. __________________ nismo Z34 12 0209 JTran Motorsports//Stillen//Fast Intentions//EcuTek//Z1 Motorsports//Eibach//BRIDE //Zspeed//Carbon Signal//Houston Halos//Southbend//Whiteline//TWM//NonStopTuning//Doran Racing

03-27-2015, 10:24 AM	#10 (permalink)
12nismo Base Member Join Date: Apr 2012 Location: Houston, TX Posts: 153 Drives: 2012 370z nismo Rep Power: 15	Just to clarify, that is with the F.I. LTH's as well. __________________ nismo Z34 12 0209 JTran Motorsports//Stillen//Fast Intentions//EcuTek//Z1 Motorsports//Eibach//BRIDE //Zspeed//Carbon Signal//Houston Halos//Southbend//Whiteline//TWM//NonStopTuning//Doran Racing

03-26-2015, 10:06 PM	#2 (permalink)
Japanjay Track Member Join Date: Mar 2012 Location: Puyallup Posts: 856 Drives: 09 Nissan 370z MB M6 Rep Power: 14	You should clarify SAE or STD correction as well.

03-26-2015, 10:43 PM	#3 (permalink)
FLUJOKE Track Member Join Date: Apr 2012 Location: earth Posts: 770 Drives: car Rep Power: 2067	Hmmmm good point Sent from my iPhone using Tapatalk

03-27-2015, 11:21 AM	#15 (permalink)
FLUJOKE Track Member Join Date: Apr 2012 Location: earth Posts: 770 Drives: car Rep Power: 2067	Thought JTran was running a new version of a Mustang Dyno Sent from my iPhone using Tapatalk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How much hp are u making?	FLUJOKE	Nissan 370Z Roadster (Convertible)	13	11-04-2013 06:57 PM
I'm making my own Lip Spoiler	VQinside	Exterior & Interior	16	12-26-2010 03:36 PM
anyone knows if HKS is making its supercharger?	sojirovskensi	Forced Induction	9	12-19-2010 12:09 AM
Hey, check out what I'm making...	Jordo!	Exterior & Interior	79	12-12-2010 10:56 PM
Making out in public	TongMan	The Lounge (Off Topic)	16	10-21-2010 08:13 PM