Racelogic Traction Control System

KaienZ34 · 01-23-2014, 10:54 PM

Quote:

Originally Posted by JMac88

I updated the 1st page with the following

Is there anything else that I may need for install?
You will need a few things:
-You will need a spool of wire, some buttconnectors, and crimpers.
-10k resistor
-L7805 regulator or a 12v to 5v converter. I have run the L7805 for years and it is a couple of bucks. you may have a 12v to 5v if you run aftermarket sensors.
-Its also recommended that you have a laptop for easy configuration, but is not required if you have the digital adjuster.
-Patch harness (370Z/G37 (VQ37VHR) ECU Wiring Harness)

You'll notice i took out the uprev, as misfire detection has not been a problem.

If you absolutely want a harness made, we might be able to work something out. Keep in mind that I can not give you a 100% plug and play harness as some of the wires get long (the ones going from the wheelsensors back to the main sensor for instanace). You will still need to tap into certain wires as well.

As for pricing I still need to confirm nothing has changed. I would say if you budgeted $2100 that it would be more then enough. That's if you want the no lift shift, digital adjuster, ect... the full load deal.

Here ya go.

fireman3361 · 01-23-2014, 11:18 PM

Quote:

Originally Posted by hjo1078

Dude i cant wait. And this traction control def sounds like it will keep me from killing myself in my car. Lol.

@fireman: i will def read this thread more thoroughly.

Sent from my iPhone using Tapatalk

lol its all good
I was using my phone with crappy signal or I would have looked around and found it for you.
This thread does have a lot of usual info, but the majority of it is in the first two post and the one above..... cant wait for this!

hjo1078 · 01-24-2014, 01:49 PM

so if we get the 5th person for the group buy, how long would it take for us to have these kits in our hands ? And also would this work for a 350z ?

fireman3361 · 01-24-2014, 05:04 PM

Quote:

Originally Posted by hjo1078

so if we get the 5th person for the group buy, how long would it take for us to have these kits in our hands ? And also would this work for a 350z ?

That's a jmac question lol

JMac88 · 01-24-2014, 05:19 PM

Quote:

Originally Posted by hjo1078

so if we get the 5th person for the group buy, how long would it take for us to have these kits in our hands ? And also would this work for a 350z ?

We would be looking at a week or so to get the units from Racelogic. They will not do drop shipping so they will all come to me. This kind of works out as I can put the sensors in your box and ship the sensors and the Racelogic at once. Will probably take another week to get from me to you, so hopefully it would be a 2-3 week turn around time.

I know there are 350 guys that have used this kit. Their wheelspeed sensors are the older analogue type if I am not mistaken. This means they should be able to hook the kit up right to their wheelspeed sensors without the converters we need. With that being said, I would research it on my350 just to be sure. While I am confident about this, I can not guaranty it.

edit* this guy is running the system on his stock wss (350z)
http://my350z.com/forum/engine-and-d...market-tc.html

hjo1078 · 01-24-2014, 05:27 PM

Lol i was trying to get a 350z to jump in the group buy but i guess it doesnt do us any good.

Sent from my iPhone using Tapatalk

JMac88 · 01-24-2014, 06:04 PM

Quote:

Originally Posted by hjo1078

Lol i was trying to get a 350z to jump in the group buy but i guess it doesn't do us any good.

Sent from my iPhone using Tapatalk

He would most defiantly benefit from the GB. He just would not need the special converters we do. He is technically more ahead then we are lol. This is just going off what I read there. He would be responsible for finding the 350 fsm and tapping the right wires thought.

edit: i can see how you got confused. I need to come up with a different name for the sensors. I will change it to converters lol

Keith1054 · 01-28-2014, 10:34 AM

Quote:

Originally Posted by JMac88

He would most defiantly benefit from the GB. He just would not need the special converters we do. He is technically more ahead then we are lol. This is just going off what I read there. He would be responsible for finding the 350 fsm and tapping the right wires thought.

edit: i can see how you got confused. I need to come up with a different name for the sensors. I will change it to converters lol

JMac88 - I am very interested to know more about the custom chips you designed to interface between the Nissan ABS sensors and the RLTC ECU. I sent you a PM with some questions. Hopefully I can buy a set from you so I can install my current RTLC on my new car.

Anyone on the fence about RLTC, it is awesome! It makes driving a higher powered car so much more enjoyable/controllable. Yes it is expensive, but it was the best single item I ever purchased for my M3.

hjo1078 · 01-28-2014, 11:18 AM

Quote:

Originally Posted by Keith1054

JMac88 - I am very interested to know more about the custom chips you designed to interface between the Nissan ABS sensors and the RLTC ECU. I sent you a PM with some questions. Hopefully I can buy a set from you so I can install my current RTLC on my new car.

Anyone on the fence about RLTC, it is awesome! It makes driving a higher powered car so much more enjoyable/controllable. Yes it is expensive, but it was the best single item I ever purchased for my M3.

hey keith if you jump in on this that makes 5 peope in for the custom chipset

JMac88 · 01-28-2014, 11:20 AM

updated post two with some old pictures i found. I will snap a few more of the chips installed

JMac88 · 01-28-2014, 11:20 AM

Quote:

Originally Posted by Keith1054

JMac88 - I am very interested to know more about the custom chips you designed to interface between the Nissan ABS sensors and the RLTC ECU. I sent you a PM with some questions. Hopefully I can buy a set from you so I can install my current RTLC on my new car.

Anyone on the fence about RLTC, it is awesome! It makes driving a higher powered car so much more enjoyable/controllable. Yes it is expensive, but it was the best single item I ever purchased for my M3.

i sent you a pm

hjo1078 · 01-28-2014, 01:06 PM

alright guys my payment is in =)

JMac88 · 02-02-2014, 04:09 PM

looks like we have 5 interested, still time to get in if your interested

Ron · 02-02-2014, 04:11 PM

Interested. But bad timing. Sub'd

andy_meng1024 · 02-14-2014, 02:03 AM

How good is this on a NA car on a race track?

01-28-2014, 11:20 AM	#115 (permalink)
JMac88 Enthusiast Member Join Date: Jun 2010 Location: Edmonton AB Posts: 416 Drives: 2010 PW 370z Rep Power: 15	updated post two with some old pictures i found. I will snap a few more of the chips installed __________________ Full Mod List

02-02-2014, 04:09 PM	#118 (permalink)
JMac88 Enthusiast Member Join Date: Jun 2010 Location: Edmonton AB Posts: 416 Drives: 2010 PW 370z Rep Power: 15	looks like we have 5 interested, still time to get in if your interested hjo1078 likes this. __________________ Full Mod List

02-02-2014, 04:11 PM	#119 (permalink)
Ron A True Z Fanatic Join Date: Oct 2010 Location: Houston, TX Posts: 3,009 Drives: TT '11 PW Nismo #113 Rep Power: 22	Interested. But bad timing. Sub'd __________________ 2011 Twin Turbo PW nismo #113 - My Journal - My TT Build Thread [ GTM GTX Stg2 TT \|\| HKS EVC6 \|\| Custom CarPC \|\| F.I 3'' TDX CBE \|\| SB 6puck clutch/ZSpeed CSC \|\| BC BR Coilovers \|\| SPC camber arms \|\| Work VSS-X \|\| Custom Headlights \|\| PW:JDM CF Covers \|\| Seibon CF Engine Cover ]

02-14-2014, 02:03 AM	#120 (permalink)
andy_meng1024 Premium Member Join Date: Nov 2009 Location: Taipei Posts: 233 Drives: 2012 370z Rep Power: 3381	How good is this on a NA car on a race track? __________________ Current: 2015 C200 / 2018 Cayenne / 2012 370z / 2012 C250 Coupe Gone: 2013 Cayenne / 2004 Cayenne S / 2003 SL55 AMG / 2008 C300 / 2006 350z / 2006 C280 4Matic

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Traction Control	joe370z	Australia/New Zealand	23	02-28-2021 08:27 PM
GTM Racelogic Traction control Review	Mr.Squeeze	Forced Induction	112	07-17-2013 11:26 AM
Traction control	bigZ	Nissan 370Z General Discussions	21	03-10-2011 12:17 AM
Traction Control	ZSPEED	Nissan 370Z General Discussions	10	06-03-2009 06:34 PM

01-24-2014, 01:49 PM	#108 (permalink)
hjo1078 Track Member Join Date: May 2011 Location: virginia Age: 46 Posts: 572 Drives: twin turbo 370z Rep Power: 5395	so if we get the 5th person for the group buy, how long would it take for us to have these kits in our hands ? And also would this work for a 350z ?

01-24-2014, 05:27 PM	#111 (permalink)
hjo1078 Track Member Join Date: May 2011 Location: virginia Age: 46 Posts: 572 Drives: twin turbo 370z Rep Power: 5395	Lol i was trying to get a 350z to jump in the group buy but i guess it doesnt do us any good. Sent from my iPhone using Tapatalk

01-28-2014, 01:06 PM	#117 (permalink)
hjo1078 Track Member Join Date: May 2011 Location: virginia Age: 46 Posts: 572 Drives: twin turbo 370z Rep Power: 5395	alright guys my payment is in =)