Nissan 370Z Forum - Racelogic Traction Control System

Nissan 370Z Forum (http://www.the370z.com/)

- Group Buys (http://www.the370z.com/group-buys/)

- - Racelogic Traction Control System (http://www.the370z.com/group-buys/68931-racelogic-traction-control-system.html)

Quote:

Originally Posted by JMac88 (Post 2426521)

Sorry I was away for a few days. The installation of the chips is simple. You have to cut the signal wire of the abs sensor, splice in a single chip for each sensor. For the two fronts, you remove the splash shields and tap in right after the sensor. The rears are easy and are tapped in the trunk. Then a single wire is ran from the chips to another small board near the race logic. 4 inputs from the sensor, 4 outputs to the racelogic, and a ground.

The 4 small chips are around the size of a dime. The main chip is roughly the size of two quarters.

Let me know what else you would like to know. If this goes through, I will make it very hard to not install correctly. I have wire colors, pictures, ect... but I am not going to make a manual if there is no intrest.

Sounds easy enough. :tup:

Quote:

Originally Posted by Mitco39 (Post 2427153)

This might help you guys figure out what you want to do. lol. Took the car down to Montana and it worked flawlessly and I tested it out quite a few times. Nothing like feeling it pull around turns while it does its thing. It just sticks and goes. For you FI guys notice how you can hear the turbo spool even before the car launches, two stage rev limiters are the best.

http://img.photobucket.com/albums/v2...pse07cdbe0.jpg

Very sweet! :excited:

So far we have one person in for sure. We are going to need more to get the chips mfg at a reasonable rate. Tell your fourm friends!

Quote:

Originally Posted by JMac88 (Post 2427773)

So far we have one person in for sure. We are going to need more to get the chips mfg at a reasonable rate. Tell your fourm friends!

Can you PM me an all in price including the digital display.

Bumping up, lets get some intrest

I am very interested in this, can you be a bit more specific as to what "chips" are required for intercepting the abs output?

There is a chip that you put at each wheel speed sensor to take the signal and break it off to send to another chip that you can mount near the racelogic. It is required on all the newer vehicles running the new style of abs sensors.

Mitch

Quote:

Originally Posted by dimsler (Post 2437582)

I am very interested in this, can you be a bit more specific as to what "chips" are required for intercepting the abs output?

The chips we had to have made to get the racelogic to communicate properly with the vehicles. They are custom made by a local shop and high quality. You will not be getting a hacked together breadboard.

Alright guys, my tt kit is almost done, and I'm itching for one of these Racelogic kits, is there a time line?

Well we have our minimum of two, and maybe 3 if gale decides to pull the trigger. My only worry with only two or three is we won't be able to get the chips into production. This means you'll have to pay a bit more as they will be done by hand. I'll call the shop tomorrow and see what they are going to charge and pm the 3 interested parties

Let me know when you're serious about ordering.

bump, any updates? still very interested and serious. How is the system running? if the group buy falls through I'd love to buy just the sensors.

I got a bunch of usage out of mine and it works flawlessly. Ife done probably 100 or so launches with it and id say 2-300 no lift shifts all work awesome. The no lift shift is probably my favorite part about the whole system, the 1-2 shift can be a bit tricky and I usually still let off on that shift, but everything else shifts smooth as butter.

Im sure James will chime in here shortly. :)

Quote:

Originally Posted by dimsler (Post 2475508)

bump, any updates? still very interested and serious. How is the system running? if the group buy falls through I'd love to buy just the sensors.

Same here. I would love for the GB to work out, but if not, I still want to move forward if possible.