GTM Performance Engineering: MHI Twin Turbo Kit Group Buy

Chuck33079 · 12-12-2013, 10:27 AM

Quote:

Originally Posted by Neo187H

So at this point is there any compensation or discount planned to appease all of us that paid well over five grand with an expected ship date that passed six months ago?

In addition to the free upgrade to the Garrett turbos if desired? Check the other thread. They are most definitely offering something.

Chuck33079 · 12-12-2013, 02:46 PM

Quote:

Originally Posted by Neo187H

Did I miss something that they have posted somewhere else? Also sent that to you in a PM but figured I'd post it here in case someone else had the answer.

This is all I have seen on their release page which certainly doesn't say free, though it wouldn't be the first time I've overlooked something in these now crazy long GTM threads.

Quote:

Originally Posted by Mike@GTM

UPDATE: First off, I apologize for the delay in getting the schedule up on the boards. Sam had to have an emergency brain surgery last Thursday. As some of you know, he had broken his leg a little while back. Unfortunately, a blood clot formed in his leg and traveled up to his brain which caused some serious neurological issues. Last week, his condition worsened and he ended up having to take a ride in the ambulance to the ICU. The surgery was a success and thankfully, Sam is alive and on the road to recovery. While he is healing, he is not able to be here 24/7 like he used to, so please bear with us as Sam gets better and back up to 100%.

Now, for some good news: as a reward for bearing with us for as long as many of you have, we are offering the Garrett ball bearing turbos as a no-cost upgrade to those that want some ball bearing goodness.

Normally, this would be quite a bit more expensive, but we are offering it to those that want to take advantage of it. For comparison purposes, the 16g is comparable to the GT2860RS turbos with a 0.64 A/R turbine housing. The 18g is similar in response to the GT2860RS with the 0.86 A/R turbine housing in terms of response, but the 18g has an advantage in power. That said, the stock engine is realistically only capable of sustaining up to ~630chp for a daily driven application. So, even though the 2860RS turbos with the 0.86 A/R turbine housings are “only” capable of 700chp and the 18g turbos are capable of 800chp, it’s a moot point on a stock engine. Now, if you are going to be running a built engine and want a turbo comparable to the 18g, then Garrett’s GT2871R with the 0.64 A/R turbine housing is the answer. That said, it is a significantly more expensive turbo and we simply cannot offer it as a free upgrade at this price point, but as a $400 upgrade.

We will be posting a schedule as soon as Sam and I have an opportunity to catch up on the expected delivery times from our suppliers.

G37sHKS · 12-12-2013, 02:47 PM

Yes you missed something,

GTM offered free upgrade to GT series Garret turbo.

The one quoted is about GTX.

Edit: someone beat me lol!

Dzel · 12-12-2013, 03:45 PM

Chuck is a quick one! Lol

Sent with TapAhoe

Neo187H · 12-12-2013, 04:18 PM

That he is, thanks again for the heads up.

Dzel · 12-12-2013, 04:31 PM

Quote:

Originally Posted by Neo187H

Thats what she said, thanks again for the heads up.

FIXED

rvbsanjose · 01-03-2014, 03:24 AM

Does GTM still respond to this thread or their PM? I haven't received a response yet from my email, a PM and now here...

GrooveStyle · 01-03-2014, 07:35 AM

I would just give them a call. That would probably be your best bet. They update and check the boards every once in a while but if you want quick answers I'd pick up the phone.

Dzel · 01-03-2014, 08:46 AM

Quote:

Originally Posted by rvbsanjose

Does GTM still respond to this thread or their PM? I haven't received a response yet from my email, a PM and now here...

No only time they respond to the thread is when myself, Spohn, or the administrators ask them to. Other than that your best bet would be to call. Email if you want but it might get lost in all the clutter.

Sent with TapAhoe

Dzel · 01-03-2014, 08:52 AM

True story.

Sent with TapAhoe

rvbsanjose · 01-03-2014, 01:13 PM

Wth how do you run a business with that philosophy? Thanks for the feedback guys!

Chuck33079 · 01-03-2014, 01:20 PM

Quote:

Originally Posted by rvbsanjose

Wth how do you run a business with that philosophy? Thanks for the feedback guys!

In their defense, I'd assume most of their customers would prefer that they are out in the shop trying to un **** this group buy than sitting in front of the computer.

In all seriousness, I've gotten Sam or Mike on the phone in two rings every time I've called.

Dzel · 01-03-2014, 01:24 PM

Yup this whole time that I was dealing with them Mike would always answer my questions when I called. There was only one time that I felt that they were giving me the run around.

Sent with TapAhoe

V1H · 01-09-2014, 05:55 AM

Srry for the dump question, is their direct Tel. +01 909 481-4300 ? I'd be calling from the U.K.
Mike/Sam would also not get back to me via forum, PM, email or any attempt to get in contact.

Cheers

conmam · 01-09-2014, 02:36 PM

Quote:

Originally Posted by V1H

Srry for the dump question, is their direct Tel. +01 909 481-4300 ? I'd be calling from the U.K.
Mike/Sam would also not get back to me via forum, PM, email or any attempt to get in contact.

Cheers

+01 909 481-4300 and +01 909 481-1401. Call about 9:00 PM GMT or a little later. Good luck.

12-12-2013, 02:47 PM	#348 (permalink)
G37sHKS A True Z Fanatic Join Date: Feb 2010 Location: Dubai Posts: 1,183 Drives: 09 G37S Coupe 7AT Rep Power: 20	Yes you missed something, GTM offered free upgrade to GT series Garret turbo. The one quoted is about GTX. Edit: someone beat me lol! Dzel likes this. __________________ G37 BUILD UNDER CONSTRUCTION

12-12-2013, 03:45 PM	#349 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 23	Chuck is a quick one! Lol Sent with TapAhoe __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

01-03-2014, 08:52 AM	#355 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 23	True story. Sent with TapAhoe __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

01-03-2014, 01:24 PM	#358 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 23	Yup this whole time that I was dealing with them Mike would always answer my questions when I called. There was only one time that I felt that they were giving me the run around. Sent with TapAhoe __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTM Performance Engineering: MHI Twin Turbo Official Release	SAM@GTM	Forced Induction	2872	02-12-2014 03:45 AM
GTM Performance Engineering: Mild 7 A/T Twin Turbo Build	SAM@GTM	Forced Induction	37	12-11-2013 01:23 PM
GTM Performance Engineering: 370Z MHI Twin Turbo Pre-Release	SAM@GTM	Forced Induction	120	09-06-2013 07:21 PM
GTM Performance Engineering: MHI Twin Turbo Kit Official Release	SAM@GTM	Drivetrain/Engine	26	04-17-2013 05:29 PM

12-12-2013, 04:18 PM	#350 (permalink)
Neo187H Enthusiast Member Join Date: Jan 2009 Location: Albany, NY Posts: 302 Drives: PW 370Z Rep Power: 16	That he is, thanks again for the heads up.

01-03-2014, 03:24 AM	#352 (permalink)
rvbsanjose Base Member Join Date: Jun 2013 Location: Newark, CA Posts: 86 Drives: 15 Nismo 370Z M6 Rep Power: 12	Does GTM still respond to this thread or their PM? I haven't received a response yet from my email, a PM and now here...

01-03-2014, 07:35 AM	#353 (permalink)
GrooveStyle Base Member Join Date: Sep 2011 Location: Waterloo, Iowa Posts: 230 Drives: '12 370z GM 6MT Rep Power: 14	I would just give them a call. That would probably be your best bet. They update and check the boards every once in a while but if you want quick answers I'd pick up the phone.

01-03-2014, 01:13 PM	#356 (permalink)
rvbsanjose Base Member Join Date: Jun 2013 Location: Newark, CA Posts: 86 Drives: 15 Nismo 370Z M6 Rep Power: 12	Wth how do you run a business with that philosophy? Thanks for the feedback guys!

01-09-2014, 05:55 AM	#359 (permalink)
V1H Base Member Join Date: Dec 2013 Location: United Kingdom Posts: 244 Drives: 2013 370Z-TT GT Edt Rep Power: 3366	Srry for the dump question, is their direct Tel. +01 909 481-4300 ? I'd be calling from the U.K. Mike/Sam would also not get back to me via forum, PM, email or any attempt to get in contact. Cheers