!Akuma Motorports Rev3 Intakes!

asdfsammich · 09-04-2012, 10:51 PM

Quote:

Originally Posted by XwChriswX

I don't really think they are limiting their market. I think they are hoping that people make an intelligent purchase and understand that some minute tweaks are needed to bring out the best from the mod.

Good point.

I wonder what's different in the design that makes them require vs just benefit from a tune, i.e. MAF table update.

XwChriswX · 09-04-2012, 10:57 PM

Quote:

Originally Posted by asdfsammich

Good point.

I wonder what's different in the design that makes them require vs just benefit from a tune, i.e. MAF table update.

It was mentioned a time or two mixed in with other posts I think... I'm not really sure what exact post to direct you to... Akuma would have to step in and answer that one...

Joepro · 09-04-2012, 11:09 PM

Quote:

Originally Posted by XwChriswX

I don't really think they are limiting their market. I think they are hoping that people make an intelligent purchase and understand that some minute tweaks are needed to bring out the best from the mod.

Well I guess time will tell, I like the design and the black looks great, this would be a no brainer, but I just do not see even 50% of Z modders waiting till a tune is going to happen before buying intakes or buying a cobb or cipher cable, maybe I am wrong, and for these guys I hope I am, I think this appears a quality product and I would buy it, but I can get the stillens and have proven gains with no tuning or map updates, or the new long tube taketas...not trying to be a downer, but I have a different business philosphy is all, I like the innovation and design!

XwChriswX · 09-04-2012, 11:18 PM

Quote:

Originally Posted by Joepro

Well I guess time will tell, I like the design and the black looks great, this would be a no brainer, but I just do not see even 50% of Z modders waiting till a tune is going to happen before buying intakes or buying a cobb or cipher cable, maybe I am wrong, and for these guys I hope I am, I think this appears a quality product and I would buy it, but I can get the stillens and have proven gains with no tuning or map updates, or the new long tube taketas...not trying to be a downer, but I have a different business philosphy is all, I like the innovation and design!

I don't think COBB is even making tuners anymore for 10+ Z's, I think they only did for 09, and have stopped. If you have one, I think it would work, but they haven't still made them. (Was the last info I had on COBBs)

Any Z modder looking to go for max performance will ultimately (if they're doing it right) get a tune at some point. So really, it's not that out of line with what the Average modder does. Sure, some don't get tunes, sure some get tunes and don't need them... It's all about what the modder is looking for and their intelligence base.

The beauty of this one is the fact that Akuma has already done the work of what your tuner would need to do making the tables, and are Giving them to you free, instead of adding an additional cost, (

to Akuma for that!) And you don't need a FULL tune to get this table installed. A simple flash will allow you to update these. Those generally go for $300~. So you don't have to spend all day on a dyno.

Granted, with Stillens, you don't need this... But with Stillens, you're looking at paying almost 2x as much vs the Akuma's... Not including Installation.

Lastly, the Takeda's have had several issues with delivery, and no definite dynos to prove the gains. With pricing still above the Akumas, and only one filter which potentially might help/hinder gains...

I'm not trying to be a fanboy (and I don't even think I could qualify since I don't have a set yet

) I'm just trying to give fair/balanced debate.

370Z Purist · 09-05-2012, 10:49 AM

Akuma's intake requires a revised table because it uses larger diameter piping and does not neck down at the MAF. The MAF will read differently and so the maps need to be adjusted. Larger diameter also means a bit more low end torque, which is better for a street car since prior CAI's see their best gains at the highest end of the powerband (think 6000+, a bit overkill for street driving).

Cobb did make an AccessPort for the 09, unfortunately, some drivers reported a lot of detonation and misfiring. Sometime early in 2010 Cobb completely dropped all support for the VQ37. People can still use the AccessPorts just like you'd use Osiris, but you don't get support from the manufacturer anymore.

I am looking forward to seeing these come out; unfortunately their release is not timed well for me. I'd have to sit on these intakes until I get around to buying Osiris anyway.

FPenvy · 09-05-2012, 10:57 AM

Quote:

Originally Posted by 370Z Purist

Akuma's intake requires a revised table because it uses larger diameter piping and does not neck down at the MAF. The MAF will read differently and so the maps need to be adjusted. Larger diameter also means a bit more low end torque, which is better for a street car since prior CAI's see their best gains at the highest end of the powerband (think 6000+, a bit overkill for street driving).

Cobb did make an AccessPort for the 09, unfortunately, some drivers reported a lot of detonation and misfiring. Sometime early in 2010 Cobb completely dropped all support for the VQ37. People can still use the AccessPorts just like you'd use Osiris, but you don't get support from the manufacturer anymore.

I am looking forward to seeing these come out; unfortunately their release is not timed well for me. I'd have to sit on these intakes until I get around to buying Osiris anyway.

i'm the opposite i've been sitting on my osiris tuner since january now waiting on the intakes lol

Kevin@AkumaMS · 09-05-2012, 11:02 AM

Please move this discussion to the intake thread as this is a group buy thread.

We at Akuma understand fully your concerns about these intakes but they are not meant to just slap on your car and call it a day. They are race proven, and dyno tested to be very durable and still efficient even with a whole lot of heat soak.

Yes they do require revised MAF tables but its something that can simply be done with the cable or the Osris Tuner or the access port (Cobb no longer supports the 370z)

We appreciate anyone who has stood by our product and for that we thank you.
We have done what we can to make a very reliable intake backed with great customer service!

Cheers!

FPenvy · 09-05-2012, 11:13 AM

Quote:

Originally Posted by Kevin@AkumaMS

Please move this discussion to the intake thread as this is a group buy thread.

We at Akuma understand fully your concerns about these intakes but they are not meant to just slap on your car and call it a day. They are race proven, and dyno tested to be very durable and still efficient even with a whole lot of heat soak.

Yes they do require revised MAF tables but its something that can simply be done with the cable or the Osris Tuner or the access port (Cobb no longer supports the 370z)

We appreciate anyone who has stood by our product and for that we thank you.
We have done what we can to make a very reliable intake backed with great customer service!

Cheers!

how close are we to having the number needed to start making the intakes?

cdoxp800 · 09-05-2012, 11:28 AM

Quote:

Originally Posted by FPenvy

how close are we to having the number needed to start making the intakes?

I talked with Kevin today. Looks like we are still awaiting people. I my just end up getting them to weld me up some since people just can not grasp the idea behind there intake system.

C

FPenvy · 09-05-2012, 11:32 AM

Quote:

Originally Posted by cdoxp800

I talked with Kevin today. Looks like we are still awaiting people. I my just end up getting them to weld me up some since people just can not grasp the idea behind there intake system.

C

i'm waiting as well. i'm on the list and since there is no rush since we are short people i was waiting til my next pay to send them the money. wanted to get ahead on a couple bills this last pay since i know we only had about 4 of the 8 needed to begin manufacturing. if Kevin is gonna make yours i got no problem sending him the cash and get mine as well.

cdoxp800 · 09-05-2012, 11:59 AM

Quote:

Originally Posted by FPenvy

i'm waiting as well. i'm on the list and since there is no rush since we are short people i was waiting til my next pay to send them the money. wanted to get ahead on a couple bills this last pay since i know we only had about 4 of the 8 needed to begin manufacturing. if Kevin is gonna make yours i got no problem sending him the cash and get mine as well.

Yea, they may build mine here soon. Trying to get them on before my Sep Track day and the Z-Nats. Trying to help get them out there.

FPenvy · 09-05-2012, 12:03 PM

Quote:

Originally Posted by cdoxp800

Yea, they may build mine here soon. Trying to get them on before my Sep Track day and the Z-Nats. Trying to help get them out there.

i was hoping the group buy would have happened faster and i would have had mine for my drag event this weekend lol not gonna happen but if they are making yours soon i'm gonna call and see if they wanna do mine as well.

cdoxp800 · 09-05-2012, 12:26 PM

Quote:

Originally Posted by FPenvy

i was hoping the group buy would have happened faster and i would have had mine for my drag event this weekend lol not gonna happen but if they are making yours soon i'm gonna call and see if they wanna do mine as well.

Yea, just call Kevin. He will take care of you. I really wish more people would get in on the GB. They still think Stillen is the S@#t. Stillen products to me are all over priced garbage.

FPenvy · 09-05-2012, 12:33 PM

Quote:

Originally Posted by cdoxp800

Yea, just call Kevin. He will take care of you. I really wish more people would get in on the GB. They still think Stillen is the S@#t. Stillen products to me are all over priced garbage.

i'll give kevin a call this week and get it all set since i guess i dont have to wait for everyone else now.

haitech · 09-05-2012, 04:40 PM

What's the price on the GB?

09-05-2012, 10:49 AM	#35 (permalink)
370Z Purist A True Z Fanatic Join Date: Jun 2009 Location: Zion, Illinois Posts: 1,873 Drives: '09 370Z-T BS M6 Rep Power: 19	Akuma's intake requires a revised table because it uses larger diameter piping and does not neck down at the MAF. The MAF will read differently and so the maps need to be adjusted. Larger diameter also means a bit more low end torque, which is better for a street car since prior CAI's see their best gains at the highest end of the powerband (think 6000+, a bit overkill for street driving). Cobb did make an AccessPort for the 09, unfortunately, some drivers reported a lot of detonation and misfiring. Sometime early in 2010 Cobb completely dropped all support for the VQ37. People can still use the AccessPorts just like you'd use Osiris, but you don't get support from the manufacturer anymore. I am looking forward to seeing these come out; unfortunately their release is not timed well for me. I'd have to sit on these intakes until I get around to buying Osiris anyway. __________________ -Phil "Since one of my brake light bulbs just went out, the forum told me that my piston rings are about to blow."

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Akuma Motorports 370z Intake	Kevin@AkumaMS	Intake/Exhaust	249	04-20-2016 01:08 PM
Akuma Motorsports	Kevin@AkumaMS	New Forum Member	1	05-19-2012 05:25 PM
GTM Motorports Installer in Melbourne?	GUTCH	Australia/New Zealand	7	07-19-2010 03:17 AM
GTM Motorports Website	GUTCH	Forced Induction	7	07-02-2010 10:57 AM
Akuma Z'ed - PG Z34	JunoonX	Member's 370Z Gallery	19	05-26-2009 07:15 PM

09-05-2012, 11:02 AM	#37 (permalink)
Kevin@AkumaMS Base Member Join Date: May 2012 Location: New Jersey Posts: 136 Drives: 01 Suby 2.5RS Rep Power: 13	Please move this discussion to the intake thread as this is a group buy thread. We at Akuma understand fully your concerns about these intakes but they are not meant to just slap on your car and call it a day. They are race proven, and dyno tested to be very durable and still efficient even with a whole lot of heat soak. Yes they do require revised MAF tables but its something that can simply be done with the cable or the Osris Tuner or the access port (Cobb no longer supports the 370z) We appreciate anyone who has stood by our product and for that we thank you. We have done what we can to make a very reliable intake backed with great customer service! Cheers!

09-05-2012, 04:40 PM	#45 (permalink)
haitech Track Member Join Date: Sep 2011 Location: Austin/Dallas Posts: 922 Drives: 11' 370z Magnetic M6 Rep Power: 15	What's the price on the GB?

!*Akuma Motorports Rev3 Intakes*!

!Akuma Motorports Rev3 Intakes!