Clutch Helper Spring (last chance)

ddanis60 · 08-05-2011, 07:43 AM

Quote:

Originally Posted by butdamnbrian

actually, guy posted on 7/26/11 that he had ten left due to people flaking out. we're checking to see if those are still available or not.

Vaughanabe13 · 08-05-2011, 11:35 AM

Quote:

Originally Posted by bluenoser

I just ordered one from Fastenal (p/n 0166722). It's the right size and the spring rate is about 25% of stock for anyone who missed out on the buy

Can anyone else confirm?

bluenoser · 08-05-2011, 01:57 PM

Quote:

Originally Posted by Vaughanabe13

Can anyone else confirm?

I'll post some pics when it arrives. The critical dimensions all match up though. The stock spring is about 230-250 lbs/in so the new 55 lbs/in spring should be similar to running without it.

Vaughanabe13 · 08-05-2011, 02:57 PM

Quote:

Originally Posted by bluenoser

I'll post some pics when it arrives. The critical dimensions all match up though. The stock spring is about 230-250 lbs/in so the new 55 lbs/in spring should be similar to running without it.

ok, please do!

LMBmikeZ · 08-06-2011, 12:39 PM

Hope this spring from fastenal works out! I have a connection at a local fastenal for me. I'll get him to look into prices for various quantities!

ZeeingAround · 08-06-2011, 02:32 PM

I received mine this week and took only about ten minutes to put it in. Just pulled the clip and pin off the bottom and pulled out the old spring and stuffed the new one in. A little play now upon initial depression, but pedal feel has improved.

bluenoser · 08-06-2011, 03:17 PM

Quote:

Originally Posted by LMBmikeZ

Hope this spring from fastenal works out! I have a connection at a local fastenal for me. I'll get him to look into prices for various quantities!

Actually, I'm looking at this again and I think the ID on the fastenal spring might be a little too tight where the hat and lower piston part sit inside.

I ordered 4 springs from Century Spring that are definitely the right size though so I'll have extras around. I should have just done that from the start but I didn't want to have to get more than one as Century has a minimum order size...

esfourteen · 08-06-2011, 05:14 PM

Quote:

Originally Posted by bluenoser

Actually, I'm looking at this again and I think the ID on the fastenal spring might be a little too tight where the hat and lower piston part sit inside.

I ordered 4 springs from Century Spring that are definitely the right size though so I'll have extras around. I should have just done that from the start but I didn't want to have to get more than one as Century has a minimum order size...

Thats pretty much the problem, most places want you to order a minimum quantity.

bluenoser, if you are planning on ordering extra springs and selling them to people, please do not use my threads. I would love to help everyone out and keep organizing these but I don't have much time at the moment and AK made it very clear that he did not want to do another group buy. I suppose his reasoning is that a normal forum user is not a business so he doesn't want the forums being held liable for selling parts or anything.

The company I got the spring from is called LeeSpring, this is the spring here:

Lee Spring

Ordering 1 spring from them directly is pretty retarded however, it costs about $18 + shipping + $20 surcharge for ordering below minimum quantity, hence why I organized the group buys.

I would suggest using the spring dimensions listed on the page and trying to find something that's close but doesn't require the same ordering restrictions.
Stock rate is about 330lb/in so this particular spring is about 75% softer.

These are the dimensions that matter for size:

Outside Diameter: 1.23"
Inside Diameter: 0.87"
Free Length: 2.4"

Anything that's close to this will be fine.

08-06-2011, 12:39 PM	#200 (permalink)
LMBmikeZ A True Z Fanatic Join Date: May 2010 Location: Ontario, Canada Posts: 12,237 Drives: 40th Rep Power: 10350	Hope this spring from fastenal works out! I have a connection at a local fastenal for me. I'll get him to look into prices for various quantities! __________________ CUSTOM NISMO \| BERK \| H&R \| STANCE \| SPL everything \| EVO-R \| 34 Setrab \| WHITELINE \| Redline \| Carkitcompany \| Zspeed \| UpRev \| SEIBON

08-06-2011, 02:32 PM	#201 (permalink)
ZeeingAround A True Z Fanatic Join Date: Dec 2010 Location: Michigan Posts: 6,365 Drives: 3500 NVP 370Z-sold! Rep Power: 86623	I received mine this week and took only about ten minutes to put it in. Just pulled the clip and pin off the bottom and pulled out the old spring and stuffed the new one in. A little play now upon initial depression, but pedal feel has improved. __________________ Get some roosters for eggs and Bulls for milk . Then you will see that gender matters. Especially at milking time.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Clutch pedal too soft/no feel? Remove the helper spring!	esfourteen	Engine & Drivetrain	560	12-31-2020 01:17 PM
Clutch Helper Spring	esfourteen	Group Buys	159	06-24-2011 07:30 PM
One in a million chance	zmyride	The Lounge (Off Topic)	13	11-17-2010 02:10 AM
Any chance for Concept G exhausts?	Stealth_Z	Intake/Exhaust	2	12-22-2009 05:51 PM
Had a chance to go to the Ring	miguez	Track / Autocross / Drifting / Dragstrip	0	05-06-2009 06:56 AM