Clutch Helper Spring (last chance)

eddieconfetti · 07-30-2011, 02:42 PM

i sent payment yesterday. when should i be expecting it? ty

SPOHN · 07-30-2011, 04:11 PM

Got mine installed today. So easy to do. So much love now. Feels just like my DD truck.

Dzel · 08-01-2011, 01:03 AM

Installed and test drove in the time of 20 minutes. Love the feel of it now I just have to find the right RPM to take off in when I'm at the strip

C09 · 08-02-2011, 01:07 AM

still get in on this?

butdamnbrian · 08-03-2011, 10:52 AM

pm sent .. just in case there are any more left by now

kholy · 08-03-2011, 11:42 AM

im also looking for one... pm me if you have avail

bluenoser · 08-04-2011, 12:36 AM

interested. still available??

bluenoser · 08-04-2011, 01:28 AM

Hey, I don't know where you're getting these springs but have you checked out this place? Compression Springs - Custom Springs | Lee Spring

They have a spring on there that matches the stock one very closely (p/n LHC 177N 03M) as well as various others that would fit at reduced spring rates.

I'm still interested if you have any of yours left. The leespring place is kind of pricey for very small orders

Vaughanabe13 · 08-04-2011, 09:39 AM

I'm also interested in the spring and PMed.

SPOHN · 08-04-2011, 12:23 PM

What a great mod. Really have had a great chance to enjoy it all week.

BrickyardZ · 08-04-2011, 12:40 PM

I am interested and sent you two PMs with no response. Please add me to the list.

Red__Zed · 08-04-2011, 12:41 PM

Quote:

Originally Posted by BrickyardZ

I am interested and sent you two PMs with no response. Please add me to the list.

Dude it is long over. You missed it.

Vapiano · 08-04-2011, 06:15 PM

Two things, the new spring works like a charm and I found a way to take the play out!

If you look at the top bump stop for the clutch pedal assembly, you will see a bracket above where the white bump stop rests, housed in this bracket is a black square module with a black pin sticking out of it. In front of that black square module is a lock nut (see attached pic). I used a 14mm open head wrench (not an exact fit, but it worked) to loosen, once this is done, you can turn the black square module to protrude further down in the bracket. Once this is done tighten the nut back up, no more play. I will say that this is a royal pain in the @$$, not much room at all.

1. Find the top bump stop bracket, loosen the nut in front of the black square module.

2. Disconnect attached wire to prevent the wire from "bunching".

3. Turn black square module, (I believe clockwise) it took me 2 full turns to get the play out.

3. Depress clutch pedal and reset against bump stop to ensure play is gone.

4. Repeat step 2 if necessary.

5. Tighten nut.

6. Take her for a spin and enjoy!

Please see pic of bracket assembly, this will get you on your way.

V.

butdamnbrian · 08-04-2011, 07:49 PM

Quote:

Originally Posted by Red__Zed

Dude it is long over. You missed it.

actually, guy posted on 7/26/11 that he had ten left due to people flaking out. we're checking to see if those are still available or not.

bluenoser · 08-05-2011, 02:26 AM

I just ordered one from Fastenal (p/n 0166722). It's the right size and the spring rate is about 25% of stock for anyone who missed out on the buy

07-30-2011, 04:11 PM	#182 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 46 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Got mine installed today. So easy to do. So much love now. Feels just like my DD truck. __________________

08-01-2011, 01:03 AM	#183 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 23	Installed and test drove in the time of 20 minutes. Love the feel of it now I just have to find the right RPM to take off in when I'm at the strip __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

08-03-2011, 10:52 AM	#185 (permalink)
butdamnbrian Enthusiast Member Join Date: Jul 2010 Location: bay area, ca Posts: 254 Drives: the ladies wild Rep Power: 15	pm sent .. just in case there are any more left by now __________________ Ex-Build:Alpine W910•Focal Polyglass 165 V30 6.5" Components•Stereo Integrity BM mk. 3•Zapco DSP6-SL•Arc Audio XDi Amps•Nissan Livina Rear Camera•Axxess•Spare Retained•

08-03-2011, 11:42 AM	#186 (permalink)
kholy Base Member Join Date: Aug 2010 Location: Ohio Posts: 218 Drives: 370z Sport Touring Rep Power: 15	im also looking for one... pm me if you have avail __________________ 2009 Pearl White 370z Sport Touring Edition

08-04-2011, 09:39 AM	#189 (permalink)
Vaughanabe13 Enthusiast Member Join Date: Jul 2011 Location: Iowa Posts: 387 Drives: 09 Nissan 370Z M6 Rep Power: 14	I'm also interested in the spring and PMed. __________________ 2009 Nissan 370Z Touring, w/sport, 6MT, chicane yellow/black.

07-30-2011, 02:42 PM	#181 (permalink)
eddieconfetti A True Z Fanatic Join Date: Jun 2009 Location: Duluth, GA Posts: 3,334 Drives: A Totaled PW Z Rep Power: 23	i sent payment yesterday. when should i be expecting it? ty

08-02-2011, 01:07 AM	#184 (permalink)
C09 Base Member Join Date: May 2011 Location: T.O. Posts: 119 Drives: 370Z 40th Rep Power: 14	still get in on this?

08-04-2011, 12:36 AM	#187 (permalink)
bluenoser Base Member Join Date: Jun 2011 Location: SF Bay Area Posts: 75 Drives: 11 370Z SP KAD 6MT Rep Power: 14	interested. still available??

08-04-2011, 01:28 AM	#188 (permalink)
bluenoser Base Member Join Date: Jun 2011 Location: SF Bay Area Posts: 75 Drives: 11 370Z SP KAD 6MT Rep Power: 14	Hey, I don't know where you're getting these springs but have you checked out this place? Compression Springs - Custom Springs \| Lee Spring They have a spring on there that matches the stock one very closely (p/n LHC 177N 03M) as well as various others that would fit at reduced spring rates. I'm still interested if you have any of yours left. The leespring place is kind of pricey for very small orders

08-04-2011, 12:23 PM	#190 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 46 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	What a great mod. Really have had a great chance to enjoy it all week. __________________

08-04-2011, 12:40 PM	#191 (permalink)
BrickyardZ Base Member Join Date: Oct 2010 Location: Cincinnati Posts: 123 Drives: 2010 40th Anniv Rep Power: 15	I am interested and sent you two PMs with no response. Please add me to the list.

08-05-2011, 02:26 AM	#195 (permalink)
bluenoser Base Member Join Date: Jun 2011 Location: SF Bay Area Posts: 75 Drives: 11 370Z SP KAD 6MT Rep Power: 14	I just ordered one from Fastenal (p/n 0166722). It's the right size and the spring rate is about 25% of stock for anyone who missed out on the buy

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Clutch pedal too soft/no feel? Remove the helper spring!	esfourteen	Engine & Drivetrain	560	12-31-2020 01:17 PM
Clutch Helper Spring	esfourteen	Group Buys	159	06-24-2011 07:30 PM
One in a million chance	zmyride	The Lounge (Off Topic)	13	11-17-2010 02:10 AM
Any chance for Concept G exhausts?	Stealth_Z	Intake/Exhaust	2	12-22-2009 05:51 PM
Had a chance to go to the Ring	miguez	Track / Autocross / Drifting / Dragstrip	0	05-06-2009 06:56 AM