Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Group Buys (http://www.the370z.com/group-buys/)
-   -   Piggy back ECU (http://www.the370z.com/group-buys/3492-piggy-back-ecu.html)

>135I 04-13-2009 08:15 PM

Piggy back ECU
 
I have been in contact with Marinus Kuyl from Unichip of North America Inc. and he has agreed to let us do a group buy for Unichip's soon to be released piggy back for the 370Z. I do not have all the info about the product yet but if you have questions leave there here or send me a PM and I'll be sure to find out the info for you. I will update this post as I get more info. Also if you have any other mods you would like them to map out for this piggy back let me know and I can see if they will map them out.

Unichip already makes a piggy back for the 350Z with dyno results, 19 hp and 20.4 torque gains.

350Z price: $755.10 + S&H
370Z price: unknown yet
370z group buy: About $520

350Z Features:

Plug n’ Play wiring harness with factory connectors - installs in under 20 minutes

Multi-processor computer for a new level of engine management

Custom-engineered software for only your engine with your specific performance components

Adds power to stock & modified engines - up to 30% more power

Works with a variety of cold air intakes, exhaust systems & other performance components

Dyno-tested and field-tested to ensure maximum reliability over the lifetime of your engine

Crafted to output power more smoothly, eliminating weak areas in the power curve

Safely maximizes engine power output across the entire RPM band

Does not permanently or temporarily alter factory computer software

Custom tunable by a Unichip Custom Tuner for custom components and the most power

No footprint - Invisible installation, easily removable

Performance Guaranteed to satisfy

Equal or better gas mileage - varies by application

No high-octane fuel requirements

One year factory warranty


Dyno results:

Cold Air
http://www.unichip.us/DynoPics/1000207.jpg

Exhaust
http://www.unichip.us/DynoPics/1000219.jpg

Cold Air & Exhaust
http://www.unichip.us/DynoPics/1000215.jpg

Cold Air, Exhaust & Headers
http://www.unichip.us/DynoPics/1000189.jpg

Minicobra1 04-14-2009 04:46 AM

yep, I would be interested, but depends on performance gains for the price.

bullitt5897 04-14-2009 11:10 AM

We need more info on the unit so we can compare its capabilities to those like it on the market. What are our advantages to this unit versus ______ brand and model.

:D

>135I 04-14-2009 04:30 PM

With Unichip you can switch between 5 different maps.
Immobilizer map
Valet map
High altitude option
Sea level option
Racing map

They also allow you to tailor your own mapping if you like, so say if you have kids want they want to borrow the car. You can make a map to limit the cars ability.

Another feature which is just about finished is the ability to switch maps with blue tooth. I mean that gives you the possibility to switch maps with a Smartphone.

Personally I like this feature the best the ability to take it out of the 370Z if you sell it, adjust the wiring harness remap the ECU and then put it into a different car.

I am still waiting for an email from Mr. Kuyl about how much the gains are a long with pricing.

Minicobra1 04-15-2009 01:47 AM

Those all sound like pretty great features ;)

>135I 04-15-2009 03:19 AM

Looks like price is going to be around $520 + S&H for group buy. 350z price was $755 + S&H

shabarivas 04-15-2009 04:21 PM

How would this compare to like a cobb AP?

>135I 04-15-2009 05:58 PM

Well after looking at the Cobb website one thing I didn't see listed was that it can't be used in another vehicle.I know with the Unichip if you sell your 370Z, all you have to do is adjust the wiring harness and download a new map and you can use the Unichip on different car or truck.

Also the Unichip is going to have a bluetooth function. Paired with a bluetooth windows mobile smart phone or PDA with their Flux Power Display software it does everything the Cobb does except it will be wireless, but if you do not have a Smartphone or PDA you can still plug in and set up the mapping.

Something else I just thought about with the Cobb, you are overwriting your ECU so if the Cobb breaks you can not reprogram your ECU back to factory settings until you get a new one. If the Unichip fries for some reason, all you do is unplug it and all your factory ECU settings are still there.

>135I 04-16-2009 12:11 PM

Hi Jake,

The bluetooth option (We call it FLUX) will definitive be available for the Z . We always offer it as a seperate option as FLUX needs to be "tuned" for each model : we have to enter vehicle weights etc. so that we can work the virtual dyno & all that .
It's quite cool , you get to do 0-60 & 0-100 times (with staging lights), terminal velocity , check & clear fault codes .

I'll have more on the kit in 2 weeks when we get our prototype harness & a test car.

Regards,

Marinus Kuyl.
Unichip of North America Inc.

ssqpolo 04-16-2009 12:19 PM

I am interested! If u guys are in Fl, u can test my car

>135I 04-16-2009 06:08 PM

Just telling everyone know I double checked to make sure and the FLUX option cost an extra $260.

>135I 04-16-2009 06:11 PM

Sorry they are located in OR.

scorpion90 04-24-2009 12:33 PM

Navi Models Only?
 
Quote:

Originally Posted by >135I (Post 56836)

Another feature which is just about finished is the ability to switch maps with blue tooth. I mean that gives you the possibility to switch maps with a Smartphone.

Blue tooth for navi models only?

>135I 04-24-2009 02:36 PM

I have blue booth to make calls in my 370Z, but I do not have a navi system.

Kyle@STILLEN 04-24-2009 04:47 PM

Just wanted to put a little more information out there.

Here are the installation instructions for the Unichip piggyback on the earlier 350Z's.
http://www.unichip.us/installation_i...ns/2340011.pdf

To install the COBB Access Port you simply plug the tuner into your OBDII port, select your tune, and your finished.

The COBB tuner CAN BE REMOVED AND RE-SOLD. When you plug the COBB tuner into your OBDII port you have to "install" the tune. This basically locks that access port controller to that particular car's VIN number. However, if you decide to sell the car and want to remove the Access Port that is 100% possible. You just have to hook up your controller and select the "un-install" option. This will remove all of the tuning and unlock the controller.

For more information please visit the following link and scroll to the bottom of the page. You will see a short video on how to remove the tuner from your vehicle.

CobbTuning.com - 350Z AccessPORT: '03-'06 VQ35DE Engine

The COBB tuner also allows you to read and diagnose trouble codes, data log your runs so you can pull vital tuning information, upload your datalogs to your computer and get email updates direct from COBB. You can track your performance of your car, 0-60 times, 1/4 mile times, and more.

Those are all features that are not possible with the Unichip.

Also, it looks like the COBB is about $50.00 less than the Unichip...

Now for the pro's on the Uni-chip:

Once the Unichip is removed it will not leave a "foot-print" on your factory ECU. Because it is a piggy-back unit all of the alterations are made after the signals come out of the ecu. Basically the car's factory ECU has no idea that the Uni-chip is even there.

It is difficult to make any assumptions on performance because there are no numbers out yet from Uni-chip.

Not trying to say anything negative about Uni-chip. I have no personal experience with their products, just pointing out some of the difference's I saw on both manufacturer's website's. Hope the information I have provided proves helpful to some member's of the forum!

>135I 04-28-2009 09:51 PM

Just wanted to give you guys an update. The protoype was suspose to come in today but due to a couple parts not showing up on time this couldnt happen but it should be coming very soon.

mspeasl 05-01-2009 09:31 PM

30% more power?
 
Quote:

Originally Posted by >135I (Post 56283)
I have been in contact with Marinus Kuyl from Unichip of North America Inc. and he has agreed to let us do a group buy for Unichip's soon to be released piggy back for the 370Z. I do not have all the info about the product yet

Unichip already makes a piggy back for the 350Z with dyno results, 19 hp and 20.4 torque gains.

350Z Features:

Adds power to stock & modified engines - up to 30% more power

No high-octane fuel requirements

One year factory warranty

"19 hp sure is a long ways from 30% more power"

Gang, I have a bridge in the Florida swamps that I'll sell real cheap also.
:bs:
Seeing is believing...........

>135I 05-02-2009 01:54 AM

I believe when they say up to 30% they are referring to getting that number with the add-ons so you might get 30% more with HFC, headers and catback exhaust. Not just gain 30% over stock.

Minicobra1 05-03-2009 01:02 PM

Quote:

Originally Posted by >135I (Post 66343)
I believe when they say up to 30% they are referring to getting that number with the add-ons so you might get 30% more with HFC, headers and catback exhaust. Not just gain 30% over stock.

because up to 6% just doesn't sound as good :tup: I'm not knocking it, just want real figures, I'm actually interested in this product.

>135I 05-05-2009 07:41 PM

Also those are the numbers from the 350Z. I am waiting for the numbers from the 370Z. I just emailed the guy and asked him when the new date is.

g96818 05-13-2009 03:28 AM

how much is shipping to our little rock? 370z spec yet?

ZYUL8R 05-13-2009 07:55 AM

Do they remove the speed limiter, and allow for rev limiter adjustments?

>135I 05-13-2009 01:34 PM

Checking on both questions.

Just got the email back.

Rev limiters are tricky . Apart from the fact that most engines don't make a stitch more power after the stock limiter it is something that could hold liability implications for us as a company so we rarely move limiters.

Liability implications are also there with the roadspeed limiter but we may move it up a bit with the 370.

CrownR426 07-15-2009 03:19 PM

What's up with this?

AK370Z 07-22-2009 02:53 AM

>135I, you must ask Mr. Kuyl to sign up here as a vendor to do a group buy once the product is ready. We have to be fair to our paying vendors. Thanks.

bigaudiofanat 07-22-2009 07:27 AM

Quote:

Originally Posted by Minicobra1 (Post 56562)
yep, I would be interested, but depends on performance gains for the price.

X2 I am interested and I don't even have a z yet:icon17:

FuszNissan 07-22-2009 09:58 AM

Quote:

Originally Posted by mspeasl (Post 66273)
"19 hp sure is a long ways from 30% more power"

Gang, I have a bridge in the Florida swamps that I'll sell real cheap also.
:bs:
Seeing is believing...........

That's the show me state!!!

Minicobra1 07-22-2009 10:10 AM

Where is the Unichip :confused: is it done yet?

vipor 10-03-2009 03:45 PM

Sounds like a good deal, although I don't know a whole lot about the ECUs available. I just remember the days of a Jim Wolf reflash or nothing, heh.

I'd love some more information on the capabilities and expected gains, both stock and slightly modified (intake, hkc, exhaust.)

docaam 11-04-2010 04:24 AM

what happened with UNICHIP anyone knows?

Jase 07-11-2012 08:53 PM

I can't find a unichip for it ? did they end up brining it out ?

KaienZ34 07-11-2012 09:19 PM

http://i1109.photobucket.com/albums/...Necromancy.jpg

arnoldas 10-15-2012 09:40 PM

price?


All times are GMT -5. The time now is 08:56 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2