Nissan 370Z Forum - GROUP BUY: Jim Wolf Technology C2 Cam set

Nissan 370Z Forum (http://www.the370z.com/)

- Group Buys (http://www.the370z.com/group-buys/)

- - GROUP BUY: Jim Wolf Technology C2 Cam set (http://www.the370z.com/group-buys/123241-group-buy-jim-wolf-technology-c2-cam-set.html)

GROUP BUY: Jim Wolf Technology C2 Cam set

MA-Motorsports Exclusive Product

http://www.ma-motorsports.com/wp-con...WTC2370Z-1.jpg

The all New Jim Wolf Technology exhaust camshafts for your VQ37VHR offer a 271 Degree Duration with 11.7mm of Max Lift. Jim Wolf Technology has produced these exhaust camshafts to increase mid-range torque as well as top end horsepower. With supporting modifications , these camshafts can add upwards of 36 peak Horsepower and 22ftlb of torque. Due to their well designed VVEL system, the intake camshaft is not necessary to upgrade.
Included in the Kit:
JWT Exhaust Camshaft (2)
JWT High RPM Valve Spring (12)
JWT Valve Spring Shim (12)
JWT Extended Cam Sprocket Bolts (2)
JWT Cam Sprocket Bolt Washer (2)
JWT Rear Camshaft Bolt (2)
JWT Cam Bolt Seal – Copper (2)

Dyno Graph showing the Before and After comparison on the camshaft install.

http://www.ma-motorsports.com/wp-con...2205604352.jpg

Dyno Graph showing the cam install Vs Stock 370Z

http://www.ma-motorsports.com/wp-con...2205576963.jpg

This group buy will be for 10 buyers, payment will be due once we have 10 people committed to order. If we are able to go over 10 quickly, I will look into better pricing at 20 sets.

Retail is $849 Shipped

Group buy price at 10 sets is $739 Shipped to the lower 48 states.

1. SRJ ---- PAID
2. Eddie Rivera. (FB) ---- PAID
3. sic6spd370z (Auh Ce FB)
4. Tommy D'Anna (FB) ---- PAID
5. Mark Kolosvary (FB) ---- PAID
6. ChrisRam
7. Carlos Aguilar (FB) ---- PAID
8. andy_meng1024 x2 ---- PAID
9. TOKSICK
10. Carbon
11. Jake J. x2 ---- PAID

PM me or Post here to add your name.

Thanks!

Oh man if I knew I could have saved 110$ I would have waited ��

Is there an option if you just want the camshafts? Lets say for those that already have the C1 cams and already have all the springs, shims, bolts, and what-not.

Quote:

Originally Posted by zer099 (Post 3685654)

Is there an option if you just want the camshafts? Lets say for those that already have the C1 cams and already have all the springs, shims, bolts, and what-not.

Shoot me a PM, we can work out an option for you!

-Daelen

Quote:

Originally Posted by chuckie311 (Post 3685574)

Oh man if I knew I could have saved 110$ I would have waited ��

Next time you need something let me know, ill try to help make up some of that!

-Daelen

No worries my parts are coming in pretty quick here so i might pull the trigger and get it done this year..

Quote:

Originally Posted by MAMotorsports (Post 3685688)

Next time you need something let me know, ill try to help make up some of that!

-Daelen

im waiting for a v1 and v2 comparison before i pull the trigger

i think its pretty clear by the dynos.. C1 cams make more TQ and C2 cams Make more Horsepower

numbers to compare too are still good to have

read through this thread numbers posted

http://www.the370z.com/engine-drivet...ts-inside.html

Broken down here
C1 cam
This car baselined at 298hp and 227tq (This was after an uprev tune, on a motor with a cat back and intake) after the cams the motor produced 309.5hp 258tq to the wheels. So the real star of this was the torque increase in the midrange as that is very noticeable when behind the wheel.

C2 cam
With a baseline power of 268whp and 219ftlb, and a final number of 305whp and 241ftlb the gains were very impressive.

Sadly we switched our dyno since we have last done a C1 set, im going to try and get a car in here to do a run with and have accurate info!

^taken from the thread

you wanted number to compare.. yes dynos are different so its a estimate between them.. either you want low in TQ or upper end HP

BUMP.

Our local customer with the C1 cams has not been able to stop by yet, but it is in the plans.