ATI Damper Group Buy from MA Motorsports

DEpointfive0 · 03-16-2016, 02:15 PM

Ok. So... My car doesn't help you. I changed too many mods at once, but I threw it on... It's there... Lol...

It's much heavier than stock, so I can't see it helping throttle response...

DEpointfive0 · 03-16-2016, 02:38 PM

Buckeye, is your idle that rough that you want this pulley instead?

Elmo370z · 03-22-2016, 01:38 AM

Quote:

Originally Posted by BuckeyeZ

Thanks derraj06. Anyone else have any experience to report?

Nope. improvements are to small to notice for me. But again i only have 40,000 miles on my 09

Rusty · 03-22-2016, 07:46 AM

Quote:

Originally Posted by Elmo370z

Nope. improvements are to small to notice for me. But again i only have 40,000 miles on my 09

But your crank and oil pump will thank you.

I'm still waiting for my foot to heal up before I install mine.

scope22 · 03-22-2016, 08:15 AM

Quote:

Originally Posted by BuckeyeZ

Thanks derraj06. Anyone else have any experience to report?

Seems a bit smoother but its not a "day and night" kindda thing...

andy_meng1024 · 03-22-2016, 11:22 AM

On my car with full aluminum engine mounts and transmission mount it is night and day difference. At least 80% of the vibration is gone. It's not that you can't notice it on a car with OE mounts, it's the rubber that absorbs most of it.

iPhone

BuckeyeZ · 03-23-2016, 06:32 PM

Quote:

Originally Posted by DEpointfive0

Buckeye, is your idle that rough that you want this pulley instead?

Nope. Idle on my car is great. I am running the Stillen lightweight pulley and was interested to know if changing pulleys was worth the investment.

I appreciate the feedback from everyone.

DEpointfive0 · 03-23-2016, 06:36 PM

Quote:

Originally Posted by BuckeyeZ

Nope. Idle on my car is great. I am running the Stillen lightweight pulley and was interested to know if changing pulleys was worth the investment.

I appreciate the feedback from everyone.

It's a hell of a lot heavier than OEM, sooooo... You'll be losing some throttle response, that's for sure

BuckeyeZ · 03-23-2016, 07:03 PM

Quote:

Originally Posted by DEpointfive0

It's a hell of a lot heavier than OEM, sooooo... You'll be losing some throttle response, that's for sure

Yep. That was my guess, but I was just asking to understand personal experiences.

I understand it is a trade-off of potential improved engine longevity versus lightweight pulley with improved throttle response. Since I am at 24k mi and driving a 2010, I will just stick with the lightweight pulley. Longevity should not be a problem for me!!

DEpointfive0 · 03-23-2016, 07:21 PM

I tell you. My car still rumbles to hell at stops (semi-solid mounts from the engine back on a 7AT don't mesh well) and it still rumbles to hell with the ATI pulley. Soooooo, didn't do a whole hell of a lot for me...

That said, I had the Stillen UD pulley, loved it, and I would've left it on... Maybe next time I'm bored I'll even throw it back on, lol. I've clocked a lot of miles with the Stillen pulley with no problems. I've had my engine out a couple times, compression tests, etc, no problems...

I don't want this to turn into a thread arguing lightweight vs dampened though.

DEpointfive0 · 03-23-2016, 07:21 PM

Oh, I think most of my vibration comes from the idle being too low as well. If I touch the gas while on the brakes, it's all gone

Elmo370z · 03-30-2016, 03:39 PM

Quote:

Originally Posted by BuckeyeZ

Yep. That was my guess, but I was just asking to understand personal experiences.

I understand it is a trade-off of potential improved engine longevity versus lightweight pulley with improved throttle response. Since I am at 24k mi and driving a 2010, I will just stick with the lightweight pulley. Longevity should not be a problem for me!!

You can fix that with tuning. Its not meant to give you HP that throws you in your seats. If you look at racing teams noone uses lightweight pulleys. They all use some type of harmonic damper.

PongSanity · 05-02-2016, 11:14 AM

Is there going to be another group buy for this?

MAMotorsports · 05-23-2016, 02:02 PM

I am pretty sure I am going to put together another group buy on these, is there enough interest for this?

-Daelen

MAMotorsports · 05-31-2016, 01:03 PM

ROUND 2

03-16-2016, 02:15 PM	#121 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	Ok. So... My car doesn't help you. I changed too many mods at once, but I threw it on... It's there... Lol... It's much heavier than stock, so I can't see it helping throttle response... __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language:

03-16-2016, 02:38 PM	#122 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	Buckeye, is your idle that rough that you want this pulley instead? __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language:

03-22-2016, 11:22 AM	#126 (permalink)
andy_meng1024 Premium Member Join Date: Nov 2009 Location: Taipei Posts: 233 Drives: 2012 370z Rep Power: 3382	On my car with full aluminum engine mounts and transmission mount it is night and day difference. At least 80% of the vibration is gone. It's not that you can't notice it on a car with OE mounts, it's the rubber that absorbs most of it. iPhone __________________ Current: 2015 C200 / 2018 Cayenne / 2012 370z / 2012 C250 Coupe Gone: 2013 Cayenne / 2004 Cayenne S / 2003 SL55 AMG / 2008 C300 / 2006 350z / 2006 C280 4Matic

03-23-2016, 07:21 PM	#130 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	I tell you. My car still rumbles to hell at stops (semi-solid mounts from the engine back on a 7AT don't mesh well) and it still rumbles to hell with the ATI pulley. Soooooo, didn't do a whole hell of a lot for me... That said, I had the Stillen UD pulley, loved it, and I would've left it on... Maybe next time I'm bored I'll even throw it back on, lol. I've clocked a lot of miles with the Stillen pulley with no problems. I've had my engine out a couple times, compression tests, etc, no problems... I don't want this to turn into a thread arguing lightweight vs dampened though. __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language:

03-23-2016, 07:21 PM	#131 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	Oh, I think most of my vibration comes from the idle being too low as well. If I touch the gas while on the brakes, it's all gone __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language:

05-02-2016, 11:14 AM	#133 (permalink)
PongSanity Enthusiast Member Join Date: Jul 2014 Location: Virgin Islands Posts: 261 Drives: '09 G37s KH3 6MT Rep Power: 11	Is there going to be another group buy for this?

05-23-2016, 02:02 PM	#134 (permalink)
MAMotorsports Track Member Join Date: Jul 2015 Location: Glen Arm, MD Posts: 872 Drives: 370Z Rep Power: 17	I am pretty sure I am going to put together another group buy on these, is there enough interest for this? -Daelen JARblue, zguynate and hooey_b like this. __________________ Daelen @ MA Motorsports MA-Motorsports.com https://www.facebook.com/pages/MA-Mo...C/125379858828

05-31-2016, 01:03 PM	#135 (permalink)
MAMotorsports Track Member Join Date: Jul 2015 Location: Glen Arm, MD Posts: 872 Drives: 370Z Rep Power: 17	ROUND 2 __________________ Daelen @ MA Motorsports MA-Motorsports.com https://www.facebook.com/pages/MA-Mo...C/125379858828

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
MA Motorsports Bolt in harness bar Group Buy!	MAMotorsports	Group Buys	49	06-02-2016 04:32 PM
Z1 Motorsports Thermostatic Sandwich Plate kit (For Nissan Motorsports Oil Cooler)	Dustin@Z1	Drivetrain/Engine	3	06-08-2012 12:10 PM
[Showroom Motorsports] Rennen Forged Group Buy	Showroom Motorsports	Group Buys	3	06-08-2011 03:51 PM
Z1 Motorsports Thermostatic Sandwich Plate kit (For Nissan Motorsports Oil Cooler)	Dustin@Z1	Z1 Motorsports	0	08-06-2010 12:26 PM