MA Motorsports Bolt in harness bar Group Buy!

TerribleONE · 08-05-2015, 10:24 AM

Highly doubt the stock belts will work as it looks like this mounts to the original belt location. If my plan for a half cage with a local builder doesn't work out, I will take one.

MAMotorsports · 08-05-2015, 10:37 AM

Quote:

Originally Posted by JARblue

sub'd to see if the stock belt ends up working

I will let you know

Quote:

Originally Posted by TerribleONE

Highly doubt the stock belts will work as it looks like this mounts to the original belt location. If my plan for a half cage with a local builder doesn't work out, I will take one.

Since the interest is there, and stock belts seem to be a big factor. We are going to look into making changes if need be to make it work with stock belts. So, if that is anyone's only hindrance we should be able to fix that!

AntiVenom · 08-05-2015, 11:36 AM

Quote:

Originally Posted by MAMotorsports

It really depends, I know of many customers that just use their harnesses at all times now. But, I am more than willing to see if we can make this work with stock belts also.

I´ve done it. That´s how I know it sucks.

I am going the 4point roll cage route. So you can ignore my comment. This seems like a good option for anybody doing autoX, wants harnesses in their street car, etc.

glad you guys are on here and innovating/creating new stuff for the Z.

MAMotorsports · 08-05-2015, 12:04 PM

Quote:

Originally Posted by AntiVenom

I´ve done it. That´s how I know it sucks.

I am going the 4point roll cage route. So you can ignore my comment. This seems like a good option for anybody doing autoX, wants harnesses in their street car, etc.

glad you guys are on here and innovating/creating new stuff for the Z.

I cant argue haha

Do you know what cage you are going with?

Thanks man, I am here to help!

AntiVenom · 08-05-2015, 01:18 PM

Quote:

Originally Posted by MAMotorsports

I cant argue haha

Do you know what cage you are going with?

Thanks man, I am here to help!

I guess at this point I am thinking of going custom. I haven´t decided on a shop yet, but there are a few in the NC area that seem to have good reps. Heck you guys are only 5-6 hours away. Wouldn´t be out of the question to have you guys do it.

I looked at the autopower and RPM versions and wasn´t convinced. I think there is room in the market for a good SCCA/NASA roll cage. IIRC there was a thread running around some months ago on the subject. Not sure it ever came to maturity though.

Carbon_z · 08-05-2015, 02:15 PM

Certain State laws require there to be a seat belt in use on highways, not harness. Just incase we need to strap on the seat belt

MAMotorsports · 08-05-2015, 02:20 PM

Quote:

Originally Posted by AntiVenom

I guess at this point I am thinking of going custom. I haven´t decided on a shop yet, but there are a few in the NC area that seem to have good reps. Heck you guys are only 5-6 hours away. Wouldn´t be out of the question to have you guys do it.

I looked at the autopower and RPM versions and wasn´t convinced. I think there is room in the market for a good SCCA/NASA roll cage. IIRC there was a thread running around some months ago on the subject. Not sure it ever came to maturity though.

We would be more than happy to work with you on a cage! Feel free to PM me if you have any specific questions.

For all of you talking about going the cage, what are your thoughts on interior? Are you looking to keep it? remove it? We normally prefer the least amount of interior possible as it allows us to build a stronger and safer cage, but I want to hear peoples thoughts on this also.

-Daelen

MAMotorsports · 08-06-2015, 11:59 AM

So we checked with some parts we had around the shop, current bar is a no go with seat belts.

I should have a car up here very soon to mock up a new bar, so for anyone that was on the fence but needed stock belts. That will be fixed very soon.

AntiVenom · 08-08-2015, 01:00 PM

Quote:

Originally Posted by MAMotorsports

We would be more than happy to work with you on a cage! Feel free to PM me if you have any specific questions.

For all of you talking about going the cage, what are your thoughts on interior? Are you looking to keep it? remove it? We normally prefer the least amount of interior possible as it allows us to build a stronger and safer cage, but I want to hear peoples thoughts on this also.

-Daelen

For me keeping the interior is critical.
After that tall guy compatibility would be the most important factor. Followed by the guarantee that it would pass tech inspection for PDX/HPDEs.

imjello · 08-10-2015, 06:53 PM

Sub'd

4TthAnnyZ · 08-10-2015, 07:40 PM

Solid vendor, Daelen will hook you guys up! Stay tuned for more sweet stuff from MA Motorsports!

Sub'd as well

Sent from my iPhone using Tapatalk

MAMotorsports · 08-19-2015, 01:56 PM

Test car was in here Monday/Tueday and the bar has been modified to work with stock belts.

If that was your only concern it has now been fixed and price will remain the same.

Let me know if you would like to get on the list!

-Daelen

MAMotorsports · 08-24-2015, 12:36 PM

Updated and names added!

Let me know if you would like in, we want to be able to get these built in the next couple weeks for you guys!

-Daelen

derraj06 · 08-25-2015, 09:08 AM

What would it cost to add guides or bolt in anchor points for the harnesses? Just curious.

ufoz8mycow · 08-25-2015, 03:07 PM

Quote:

Originally Posted by MAMotorsports

I will let you know

Since the interest is there, and stock belts seem to be a big factor. We are going to look into making changes if need be to make it work with stock belts. So, if that is anyone's only hindrance we should be able to fix that!

Good on you guys for listening to what the people want... I am also in the stock seatbelt boat because I still daily my car and wouldn't want to put this in/take it out every time I went to the track nor would I want to rock harnesses on a daily basis. In for updates on the stock belt situation with this.

08-05-2015, 10:24 AM	#16 (permalink)
TerribleONE A True Z Fanatic Join Date: Jan 2009 Location: Socal Posts: 10,203 Drives: WOT Rep Power: 5850	Highly doubt the stock belts will work as it looks like this mounts to the original belt location. If my plan for a half cage with a local builder doesn't work out, I will take one. __________________ 638WHP 541WTQ @ 13.5PSI Build thread

08-05-2015, 02:15 PM	#21 (permalink)
Carbon_z A True Z Fanatic Join Date: Sep 2009 Location: Atlanta, GA Posts: 1,694 Drives: Carbon Fiber 370z Rep Power: 19	Certain State laws require there to be a seat belt in use on highways, not harness. Just incase we need to strap on the seat belt __________________ Full Carbon Fiber Nissan 370z "400zTT" Fully Built 4.0L Twin Turbo 1300hp, 1100whp. Follow me on Instagram at http://www.instagram.com/carbonz.

08-06-2015, 11:59 AM	#23 (permalink)
MAMotorsports Track Member Join Date: Jul 2015 Location: Glen Arm, MD Posts: 872 Drives: 370Z Rep Power: 17	So we checked with some parts we had around the shop, current bar is a no go with seat belts. I should have a car up here very soon to mock up a new bar, so for anyone that was on the fence but needed stock belts. That will be fixed very soon. __________________ Daelen @ MA Motorsports MA-Motorsports.com https://www.facebook.com/pages/MA-Mo...C/125379858828

08-10-2015, 07:40 PM	#26 (permalink)
4TthAnnyZ Base Member Join Date: Jul 2014 Location: Saint Cloud, MN Posts: 171 Drives: 2010 40th Rep Power: 11	Solid vendor, Daelen will hook you guys up! Stay tuned for more sweet stuff from MA Motorsports! Sub'd as well Sent from my iPhone using Tapatalk AntiVenom and MAMotorsports like this.

08-19-2015, 01:56 PM	#27 (permalink)
MAMotorsports Track Member Join Date: Jul 2015 Location: Glen Arm, MD Posts: 872 Drives: 370Z Rep Power: 17	Test car was in here Monday/Tueday and the bar has been modified to work with stock belts. If that was your only concern it has now been fixed and price will remain the same. Let me know if you would like to get on the list! -Daelen __________________ Daelen @ MA Motorsports MA-Motorsports.com https://www.facebook.com/pages/MA-Mo...C/125379858828

08-10-2015, 06:53 PM	#25 (permalink)
imjello Enthusiast Member Join Date: Nov 2014 Location: texas Posts: 285 Drives: F80 M3, S5 B9 Rep Power: 13	Sub'd

08-24-2015, 12:36 PM	#28 (permalink)
MAMotorsports Track Member Join Date: Jul 2015 Location: Glen Arm, MD Posts: 872 Drives: 370Z Rep Power: 17	Updated and names added! Let me know if you would like in, we want to be able to get these built in the next couple weeks for you guys! -Daelen __________________ Daelen @ MA Motorsports MA-Motorsports.com https://www.facebook.com/pages/MA-Mo...C/125379858828

08-25-2015, 09:08 AM	#29 (permalink)
derraj06 Enthusiast Member Join Date: Jun 2013 Location: Huntsville, AL Posts: 406 Drives: MB 370z Rep Power: 12	What would it cost to add guides or bolt in anchor points for the harnesses? Just curious.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Z1 Motorsports: Metal HR/VHR Manifold 3 Bolt Gasket	John@Z1	Exhaust/Intake	27	09-09-2013 07:40 PM
[Showroom Motorsports] Rennen Forged Group Buy	Showroom Motorsports	Group Buys	3	06-08-2011 03:51 PM
Z1 Motorsports Reverse Fog Light Installation Harness Now Available!	Dustin@Z1	Z1 Motorsports	1	12-08-2010 07:17 PM