GT Motorsports: GTM Engine and Transmission Oil Cooler Kits!

RCZ · 02-26-2009, 11:04 PM

No no, thats actually a decent price. Nice job GTM.

alan93rsa · 03-12-2009, 09:11 PM

Which pump do you suggest for the transmission cooler? You do need one don't you?

Nice job on the oil cooler kit. Should sell.

George@GTM · 04-08-2009, 04:35 PM

That Transmission cooler is actually designed for an automatic transmission car, therefore no need for a pump.

We have a rear diff cooler we will be releasing soon, that kit comes with a pump.

-George
GT Motorsports

alan93rsa · 04-08-2009, 05:34 PM

George,

Thanks for the clarification.

For those looking at a cooler this is a good price. You can easily drop $400 in parts dropped at your door in a box.

George@GTM · 04-09-2009, 06:16 PM

Not a problem, sorry for the mis-understanding.

Just so you guys know we have these in stock!

-George
GT Motorsports

fstrnldr · 04-09-2009, 07:34 PM

Nice to see the thermostat in the filter adapter. I know the mocal piece i used in my last project set me back a couple hundred $'s alone, and this is more compact!

George@GTM · 04-10-2009, 04:33 PM

^^^ Yea a lot of companies don't offer this in their oil cooler kits, when in fact it is important to have.

-George
GT Motorsports

alan93rsa · 04-11-2009, 05:03 PM

Nothing like 6 or 7 quarts of cold oil hitting the cooler at 7000 rpm's. If you are lucky only a fitting joint will pop. If you don't have a thermostat you definitely need to exercise a little patience while warming up the engine. You should really do that anyway.

JB1 · 04-21-2009, 08:47 PM

George, do you have any pictures of an installed oil cooler?

wstar · 04-21-2009, 09:08 PM

How does having a cooler installed affect doing oil changes? When you remove the filter do you blow compressed air into some spot on the sandwich plate to force the oil back out of the cooler? And then how does the refill process go? Refill the stock amount, fire up the engine for a minute, then top off again with the cooler filled? I assume the added complication of the thermo plate means the change has to be done hot?

I asked about this in one of the Stillen cooler threads too, haven't seen any answer.

George@GTM · 04-23-2009, 01:36 PM

Quote:

Originally Posted by wstar

How does having a cooler installed affect doing oil changes? When you remove the filter do you blow compressed air into some spot on the sandwich plate to force the oil back out of the cooler? And then how does the refill process go? Refill the stock amount, fire up the engine for a minute, then top off again with the cooler filled? I assume the added complication of the thermo plate means the change has to be done hot?

I asked about this in one of the Stillen cooler threads too, haven't seen any answer.

You would change the oil just like a regular oil change. When you change your oil you aren't getting all of the oil out of the engine, just the majority of it - same thing with a cooler.

-George
GT Motorsports

wstar · 06-24-2009, 02:27 PM

Has anyone here used this kit (the GTM oil cooler) on the 370Z yet? I understand it's universal, just curious if anyone has experience installing it and what it entailed (which side you had to mount on, did you need to fab a bracket, or just a matter of drilling some holes and using the bracket in the kit, etc?).

nogoodname · 06-24-2009, 02:33 PM

380 for this isn't bad

_____________________________________

The Oil Cooler Kit is complete and includes all the necessary adapters, fittings, and hoses you will need for installation.

Items included with this kit:
(1) SETRAB cooler core
(1) 55" S.S. Braided hose with 45 degree swivel ends (-8AN)
(1) 48" S.S. Braided hose with 45 degree swivel ends (-8AN)
(1) Thermostatic oil adapter
(1) Mounting bracket
(2) -8AN22mm adapter fittings
(2) 13/16" Seal
(2) Insulated rubber clamp

COOLER SIZE 13" X 5.75" X 2 " 19 R 22MM

wstar · 06-24-2009, 02:39 PM

Quote:

Originally Posted by nogoodname007

380 for this isn't bad

I agree the price on this kit is nice, just wondering what I might be getting myself into install-wise since it's a universal application.

LiquidZ · 06-24-2009, 02:58 PM

380 for this kit is dang good.

03-12-2009, 09:11 PM	#17 (permalink)
alan93rsa Enthusiast Member Join Date: Feb 2009 Location: Ohio Posts: 412 Drives: 16 Cayman GT4 Red Rep Power: 220	Which pump do you suggest for the transmission cooler? You do need one don't you? Nice job on the oil cooler kit. Should sell. __________________ 16 Cayman GT4, Carmine Red, Buckets, PCCB etc.

04-08-2009, 05:34 PM	#19 (permalink)
alan93rsa Enthusiast Member Join Date: Feb 2009 Location: Ohio Posts: 412 Drives: 16 Cayman GT4 Red Rep Power: 220	George, Thanks for the clarification. For those looking at a cooler this is a good price. You can easily drop $400 in parts dropped at your door in a box. __________________ 16 Cayman GT4, Carmine Red, Buckets, PCCB etc.

04-11-2009, 05:03 PM	#23 (permalink)
alan93rsa Enthusiast Member Join Date: Feb 2009 Location: Ohio Posts: 412 Drives: 16 Cayman GT4 Red Rep Power: 220	Nothing like 6 or 7 quarts of cold oil hitting the cooler at 7000 rpm's. If you are lucky only a fitting joint will pop. If you don't have a thermostat you definitely need to exercise a little patience while warming up the engine. You should really do that anyway. __________________ 16 Cayman GT4, Carmine Red, Buckets, PCCB etc.

04-21-2009, 09:08 PM	#25 (permalink)
wstar A True Z Fanatic Join Date: Mar 2009 Location: Houston, TX Posts: 4,024 Drives: too slow Rep Power: 3594	How does having a cooler installed affect doing oil changes? When you remove the filter do you blow compressed air into some spot on the sandwich plate to force the oil back out of the cooler? And then how does the refill process go? Refill the stock amount, fire up the engine for a minute, then top off again with the cooler filled? I assume the added complication of the thermo plate means the change has to be done hot? I asked about this in one of the Stillen cooler threads too, haven't seen any answer. __________________ 7AT Track Car! Journal thread / Car setup details

06-24-2009, 02:27 PM	#27 (permalink)
wstar A True Z Fanatic Join Date: Mar 2009 Location: Houston, TX Posts: 4,024 Drives: too slow Rep Power: 3594	Has anyone here used this kit (the GTM oil cooler) on the 370Z yet? I understand it's universal, just curious if anyone has experience installing it and what it entailed (which side you had to mount on, did you need to fab a bracket, or just a matter of drilling some holes and using the bracket in the kit, etc?). __________________ 7AT Track Car! Journal thread / Car setup details

02-26-2009, 11:04 PM	#16 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	No no, thats actually a decent price. Nice job GTM.

04-08-2009, 04:35 PM	#18 (permalink)
George@GTM NOT AN ACTIVE VENDOR. DO NOT BUY Join Date: Dec 2008 Location: California Posts: 146 Drives: TTG41 Rep Power: 16	That Transmission cooler is actually designed for an automatic transmission car, therefore no need for a pump. We have a rear diff cooler we will be releasing soon, that kit comes with a pump. -George GT Motorsports

04-09-2009, 06:16 PM	#20 (permalink)
George@GTM NOT AN ACTIVE VENDOR. DO NOT BUY Join Date: Dec 2008 Location: California Posts: 146 Drives: TTG41 Rep Power: 16	Not a problem, sorry for the mis-understanding. Just so you guys know we have these in stock! -George GT Motorsports

04-09-2009, 07:34 PM	#21 (permalink)
fstrnldr Base Member Join Date: Apr 2009 Location: CA Posts: 170 Drives: Canyonero Rep Power: 16	Nice to see the thermostat in the filter adapter. I know the mocal piece i used in my last project set me back a couple hundred $'s alone, and this is more compact!

04-10-2009, 04:33 PM	#22 (permalink)
George@GTM NOT AN ACTIVE VENDOR. DO NOT BUY Join Date: Dec 2008 Location: California Posts: 146 Drives: TTG41 Rep Power: 16	^^^ Yea a lot of companies don't offer this in their oil cooler kits, when in fact it is important to have. -George GT Motorsports

04-21-2009, 08:47 PM	#24 (permalink)
JB1 Track Member Join Date: Mar 2009 Location: Chicagoland Posts: 748 Drives: 09 Nissan 370Z sold Rep Power: 17	George, do you have any pictures of an installed oil cooler?

06-24-2009, 02:33 PM	#28 (permalink)
nogoodname Lifetime Premium Join Date: Nov 2008 Location: Montreal Posts: 22,357 Drives: E46 M3 Rep Power: 1765	380 for this isn't bad _____________________________________ The Oil Cooler Kit is complete and includes all the necessary adapters, fittings, and hoses you will need for installation. Items included with this kit: (1) SETRAB cooler core (1) 55" S.S. Braided hose with 45 degree swivel ends (-8AN) (1) 48" S.S. Braided hose with 45 degree swivel ends (-8AN) (1) Thermostatic oil adapter (1) Mounting bracket (2) -8AN22mm adapter fittings (2) 13/16" Seal (2) Insulated rubber clamp COOLER SIZE 13" X 5.75" X 2 " 19 R 22MM

06-24-2009, 02:58 PM	#30 (permalink)
LiquidZ A True Z Fanatic Join Date: Nov 2008 Location: Columbus, OH Posts: 1,940 Drives: Mag. Black 2009 370Z Rep Power: 705	380 for this kit is dang good. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GT Motorsports: VQ37VHR Engine Internals Pistons, Rods, Stroker Kits	George@GTM	Forced Induction	92	12-04-2012 05:06 PM
GT Motorsports: Turbo Oil and Coolant line kits, Perfect for HKS TT	George@GTM	Forced Induction	0	12-30-2008 05:41 PM
Samurai Speed Breaks Their GT-R's Transmission!	sbsmoov	Other Vehicles	7	12-25-2008 12:02 PM
MotorAuthority--Nissan 370Z gets 332hp, rev-matched manual transmission 11.11.08	AK370Z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	0	11-11-2008 01:03 PM