Nissan 370Z Forum
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Forced Induction (http://www.the370z.com/forced-induction/)
-   -   BP sets the VQ HP bar high... dyno and video inside (http://www.the370z.com/forced-induction/98332-bp-sets-vq-hp-bar-high-dyno-video-inside.html)

Eclipz 11-19-2014 11:15 PM
How do you even put all that power to the ground? I guess the driver just likes laying black lines down the pavement.

otherwise, very impressive.

Mitco39 11-20-2014 08:53 AM
Quote:
Originally Posted by Boosted Performance (Post 3035120)
See you some time in May, maybe even April?

You better get that thing built to take a lot of abuse....the new 6870 turbo should be good for similar numbers posted above, with better response.
You know I want to, and if I wasn't saving for a Dyno the engine would be out and being built as we speak. I am thinking over the next winter the car will see some changes, thats if it survives another season the way it is. Its just so hard to mess with something that runs so well! haha

carlitos_370z 11-20-2014 09:01 AM
damn.... no words for this :drool:

jwick 11-20-2014 09:15 AM
Quote:
Originally Posted by Mitco39 (Post 3035531)
You know I want to, and if I wasn't saving for a Dyno the engine would be out and being built as we speak. I am thinking over the next winter the car will see some changes, thats if it survives another season the way it is. Its just so hard to mess with something that runs so well! haha
Saving for a dyno? Do tell...

Mitco39 11-20-2014 09:22 AM
Quote:
Originally Posted by jwick (Post 3035553)
Saving for a dyno? Do tell...
Well thats the only way Uprev would give me Pro Tuner status... so I had to do something about that :shakes head:.


lol naw I tune diesel trucks all over the place and am just getting to the point where it would be beneficial to have our own dyno setup. That being said if my car spends more time on it than any of our trucks I cant help that. lol

Staples 11-20-2014 08:23 PM
Yeah Dynosty knows their stuff. Anytime you hear big numbers on the VQ platform (minus AMS and the GTR), they're most likely involved.

http://youtu.be/fdbcD1g61fQ

Boosted Performance 11-20-2014 10:48 PM
Quote:
Originally Posted by Staples (Post 3036002)
Yeah Dynosty knows their stuff. Anytime you hear big numbers on the VQ platform (minus AMS and the GTR), they're most likely involved.

Insane 1000HP 350Z In Car Video - YouTube
Yup, they sure do. Now I need somebody to take their 370Z in to Dynosty for a complete engine build, so I can offer them a semi-redicilous discount on a twin scroll kit with the all new, recently released 6870 turbo from Precision....rated at 1,100HP. The turbo is a $1,000 upgrade from the standard 6266 that comes with the kit. It also comes only in a ball bearing configuration.

1LIFE 11-23-2014 06:15 PM
Quote:
Originally Posted by Boosted Performance (Post 3036068)
Yup, they sure do. Now I need somebody to take their 370Z in to Dynosty for a complete engine build, so I can offer them a semi-redicilous discount on a twin scroll kit with the all new, recently released 6870 turbo from Precision....rated at 1,100HP. The turbo is a $1,000 upgrade from the standard 6266 that comes with the kit. It also comes only in a ball bearing configuration.
Damn I would have been ALL over that offer, Dynosty is finishing up my build in the next few weeks. The last time I emailed you, you were several months behind on fabrication so I ended up going with Greddy TT. Our original plan was to use your kit though :tup:

Mr.Squeeze 12-01-2014 02:18 PM
Quote:
Originally Posted by Boosted Performance (Post 3034801)
I know this isn't a 370z or a G37, but I thought I post it anyway since it is a VQ, and one of the kits that I produce.....

I have had a customer that decided to do a bit of a custom mid mount kit, using a Precision 7675 T4 .96 a/r billet JB turbo. The run was made on the new DJ dyno at Dynosty. E85 fuel and 30psi of boost. The engine was built by the guys at Dynosty...IMO one of the best VQ builders in the United States.

The car was running out of fuel, so full HP potential was not reached. The numbers are still impressive if you ask me....



http://i137.photobucket.com/albums/q...ps0e8e893d.jpg


Video:

934WHP Built 350Z on Dynosty Dyno - YouTube


With the recent release of the all new PTE 6870 turbo, I would expect similar results with the VHR twin scroll kit.
Nice Sasha this is Ray's car ?

whiteZ34 12-01-2014 02:38 PM
Quote:
Originally Posted by Mr.Squeeze (Post 3044609)
Nice Sasha this is Ray's car ?
Squeeze, I think you should use Sasha's new 6870 turbo and see what you guys can really do lol :stirthepot:

Mr.Squeeze 12-01-2014 03:33 PM
Quote:
Originally Posted by whiteZ34 (Post 3044629)
Squeeze, I think you should use Sasha's new 6870 turbo and see what you guys can really do lol :stirthepot:
Trust me I am tempted lol. We shall see though I already have the 6766 I might change my mind though when the time comes though.

Juan@Fontana 12-01-2014 04:01 PM
.... well then.

Boosted Performance 12-01-2014 04:24 PM
Quote:
Originally Posted by Mr.Squeeze (Post 3044609)
Nice Sasha this is Ray's car ?

Sure is...too bad he ran out of fuel. I am sure the turbo had over 1,000whp in it. The 6870 turbo should have similar results to the dyno posted above.

Cell 12-01-2014 04:37 PM
Quote:
Originally Posted by Boosted Performance (Post 3044753)
Sure is...too bad he ran out of fuel. I am sure the turbo had over 1,000whp in it. The 6870 turbo should have similar results to the dyno posted above.
Possible to fit this 6870 turbo on a V1 kit?

whiteZ34 12-01-2014 05:07 PM
Quote:
Originally Posted by Mr.Squeeze (Post 3044696)
Trust me I am tempted lol. We shall see though I already have the 6766 I might change my mind though when the time comes though.
Can always upgrade my friend!:tup:


All times are GMT -5. The time now is 10:05 PM.
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2