Another DIY Twin Turbo kit (COMP oil-less turbos)

Rusty · 11-19-2014, 06:32 AM

Quote:

Originally Posted by thangcu35

Thanks for the great advices. Ill be pressure testing them using one of the turbo leak tester and submerge the ic under water.

Regarding the turbo, i also asked the comp turbo tech that same question. They told me that it does evaporate very slowly (didnt specify through where). They said every 3000-5000 miles just use a grease gun and pump about 3-4 times and thats more than enough to keep it full. The grease fitting looks like its removable.

A lot of the equipment I work on has a grease fitting on one side and a plug on the other side. Remove the plug and grease through the fitting. When grease comes out of the plug hole. You're done. Run equipment until it gets hot with the plug remove. Shut down and install plug. This way no grease is being forced past the seals when the grease gets hot. Also I never knew that grease evaporates. It just turns to wax with heat in my experience.

Wish you luck with your project. Can't wait to see it come to life.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Twin GT35 .63 A/R turbos $800 shipped	Vq'd240z	Parts for sale (Private Classifieds)	6	04-15-2014 04:42 PM
GTM Performance Engineering: Stage 2 Twin Turbo V2 w/GTX Turbos - CARB app submitted	SAM@GTM	Forced Induction	85	02-04-2014 01:30 AM
GTM MHI Twin Turbo vs. Fast Intentions Twin Turbo	isayimandrew	Forced Induction	26	05-29-2013 08:47 PM
FS: 2007 G35S Sedan, Prem, Nav, Tech Packages – GTM Installed and Tuned Twin Turbos	terrycs	Other Vehicle For sale	1	04-09-2013 06:25 PM
GTM Motorsports Twin Turbo vs Greddy Twin Turbo Kit	Nismo221	Forced Induction	57	08-16-2011 04:44 PM