BBR Mid Twin Turbo Kit

BBRSpeedWorks · 10-24-2014, 10:29 PM

Ok so alot of people have asked me to sell my turbo kit that i built. But due to the fact it's Boosted Performance's design i'm not going to sell it. I have been in the Lab (my garage) starting this which is a twin midmount turbo kit (i hope Sasha don't mind this) that can be installed in your driveway or garage. No engine removel necessary.
The best thing about the kit is it's under 10k with available upgrades. i'm looking for a 6mt & auto for R&D to inquire please pm me. After talking to Precision for about 2 hours on the turbo setup this is what we came up with. this setup should spool fast but support built motor's up to 1000 WHP. Let me here the Questions.I started on this build already but do to Getting my car ready for the dyno with the built motor. this well be slow over the next couple of weeks unless ironhide well donate his car.I hope he reads this tonight.But i have already sent my blue print in and started my patent...

BBR Twin Mid Mount Turbo kit
Hot side
Precision 5130 BB turbo's Vband in/out
Tial MV-R 38mm waste gates
304 stainless steel exhaust manifold's

Cold Side
Treadstone custom built Twin Turbo intercooler
Tial 50mm Q BOV"s
Intakes from the turbo's to behind the bumper's
Aluminum intercooler piping(powdercoated color of choice)
3" charge pipes
Stainless T-bolt's

Fuel
Black OPS 1000cc injectors(standard)
TRE 340lph fuel pump W/ harness

Oil
Greddy oil pan (+1qt oil capacity)
Exa 12V turbo scavenge pump W/harness
2 30 row oil cooler's
oil filter reloction kit w/K&N oil filter
All Stainless oil lines and fittings pressed on(not screw on)

Misc
UpRev tuner with base map
GTR spark plugs
All 304 stainless brackets and hardware
All welds 3 year warranty

batboyvaj · 10-24-2014, 11:18 PM

you'll sell way more single kits if you can get the price point down to 6k

Cell · 10-24-2014, 11:30 PM

Good stuff. I've asked Sasha about a twin mid mount before. I don't remember the answer.

I cannot wait till this is done and I would love to see the resultts.

BBRSpeedWorks · 10-24-2014, 11:33 PM

Quote:

Originally Posted by batboyvaj

you'll sell way more single kits if you can get the price point down to 6k

i would love to trust me but i dont want bad blood on me do to how i used alot from the BP set up.....but i well say this batboyvaj the frist kit 6mt and 7AT well be at cost.

BBRSpeedWorks · 10-24-2014, 11:34 PM

Quote:

Originally Posted by Cell

Good stuff. I've asked Sasha about a twin mid mount before. I don't remember the answer.

I cannot wait till this is done and I would love to see the resultts.

I just got off the phone with Ironhide and i think he well be the first 6mt kit....

batboyvaj · 10-24-2014, 11:44 PM

I understand why though

BBRSpeedWorks · 10-24-2014, 11:50 PM

I'm trying to keep the piece plus i wanted to design something of my own...

ironhide · 10-25-2014, 12:34 AM

I hear ya calling we'll get on it soon

BBRSpeedWorks · 10-25-2014, 12:36 AM

this well be fun

zguynate · 10-25-2014, 12:37 AM

Once again I applaud you for trying something new and different. Ill closely watch the build thread on this and wish you well on your journey!

BBRSpeedWorks · 10-25-2014, 12:40 AM

Quote:

Originally Posted by dragonbreath

Once again I applaud you for trying something new and different. Ill closely watch the build thread on this and wish you well on your journey!

thank you dragonbreath this one will move slow unless i get the donor car cuz i'm still building my block...

Chuck33079 · 10-25-2014, 09:18 AM

If you can figure a way to get this to fit for the 7AT guys, you'll sell a lot of kits once they've got some tranny upgrade options to handle the power.

VQStryker · 10-25-2014, 09:47 AM

Quote:

Originally Posted by BBRSpeedWorks

....twin midmount turbo kit (i hope Sasha don't mind this) that can be installed in your driveway or garage. No engine removel necessary.....

sounds like my idea.... guess I shouldn't have said anything.

Chance build

batboyvaj · 10-25-2014, 10:09 AM

How many different places are there to mount turbos? I guess most of the twin turbo kit makers are copying greddy or gtm? More kits will eventually bring the cost of turbo kits down. Isn't that a good thing for the community?

BBRSpeedWorks · 10-25-2014, 10:34 AM

Quote:

Originally Posted by VQStryker

sounds like my idea.... guess I shouldn't have said anything.

Chance build

Well not really. I do like what you are doing and hope you the best but if I took anyone's idea it would be Cell cuz he said like a year ago...but if you feel that way please pm. I'm not here to piss people off just want to help...

10-24-2014, 10:29 PM	#1 (permalink)
BBRSpeedWorks Premium Member Join Date: Dec 2013 Location: Ft. Stwart Posts: 366 Drives: 370z,350z,300z,talon Rep Power: 11	BBR Mid Twin Turbo Kit Ok so alot of people have asked me to sell my turbo kit that i built. But due to the fact it's Boosted Performance's design i'm not going to sell it. I have been in the Lab (my garage) starting this which is a twin midmount turbo kit (i hope Sasha don't mind this) that can be installed in your driveway or garage. No engine removel necessary. The best thing about the kit is it's under 10k with available upgrades. i'm looking for a 6mt & auto for R&D to inquire please pm me. After talking to Precision for about 2 hours on the turbo setup this is what we came up with. this setup should spool fast but support built motor's up to 1000 WHP. Let me here the Questions.I started on this build already but do to Getting my car ready for the dyno with the built motor. this well be slow over the next couple of weeks unless ironhide well donate his car.I hope he reads this tonight.But i have already sent my blue print in and started my patent... BBR Twin Mid Mount Turbo kit Hot side Precision 5130 BB turbo's Vband in/out Tial MV-R 38mm waste gates 304 stainless steel exhaust manifold's Cold Side Treadstone custom built Twin Turbo intercooler Tial 50mm Q BOV"s Intakes from the turbo's to behind the bumper's Aluminum intercooler piping(powdercoated color of choice) 3" charge pipes Stainless T-bolt's Fuel Black OPS 1000cc injectors(standard) TRE 340lph fuel pump W/ harness Oil Greddy oil pan (+1qt oil capacity) Exa 12V turbo scavenge pump W/harness 2 30 row oil cooler's oil filter reloction kit w/K&N oil filter All Stainless oil lines and fittings pressed on(not screw on) Misc UpRev tuner with base map GTR spark plugs All 304 stainless brackets and hardware All welds 3 year warranty Mkai0, ANMVQ and MyKindaGuise like this. __________________ God'Z Gift.

10-24-2014, 11:18 PM	#2 (permalink)
batboyvaj Base Member Join Date: Jun 2011 Location: mn Posts: 111 Drives: 2011 370z Rep Power: 14	you'll sell way more single kits if you can get the price point down to 6k BBRSpeedWorks likes this.

10-24-2014, 11:30 PM	#3 (permalink)
Cell A True Z Fanatic Join Date: Jan 2010 Location: Chicago Posts: 1,449 Drives: A Garbage Truck Rep Power: 21	Good stuff. I've asked Sasha about a twin mid mount before. I don't remember the answer. I cannot wait till this is done and I would love to see the resultts. BBRSpeedWorks likes this.

10-24-2014, 11:50 PM	#7 (permalink)
BBRSpeedWorks Premium Member Join Date: Dec 2013 Location: Ft. Stwart Posts: 366 Drives: 370z,350z,300z,talon Rep Power: 11	I'm trying to keep the piece plus i wanted to design something of my own... __________________ God'Z Gift.

10-25-2014, 12:34 AM	#8 (permalink)
ironhide Base Member Join Date: Jun 2012 Location: georgia Posts: 12 Drives: 2013 370z mb/6 speed Rep Power: 13	I hear ya calling we'll get on it soon BBRSpeedWorks likes this.

10-24-2014, 11:44 PM	#6 (permalink)
batboyvaj Base Member Join Date: Jun 2011 Location: mn Posts: 111 Drives: 2011 370z Rep Power: 14	I understand why though

10-25-2014, 12:36 AM	#9 (permalink)
BBRSpeedWorks Premium Member Join Date: Dec 2013 Location: Ft. Stwart Posts: 366 Drives: 370z,350z,300z,talon Rep Power: 11	this well be fun __________________ God'Z Gift.

10-25-2014, 12:37 AM	#10 (permalink)
zguynate A True Z Fanatic Join Date: Jan 2012 Location: Strangeland Posts: 1,054 Drives: 09 370z Rep Power: 73	Once again I applaud you for trying something new and different. Ill closely watch the build thread on this and wish you well on your journey! __________________ 2009 370z touring w/sports package

10-25-2014, 09:18 AM	#12 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	If you can figure a way to get this to fit for the 7AT guys, you'll sell a lot of kits once they've got some tranny upgrade options to handle the power. gbrettin, megalapagas and Prototyper5 like this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

10-25-2014, 10:09 AM	#14 (permalink)
batboyvaj Base Member Join Date: Jun 2011 Location: mn Posts: 111 Drives: 2011 370z Rep Power: 14	How many different places are there to mount turbos? I guess most of the twin turbo kit makers are copying greddy or gtm? More kits will eventually bring the cost of turbo kits down. Isn't that a good thing for the community?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Which stage of twin-turbo/twin-supercharger kit should I get?	Nuc370z	Forced Induction	13	12-30-2015 08:15 PM
Twin Turbo vs. Single Turbo V6: A Dissertation	Mike@GTM	Forced Induction	115	08-14-2014 10:04 PM
Twin scroll vs twin turbo	SS_Firehawk	Forced Induction	32	04-13-2014 01:02 PM
GTM MHI Twin Turbo vs. Fast Intentions Twin Turbo	isayimandrew	Forced Induction	26	05-29-2013 09:47 PM
GTM Motorsports Twin Turbo vs Greddy Twin Turbo Kit	Nismo221	Forced Induction	57	08-16-2011 05:44 PM