Boosted Performance V 2.0 turbo list

jwick · 01-03-2016, 03:28 PM

The y-pipe gets completely replaced by piping that comes with the kit. I'm not familiar with the Ark exhaust. The kit works with any exhaust that keeps the stock mid-pipe flange connection. If the Ark doesn't fit that category then you might have to have the downpipe custom fabed to mate up.

TopgunZ · 01-03-2016, 04:46 PM

I think the arks work.

Boosted Performance · 01-03-2016, 10:15 PM

Quote:

Originally Posted by TopgunZ

I think the arks work.

It does not.

Boosted Performance · 01-03-2016, 10:25 PM

Quote:

Originally Posted by Diabel

Here you are the comparision between 6266 and 6766, the similar boost pressure, about 1.2-1.3 bar decreasing to 1.1 bar in case of 6266. All the dynos are with the HKS EVC 6 Boost Controller.

The key points from my point of view and experience with both turbos:

- 6266 is better for stock engine
- 6266 flow isn't sufficient for boost more than 1.3 >> 1.1 bar - you can see that on the picture, torque and HP peak at 6600RPM are decreasing rapidly, it means the turbo is on his maximum efficiency
- 6766 - the best option in my opinion, turbo lag isn't the issue here, moreover - in my application the spool is even faster!
- 6766 is the better option for the future upgrade
- 6766 spools to the very end, we put 1.4 bar currently and the boost is stable to the end

Thanks for the feedback on the turbos. What A/R turbine do you have on your built engine? 680WHP and 660ft/tq is the highest of all my 370z customers...and by the looks of it this is pump gas.

It is also very close to where my other 350z customers have been maxing out on built engines and pump gas...one managed to hit the 700whp mark with a 6766 T4 1.32 a/r turbine. This was at about 19psi of boost. The 6766 is a very capable turbo.

Diabel · 01-04-2016, 07:05 AM

Quote:

Originally Posted by Boosted Performance

Thanks for the feedback on the turbos. What A/R turbine do you have on your built engine? 680WHP and 660ft/tq is the highest of all my 370z customers...and by the looks of it this is pump gas.

Sasha it's a A/R 1.15 S ported 4" to 2.5".

But it's not on the pump gas, it's on the 100 octane european gas with only 10% of Ethanol.

Guys, I highly recommend the BP Kit - if you havn't pull the trigger yet you should definitely check the real street performance on my Z's roll race videos with new BMW M6, Nissan GTR (stock and tuned), new Audi RS6, 2JZ 700HP Supra and more on my 370z FB

Boosted Performance · 01-04-2016, 02:42 PM

Quote:

Originally Posted by Diabel

Sasha it's a A/R 1.15 S ported 4" to 2.5".

But it's not on the pump gas, it's on the 100 octane european gas with only 10% of Ethanol.

Guys, I highly recommend the BP Kit - if you havn't pull the trigger yet you should definitely check the real street performance on my Z's roll race videos with new BMW M6, Nissan GTR (stock and tuned), new Audi RS6, 2JZ 700HP Supra and more on my 370z FB

Thank you for the support. You would really benefit from going to the 1.32 a/r turbine housing. There is no reason you would not get to about 720whp with the switch to a larger turbine housing, while keeping boost pressure the same.

Also, for those looking at these kits, the V 1.5 kits are capable of simmilar numbers as well, as the 6766 turbo does work with that version of the kit.

I have 4 of these in stock...just waiting for the IC pipes to arrive, otherwise they are ready to go.

whiteZ34 · 01-04-2016, 03:07 PM

Quote:

Originally Posted by Boosted Performance

Thank you for the support. You would really benefit from going to the 1.32 a/r turbine housing. There is no reason you would not get to about 720whp with the switch to a larger turbine housing, while keeping boost pressure the same.

Also, for those looking at these kits, the V 1.5 kits are capable of simmilar numbers as well, as the 6766 turbo does work with that version of the kit.

I have 4 of these in stock...just waiting for the IC pipes to arrive, otherwise they are ready to go.

Sasha, I have messaged you about a turbo

Parello9 · 01-04-2016, 05:54 PM

Is this available for UK cars?

Boosted Performance · 01-04-2016, 06:01 PM

Quote:

Originally Posted by whiteZ34

Sasha, I have messaged you about a turbo

PM sent

Quote:

Originally Posted by Parello9

Is this available for UK cars?

Sorry, I cannot confirm fitment. The steering knuckle would interfere with the air filter.

PongSanity · 01-04-2016, 06:38 PM

Ark exhaust does not work? Care to elaborate for this is what I have. I did notify the fabricator at the car shop that we may have to do some cut and welding. He told me to shut up and hurry get the kit.

Sent from my iPhone using Tapatalk

hc_416 · 01-06-2016, 10:10 PM

PM'ed

Drew303 · 01-08-2016, 06:09 PM

sent you a PM. ready for a new turbo. Only question is cartridge or ball bearing.

overtureZ · 01-11-2016, 04:22 AM

Hey Boosted Proformance! I was wondering if you had a single turbo kit for sale?

PongSanity · 01-12-2016, 06:37 PM

Has anyone used z1 csc elimination kit with the BP turbo kit or the ZSPEED HD csc...

Sent from my iPhone using Tapatalk

jwick · 01-12-2016, 06:57 PM

Quote:

Originally Posted by PongSanity

Has anyone used z1 csc elimination kit with the BP turbo kit or the ZSPEED HD csc...

Sent from my iPhone using Tapatalk

Pretty sure all of us who have upgraded clutches are running either the ZSpeed HD or the Tilton Specialty Z offers. Z1 Elimination doesn't work with this kit.

01-03-2016, 03:28 PM	#826 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	The y-pipe gets completely replaced by piping that comes with the kit. I'm not familiar with the Ark exhaust. The kit works with any exhaust that keeps the stock mid-pipe flange connection. If the Ark doesn't fit that category then you might have to have the downpipe custom fabed to mate up. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

01-03-2016, 04:46 PM	#827 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	I think the arks work. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Diabel's Boosted Performance Single Turbo Build	Diabel	Member's 370Z Gallery	129	06-19-2019 07:40 AM
Boosted Performance turbo kit self install (review)	Cell	Forced Induction	87	10-24-2017 10:38 AM
Boosted Performance single turbo build	Boosted Performance	Forced Induction	1841	09-06-2016 12:17 PM
Boosted Performance single turbo results	Boosted Performance	Forced Induction	136	06-18-2014 06:40 PM
Boosted Performance round 2 list	Boosted Performance	Forced Induction	1480	06-03-2014 09:44 AM

01-04-2016, 05:54 PM	#833 (permalink)
Parello9 Base Member Join Date: Nov 2014 Location: UK Posts: 27 Drives: Bagged 370z Rep Power: 11	Is this available for UK cars?

01-04-2016, 06:38 PM	#835 (permalink)
PongSanity Enthusiast Member Join Date: Jul 2014 Location: Virgin Islands Posts: 261 Drives: '09 G37s KH3 6MT Rep Power: 11	Ark exhaust does not work? Care to elaborate for this is what I have. I did notify the fabricator at the car shop that we may have to do some cut and welding. He told me to shut up and hurry get the kit. Sent from my iPhone using Tapatalk

01-06-2016, 10:10 PM	#836 (permalink)
hc_416 Enthusiast Member Join Date: Aug 2013 Location: CT Posts: 254 Drives: g37 Rep Power: 12	PM'ed

01-08-2016, 06:09 PM	#837 (permalink)
Drew303 Base Member Join Date: Jan 2014 Location: Denver, Co Posts: 142 Drives: 2011 Turbo Nismo Rep Power: 11	sent you a PM. ready for a new turbo. Only question is cartridge or ball bearing.

01-11-2016, 04:22 AM	#838 (permalink)
overtureZ Enthusiast Member Join Date: Dec 2015 Location: Middle TN Age: 30 Posts: 319 Drives: Da Boosted Z Rep Power: 9	Hey Boosted Proformance! I was wondering if you had a single turbo kit for sale?

01-12-2016, 06:37 PM	#839 (permalink)
PongSanity Enthusiast Member Join Date: Jul 2014 Location: Virgin Islands Posts: 261 Drives: '09 G37s KH3 6MT Rep Power: 11	Has anyone used z1 csc elimination kit with the BP turbo kit or the ZSPEED HD csc... Sent from my iPhone using Tapatalk